So i tried junglefasher and it locked up during the erase process. drive won't open now so i believe it is bricked. I have my key and the original firmware. How do I flash the original back to start over? I also used firmtool box to inject the key into the custom firmware, but not sure what to do after that.
Originally posted by SFisher21: So i tried junglefasher and it locked up during the erase process. drive won't open now so i believe it is bricked. I have my key and the original firmware. How do I flash the original back to start over? I also used firmtool box to inject the key into the custom firmware, but not sure what to do after that.
thanks for the help.
Permanently bricking the benq is pretty difficult even with a bad flash. Make sure you power it on with the tray half-open and try, try, try again. Don't restart your computer, but do restart your console before you try flashing again. Give your computer/jungle flasher a few minutes to re-recognize the drive and the priority sequence. You can also try switching the sata ports, trying, and switching back. This has worked for me a couple times. Also, when you try again, use "intro/read", instead of Benq unlock.
"All drives should be updated to Lite Touch + (LT+) firmware if playing on XBOX live. Samsung drives and pre-78/79 Hitachi drives do not utilize AP 2.5. All other drives are considered to be detectable by Microsoft (YMMV). Make sure all rips are ABGX verified, contain SSv2, and patched AP2.5 (where needed). XGD3 must currently be burned on new drive with PC Burner Max firmware for 100% rip. All modded consoles can be potentially unsafe for use on XBOX live."
