|
imgburn error
|
|
|
carina_ann
Newbie
|
6. September 2011 @ 06:21 |
Link to this message
|
hi,
ive burnt a few xbox 360 games with imgburn and now all of a sudden i keep getting error messages, can anyone help, here is the log
; //****************************************\\
; ImgBurn Version 2.5.5.0 - Log
; Tuesday, 06 September 2011, 11:08:05
; \\****************************************//
;
;
I 10:40:36 ImgBurn Version 2.5.5.0 started!
I 10:40:36 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7600)
I 10:40:36 Total Physical Memory: 2,026,424 KB - Available: 623,732 KB
W 10:40:36 Drive E:\ (FAT32) does not support single files > 4 GB in size.
I 10:40:36 Initialising SPTI...
I 10:40:36 Searching for SCSI / ATAPI devices...
I 10:40:36 -> Drive 1 - Info: hp DVD RW AD-7701H 2.85 (F:) (ATAPI)
I 10:40:36 Found 1 DVD±RW/RAM!
I 10:42:35 Operation Started!
I 10:42:35 Source File: C:\Users\Carina\Downloads\Kinect.Sports.XBOX360-MARVEL\Kinect Sports.dvd
I 10:42:35 Source File Sectors: 3,827,488 (MODE1/2048)
I 10:42:35 Source File Size: 7,838,695,424 bytes
I 10:42:35 Source File Volume Identifier: DVD_ROM
I 10:42:35 Source File Volume Set Identifier: 1b018000MS UDFBridge
I 10:42:35 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 10:42:35 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 10:42:35 Source File File System(s): ISO9660, UDF (1.50)
I 10:42:35 Destination Device: [0:1:0] hp DVD RW AD-7701H 2.85 (F:) (ATAPI)
I 10:42:35 Destination Media Type: DVD+R DL (Disc ID: UMEDISC-DL1-64) (Speeds: 2.4x, 4x, 6x)
I 10:42:35 Destination Media Sectors: 4,173,824
I 10:42:35 Write Mode: DVD
I 10:42:35 Write Type: DAO
I 10:42:35 Write Speed: 2.4x
I 10:42:35 Link Size: Auto
I 10:42:35 Lock Volume: Yes
I 10:42:35 Test Mode: No
I 10:42:35 OPC: No
I 10:42:35 BURN-Proof: Enabled
I 10:42:35 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x)
I 10:42:35 User Specified L0 Data Zone Capacity: 1,913,760
I 10:42:44 Set L0 Data Zone Capacity Succeeded!
I 10:42:45 Filling Buffer... (40 MB)
I 10:42:46 Writing LeadIn...
I 10:42:50 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487)
I 10:42:50 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)
I 10:42:50 Writing Layer 0... (LBA: 0 - 1913759)
I 11:03:40 Writing Layer 1... (LBA: 1913760 - 3827487)
W 11:03:49 Failed to Write Sectors 1914304 - 1914335 - Reason: Power Calibration Area Error
W 11:03:49 Retrying (1 of 20)...
W 11:03:49 Retry Failed - Reason: Write Error
W 11:03:49 Retrying (2 of 20)...
W 11:03:49 Retry Failed - Reason: Write Error
W 11:03:49 Retrying (3 of 20)...
W 11:03:49 Retry Failed - Reason: Write Error
W 11:03:49 Retrying (4 of 20)...
W 11:03:49 Retry Failed - Reason: Write Error
W 11:03:49 Retrying (5 of 20)...
W 11:03:49 Retry Failed - Reason: Write Error
W 11:03:49 Retrying (6 of 20)...
W 11:03:49 Retry Failed - Reason: Write Error
W 11:03:49 Retrying (7 of 20)...
W 11:03:49 Retry Failed - Reason: Write Error
W 11:03:49 Retrying (8 of 20)...
W 11:03:49 Retry Failed - Reason: Write Error
W 11:03:49 Retrying (9 of 20)...
