umm... i fixed quite a few xboxes the rrod.... but this one has me stumped... it is an elite, falcon mb. the error switches between 0010 and 0100. it started out as an e74 problem but when i did the x-clamp fix and it returned with rrod then i tried the the heatgun method as well, no luck... any suggestions?
Ultimate Sticky> Ultimate RROD Thread 0010 There is a problem with the Southbridge Chip usually dealing with how it connects to the mainboard (cold solder joint/bridged solder joints)
0101 (not yet known)
take off the gpu heatsink and keep the heatgun on the gpu for about 1min,,just the gpu,,on both sides of the board,,i had one of those to and did that,,what do i have to lose,,so i baked the gpu till there was smoke coming from the board,,let it cool for a half hour,and three months later still going strong,,cheers
Originally posted by coorva: take off the gpu heatsink and keep the heatgun on the gpu for about 1min,,just the gpu,,on both sides of the board,,i had one of those to and did that,,what do i have to lose,,so i baked the gpu till there was smoke coming from the board,,let it cool for a half hour,and three months later still going strong,,cheers
