|
Bricked a 9504
|
|
|
Modking30
AfterDawn Addict
|
8. April 2011 @ 23:33 |
Link to this message
|
I apparently thought I was fine when I dumped my 9504 with my lizard on 1.0.4 firmware. I then flashed with JF when LT was released and got an error. Long story short I found out that the firmware for the Lizard didn't dump the proper data and that I had to update my lizard firmware before hand and redump with that. I have all the files I need except for the serial.bin which I guess is what I need. Guess I'm screwed according to vgcrepairs and maximus. I have tried recreating the CFW with the files I have etc. No go. I may try and send it to M$ for a repair and hope I get lucky. Any thoughts?
|
|
Advertisement
|
 |
|
|
Member
|
9. April 2011 @ 00:03 |
Link to this message
|
Originally posted by Modking30:
I apparently thought I was fine when I dumped my 9504 with my lizard on 1.0.4 firmware. I then flashed with JF when LT was released and got an error. Long story short I found out that the firmware for the Lizard didn't dump the proper data and that I had to update my lizard firmware before hand and redump with that. I have all the files I need except for the serial.bin which I guess is what I need. Guess I'm screwed according to vgcrepairs and maximus. I have tried recreating the CFW with the files I have etc. No go. I may try and send it to M$ for a repair and hope I get lucky. Any thoughts?
Sounds like you rushed into this one. I'm not sure if you follow Maximus on twitter but here are their posts after the firmware was released,
1. "Congratulations to C4E for the 9504 LT Slim Fw release, we are working now on release a new TBX/gecko to handle it in the following hours."
2. "Gecko 1.07 and TBX B016 under testing by the betatester team, working very well so far. We r waiting more results before go public in hours."
3. "Positive response of the Beta Testers we are releasing TBX & GECKO 1.07 by 9:30 PM (GMT-6) Congrats to C4E for his Fair play on this release."
4. "Gecko 1.07, TBX B016 to support 9504 CFW are Public now, visit 360lizard.com on the NEWS page for full note."
Hope you was able to get the key off the drive. I do wish you the best because nobody wants to have a Slim as a door stop. Keep your fingers crossed and keep at it.
This message has been edited since posting. Last time this message was edited on 9. April 2011 @ 00:05
|
|
widowmaka
Member
|
9. April 2011 @ 06:16 |
Link to this message
|
Originally posted by Modking30:
I apparently thought I was fine when I dumped my 9504 with my lizard on 1.0.4 firmware. I then flashed with JF when LT was released and got an error. Long story short I found out that the firmware for the Lizard didn't dump the proper data and that I had to update my lizard firmware before hand and redump with that. I have all the files I need except for the serial.bin which I guess is what I need. Guess I'm screwed according to vgcrepairs and maximus. I have tried recreating the CFW with the files I have etc. No go. I may try and send it to M$ for a repair and hope I get lucky. Any thoughts?
there is a guide there now on 360lizard which tell you how to unbrick your drive using the scorpion probe modking.hope it helps
|
|
Modking30
AfterDawn Addict
|
9. April 2011 @ 08:10 |
Link to this message
|
|
I think that will only get the drive back in vendor mode. I believe the FW is erased so I'm screwed. I did rush, but didn't care thinking my dump would save me if needed.
Again I have the keys but it's from the 1.0.4 dump and I'm told those are no good as they don't have all the information.
This message has been edited since posting. Last time this message was edited on 9. April 2011 @ 08:11
|
Senior Member
|
9. April 2011 @ 08:23 |
Link to this message
|
Assuming that the rules for flashing still fall in line with the old standards... I wouldn't give up hope for that drive.
MAYBE, you have enough information to rebuild a full serial bin from your own or somebody else's drive. I haven't dumped a slim yet with the lizard as I've only been playing with it for a few days now. If I do come across anything, I'll be keeping your particular predicament in mind while I research. Hopefully,(you might be able to build a serial bin from someone elses drive that may be compatible with yours, for instance, when people lost their old stock data from their drives and used a generic stock firmware to reflash back before updating to LT+, if you follow me)....we just need to understand this concept a bit more however.
Good luck bro.