W 11:03:49 Retry Failed - Reason: Write Error
W 11:03:49 Retrying (10 of 20)...
W 11:03:49 Retry Failed - Reason: Write Error
W 11:03:49 Retrying (11 of 20)...
W 11:03:49 Retry Failed - Reason: Write Error
W 11:03:49 Retrying (12 of 20)...
W 11:03:49 Retry Failed - Reason: Write Error
W 11:03:49 Retrying (13 of 20)...
W 11:03:49 Retry Failed - Reason: Write Error
W 11:03:49 Retrying (14 of 20)...
W 11:03:49 Retry Failed - Reason: Write Error
W 11:03:49 Retrying (15 of 20)...
W 11:03:49 Retry Failed - Reason: Write Error
W 11:03:49 Retrying (16 of 20)...
W 11:03:49 Retry Failed - Reason: Write Error
W 11:03:49 Retrying (17 of 20)...
W 11:03:49 Retry Failed - Reason: Write Error
W 11:03:49 Retrying (18 of 20)...
W 11:03:49 Retry Failed - Reason: Write Error
W 11:03:49 Retrying (19 of 20)...
W 11:03:49 Retry Failed - Reason: Write Error
W 11:03:49 Retrying (20 of 20)...
W 11:03:49 Retry Failed - Reason: Write Error
W 11:06:26 Retrying (21)...
W 11:06:26 Retry Failed - Reason: Write Error
W 11:06:27 Retrying (22)...
W 11:06:27 Retry Failed - Reason: Write Error
E 11:06:29 Failed to Write Sectors 1914304 - 1914335 - Reason: Power Calibration Area Error
I 11:06:29 Synchronising Cache...
W 11:06:40 User opted to skip the 'Close Track/Session/Disc' functions.
E 11:06:40 Failed to Write Image!
I 11:06:40 Exporting Graph Data...
I 11:06:40 Graph Data File: C:\Users\Carina\AppData\Roaming\ImgBurn\Graph Data Files\hp_DVD_RW_AD-7701H_2.85_06-SEPTEMBER-2011_10-42_UMEDISC-DL1-64_2.4x.ibg
I 11:06:40 Export Successfully Completed!
E 11:06:40 Operation Failed! - Duration: 00:24:05
I 11:06:40 Average Write Rate: 2,698 KB/s (1.9x) - Maximum Write Rate: 3,359 KB/s (2.4x)
I 11:08:05 Close Request Acknowledged
I 11:08:05 Closing Down...
I 11:08:05 Shutting down SPTI...
I 11:08:05 ImgBurn closed!
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
6. September 2011 @ 06:32 |
Link to this message
|
Quote:
I 10:42:35 Destination Media Type: DVD+R DL (Disc ID: UMEDISC-DL1-64) (Speeds: 2.4x, 4x, 6x)
The only DL disks to use (according to the ImgBurn Forum) are Verbatim DVD+R DL.
Anything else, sooner or later, always ends in tears.
|
Senior Member
|
6. September 2011 @ 06:37 |
Link to this message
|
Firmware 2.86 is available for your burner. Sometimes updating a burner's firmware can lead to better burns with certain discs.
It probably is just the discs though, as mentioned above. When you buy cheaper ones, the dye used on the disc can often vary, so one lot of Memorex might use a different batch of dye to another lot, for example.
I would try updating your burner's firmware. If that's no good, try burning at a faster speed, cos slowest does not always equal best. If that's no good, try some Verbatim discs (which I would use anyway, to be honest). And if all that is no good, the burner might just be on the way out.
