So I've recently purchased the ck3pro with probe v2 and flashing via usb, on jungleflasher it shows in Com my ck3 and status is ready with drive in vendor more and ready to extract. With my probe in standby I set it in the R707 hole and it lights up green with the light standby light on as well. When I power the probe, both lights go off and when I press dvdkey32 to extract I get serial data bad. I saw in a video that the green light has to stay on when the probe is powered. Anyone knows if that's the problem or if I'm missing something.
The 707 does work and has nothing to do with the dash. Not sure what you mean won't work. If the drive has never been dumped, it can be dumped via 707. Just did one the other day on new dash just fine. If the drive has already been modded and you do NOT have the keys, then you need to do a full dump or PMT.
i guess i was using the term "full dump" loosely, you know, in the way that lt firmware requires a full dump... or one of the newer alternatives; pmt, lizard etc.
tbh i've only been using a grounded probe since the pmt method went public, but i saw a few topics on other forums saying that older methods i.e. bridging r707 didnt work on liteons with 0251. maybe it was just old info or just bs.