"All drives should be updated to Lite Touch + (LT+) firmware if playing on XBOX live. Samsung drives and pre-78/79 Hitachi drives do not utilize AP 2.5. All other drives are considered to be detectable by Microsoft (YMMV). Make sure all rips are ABGX verified, contain SSv2, and patched AP2.5 (where needed). XGD3 must currently be burned on new drive with PC Burner Max firmware for 100% rip. All modded consoles can be potentially unsafe for use on XBOX live."
This message has been edited since posting. Last time this message was edited on 9. April 2011 @ 08:28
|
|
Modking30
AfterDawn Addict
|
9. April 2011 @ 08:30 |
Link to this message
|
|
I was wondering the same thing if that is possible. Are the serial.bin's different?
|
Senior Member
|
9. April 2011 @ 08:40 |
Link to this message
|
Originally posted by Modking30:
I was wondering the same thing if that is possible. Are the serial.bin's different?
I'm assuming so, considering the terminology they are using is "full serial bin,"...otherwise I don't see why they wouldn't have just used a general serial bin from all 9504 drives as part of the downloads to work off of, instead of having to read them from the drives themselves.
Does full serial data.bin contain reproducible drive information, is the question we should be asking.
"All drives should be updated to Lite Touch + (LT+) firmware if playing on XBOX live. Samsung drives and pre-78/79 Hitachi drives do not utilize AP 2.5. All other drives are considered to be detectable by Microsoft (YMMV). Make sure all rips are ABGX verified, contain SSv2, and patched AP2.5 (where needed). XGD3 must currently be burned on new drive with PC Burner Max firmware for 100% rip. All modded consoles can be potentially unsafe for use on XBOX live."
|
Senior Member
|
9. April 2011 @ 11:27 |
Link to this message
|
|
damn that blows,i was gonna use my lizard on these,but seeing how easy Jf was to dump em i was like what the hell its easier,hope you get that drive back from the dead
|
|
Modking30
AfterDawn Addict
|
9. April 2011 @ 12:39 |
Link to this message
|
|
Yeah it's my fault for not waiting. I called the customer. He may try and bring it back to the store. I'll keep you posted.
|
Senior Member
|
9. April 2011 @ 17:56 |
Link to this message
|
Originally posted by infam0us:
damn that blows,i was gonna use my lizard on these,but seeing how easy Jf was to dump em i was like what the hell its easier,hope you get that drive back from the dead
After trying the lizard, I'm still favoring Lizard. There's just a small learning curve and it's still early on so there are going to be a few things to iron out. I am more than ecstatic about it the Maximus Lizard. Easily worth the money.
However, I just might pick up the xbox360usb as well to cover all of my bases. Why not?
"All drives should be updated to Lite Touch + (LT+) firmware if playing on XBOX live. Samsung drives and pre-78/79 Hitachi drives do not utilize AP 2.5. All other drives are considered to be detectable by Microsoft (YMMV). Make sure all rips are ABGX verified, contain SSv2, and patched AP2.5 (where needed). XGD3 must currently be burned on new drive with PC Burner Max firmware for 100% rip. All modded consoles can be potentially unsafe for use on XBOX live."
|
Senior Member
|
11. April 2011 @ 01:57 |
Link to this message
|
well i did my 1st flash with a lizard last night great results just followed the video on there site,i was seeing a video c4eva posted on the dump and write times on lizard vs usb pro,i was like wow,i want to try a usb pro now,
http://team-xecuter.com/9504_speedtest/
This message has been edited since posting. Last time this message was edited on 11. April 2011 @ 01:58
|
|
Modking30
AfterDawn Addict
|
11. April 2011 @ 08:04 |
Link to this message
|
|
Thought the same thing
|
|
peluynati
Senior Member
|
11. April 2011 @ 09:11 |
Link to this message
|
myself i am feeling a little bummed about the lizard mostly for having to wait an additional 8 hours for the firmware pack, by the way c4eva made for us, but as far as buying the usbpro i have not decided seems like waiting a few more seconds does not justify paying another 60 dollars for another device, as far as the drive that is without keys, as a last result you may try to install the beta dash i am understanding that it re-flashes the drive that would cause backups not to work, but it may bring it back to life, if it does not you could at least contact microsoft and tell them that you installed it and now your machine does not work anymore?
|
|
Modking30
AfterDawn Addict
|
11. April 2011 @ 09:23 |
Link to this message
|
Originally posted by peluynati:
myself i am feeling a little bummed about the lizard mostly for having to wait an additional 8 hours for the firmware pack, by the way c4eva made for us, but as far as buying the usbpro i have not decided seems like waiting a few more seconds does not justify paying another 60 dollars for another device, as far as the drive that is without keys, as a last result you may try to install the beta dash i am understanding that it re-flashes the drive that would cause backups not to work, but it may bring it back to life, if it does not you could at least contact microsoft and tell them that you installed it and now your machine does not work anymore?