Click HERE for up to date 360 tutorials that may help you! This message has been edited since posting. Last time this message was edited on 6. September 2011 @ 06:38
|
|
carina_ann
Newbie
|
6. September 2011 @ 06:41 |
Link to this message
|
|
thanks, ive been looking at other peoples discussions and that does seem to be the main problem, i will have to go and get some.
i just thought it was weird as it had burnt quite a few games before this error started.
are there any other programs i could use instead
|
|
carina_ann
Newbie
|
6. September 2011 @ 06:52 |
Link to this message
|
Originally posted by funksoulb:
Firmware 2.86 is available for your burner. Sometimes updating a burner's firmware can lead to better burns with certain discs.
thanks, i dont mean to sound stupid but how would i go about updating the firmware.
thanks for your help
|
Senior Member
|
6. September 2011 @ 10:22 |
Link to this message
|
To update a burner's firmware, you just download the updater and run it. Once it's done, it'll usually ask you to reboot your computer and that's it.
Click HERE for up to date 360 tutorials that may help you! |
AfterDawn Addict
|
6. September 2011 @ 12:45 |
Link to this message
|
In ImgBurn, once past the initial selection wizard screen.
Tools > Drive > Check for firmware updates.
|
AfterDawn Addict
|
6. September 2011 @ 15:11 |
Link to this message
|
Originally posted by carina_ann:
thanks, ive been looking at other peoples discussions and that does seem to be the main problem, i will have to go and get some.
Yes, brand of media is a very common problem when burning 360 games.
Originally posted by carina_ann:
i just thought it was weird as it had burnt quite a few games before this error started.
The reason for that is that the Aone discs you were using, don't have consistancy in how they were manufactured. The ones that failed on you are more than likely just slightly different from the ones that worked for you. The Verbatims you are going to get are always the same, so if they work, they always will.
I'm more impressed that you burned successfully with Aone, but are still willing to understand that they are still most likely your problem. Most people simply post back saying "My discs are not the problem because they worked for me before", without understanding the big picture.
Originally posted by carina_ann:
are there any other programs i could use instead
I wouldn't recommend anything other than ImgBurn, but if you must stray, go no further than CloneCD.
|
|
carina_ann
Newbie
|
6. September 2011 @ 16:11 |
Link to this message
|
|
thanks everyone for your help, i must have been lucky to get those few games to work on the cheap disks. ive ordered some verbatims so hopefully that will do the trick.
thanks again and hopefully i wont be needing anymore help!
|
AfterDawn Addict
|
8. September 2011 @ 19:27 |
Link to this message
|
Originally posted by carina_ann:
thanks everyone for your help, i must have been lucky to get those few games to work on the cheap disks.
It's not luck. For the record, all brands of CADs work. The problem is that (even if burned correctly) they usually work. Top quality discs like Verbatim and Taiyo-Yuden always work (assuming you burn correctly). The other problem is that CADs deteriorate much much much faster than top quality discs.
Originally posted by carina_ann:
thanks again and hopefully i wont be needing anymore help!
Um, Right :)
|
|
carina_ann
Newbie
|
9. September 2011 @ 03:16 |
Link to this message
|
|
well, i bought some verbatims and so far so good. should have just went out and bought them in the first place. thanks guys for the help
|
|
cooll903
Member
|
9. September 2011 @ 05:25 |
Link to this message
|
The only DL disks to use (according to the ImgBurn Forum) are Verbatim DVD+R DL.
Anything else, sooner or later, always ends in tears.
that is why i always have another back up on my computer on a spare HDD so when the disk dies i don't have to get out the store bought disk. just burn it from the HDD and you back up and running. i use memorex and my sammy reads them just fine
|
AfterDawn Addict
|
9. September 2011 @ 13:17 |
Link to this message
|
Originally posted by carina_ann:
well, i bought some verbatims and so far so good. should have just went out and bought them in the first place. thanks guys for the help
Haven't you heard?
Verb's the word.
Everybody's heard about the Verb.
|
|
Advertisement
|
|
|
|
bagerkeon
Newbie
|
10. September 2011 @ 03:14 |
Link to this message
|
Originally posted by eebeejay:
Originally posted by carina_ann:
well, i bought some verbatims and so far so good. should have just went out and bought them in the first place. thanks guys for the help
Haven't you heard?
Verb's the word.
Everybody's heard about the Verb.
lol the verbs the word bah haha
Yes make sure your up to date and using dem verbs :)
|