I am in the same boat here. To me a dump was always a dump regardless. Now the other main thing I have read is the x360usb doesn't need clips for liteons as it has the PMT method built in. Is this correct? I hate the clips!
|
|
peluynati
Senior Member
|
11. April 2011 @ 09:41 |
Link to this message
|
|
yes no more clipping is what i have read as well, its really disappointing but i hate to spend another 90 for the usb pro and the probe, i guess i'll be patient this time and wait for a price drop LOL
|
|
Modking30
AfterDawn Addict
|
11. April 2011 @ 10:26 |
Link to this message
|
|
I thought the entire thing was under $60. I already have an xtractor I could use. If I can sell my lizard, I'm switching. Max has no intent of making it a PMT which you can do manually. Waiting for the gecko to release and dump issues pissed me off too much.
|
|
peluynati
Senior Member
|
11. April 2011 @ 11:53 |
Link to this message
|
|
the probe III is 16 dollars, usb pro is 60 so thats 76 plus shipping if you want the complete kit, i will probably break down and buy it, going to wait until they are shipping with cases though, i had a really bad feeling about the lizard but they got my business with the not cut sell, i should have known that it would be widely available after its release.
|
|
coorva
Suspended due to non-functional email address
|
11. April 2011 @ 12:10 |
Link to this message
|
jungleflasher with my PC with onboard VIA chipset,always works,dont trust anything that has the word lizard in it lol,,
microsoft after a ban wave |
Senior Member
|
11. April 2011 @ 12:31 |
Link to this message
|
|
now i want a damn usb pro,argh
|
|
Modking30
AfterDawn Addict
|
11. April 2011 @ 12:44 |
Link to this message
|
Yeah I'm not a happy camper. I will think twice in the future for buying any maximus products. Bull crap that a dump in earlier FW is no good. Box was sent into M$ today for a repair. Hopefully they will fix the console for me. Anywhere recommend a good site to get that x360usb?
|
Senior Member
|
11. April 2011 @ 12:55 |
Link to this message
|
Originally posted by Modking30:
Yeah I'm not a happy camper. I will think twice in the future for buying any maximus products. Bull crap that a dump in earlier FW is no good. Box was sent into M$ today for a repair. Hopefully they will fix the console for me. Anywhere recommend a good site to get that x360usb?
http://www.xconsoles.com/xecuter-x360usb-pro.html
i just may buy one also,but my 1st dump and write with lizard came out good,but still has me thinking
This message has been edited since posting. Last time this message was edited on 11. April 2011 @ 12:56
|
|
peluynati
Senior Member
|
11. April 2011 @ 13:13 |
Link to this message
|
|
yeah i defiantly learned a valuable lesson, i will never stray away from teamx again, ANY BODY WANT TO BUY A LIZARD LOL!!!
|
|
Modking30
AfterDawn Addict
|
11. April 2011 @ 13:28 |
Link to this message
|
Originally posted by peluynati:
yeah i defiantly learned a valuable lesson, i will never stray away from teamx again, ANY BODY WANT TO BUY A LIZARD LOL!!!
What was your lesson? Me? lol
|
|
peluynati
Senior Member
|
11. April 2011 @ 18:07 |
Link to this message
|
no i learned my lesson when i set here at my computer for 18 hours waiting on the firmware release, also when i received the lizard i was unable to flash hitachi's which was stupid why release something if it is not ready to be used. i've had a really bad experience with team lizard, lesson was well learned
|
|
Advertisement
|
|
|
|
m4r0v3r
Member
1 product review
|
12. April 2011 @ 06:54 |
Link to this message
|
how about this for the new fix. try updating to the beta dash, and maybe, just maybe the console will be able to flash the drive for you and update it to the 0272 firmware. that might be a fix for all those consoles people broke. this is all theory of course
|
