|
|
|
ImgBurn question! Here's the log!
|
|
|
murkerson
Newbie
|
29. June 2010 @ 21:02 |
Link to this message
|
Will Memorex work or only Verbatim? If Memorex will work, at what speed do I need to burn it at? I heard like with Verbatim it has to be 2.4, but that Memorex it needs to be set at 8. Is that right? I have burned at 2.4 with Memorex, but to no avail. Please help. And I don't know if this is in the right section, if not, sorry. As you can tell I am a noob!
I 20:15:56 ImgBurn Version 2.5.1.0 started!
I 20:15:56 Microsoft Windows Vista Home Premium Edition (6.0, Build 6000)
I 20:15:56 Total Physical Memory: 2,086,720 KB - Available: 1,012,696 KB
I 20:15:56 Initialising SPTI...
I 20:15:56 Searching for SCSI / ATAPI devices...
I 20:15:56 -> Drive 1 - Info: HL-DT-ST DVDRAM GSA-T20N WG02 (E:) (ATA)
I 20:15:56 Found 1 DVD±RW/RAM!
I 20:19:05 Operation Started!
I 20:19:05 Source File: C:\My Music\Red Dead Redemption [RF] [X360]\rdr.dvd
I 20:19:05 Source File Sectors: 3,827,488 (MODE1/2048)
I 20:19:05 Source File Size: 7,838,695,424 bytes
I 20:19:05 Source File File System(s): None
I 20:19:05 Destination Device: [1:0:0] HL-DT-ST DVDRAM GSA-T20N WG02 (E:) (ATA)
I 20:19:05 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x, 4x, 6x)
I 20:19:05 Destination Media Sectors: 4,173,824
I 20:19:05 Write Mode: DVD
I 20:19:05 Write Type: DAO
I 20:19:05 Write Speed: 8x
I 20:19:05 Link Size: Auto
I 20:19:05 Lock Volume: Yes
I 20:19:05 Test Mode: No
I 20:19:05 OPC: No
I 20:19:05 BURN-Proof: Enabled
W 20:19:05 Write Speed Miscompare! - Wanted: 11,080 KB/s (8x), Got: 8,310 KB/s (6x)
I 20:19:05 Book Type Setting: N/A
I 20:19:05 User Specified L0 Data Zone Capacity: 1,913,760
I 20:20:09 Set L0 Data Zone Capacity Succeeded!
I 20:20:09 Filling Buffer... (40 MB)
I 20:20:09 Writing LeadIn...
I 20:20:14 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487)
I 20:20:14 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)
I 20:20:14 Writing Layer 0... (LBA: 0 - 1913759)
I 20:33:09 Writing Layer 1... (LBA: 1913760 - 3827487)
I 20:46:30 Synchronising Cache...
I 20:46:33 Closing Track...
I 20:46:41 Finalising Disc...
I 20:47:51 Exporting Graph Data...
I 20:47:51 Graph Data File: C:\Users\lita crumby\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GSA-T20N_WG02_TUESDAY-JUNE-29-2010_8-19_PM_RITEK-S04-66_8x.ibg
I 20:47:51 Export Successfully Completed!
I 20:47:51 Operation Successfully Completed! - Duration: 00:28:45
I 20:47:51 Average Write Rate: 4,860 KB/s (3.5x) - Maximum Write Rate: 8,414 KB/s (6.1x)
I 20:47:51 Cycling Tray before Verify...
Okay, So....I am using Memosux! I have tried a few times now to burn this with no avail! Says its there but it will not play! I put it in and it says "Open Tray" on my console. Thats it! Nothing! What's going wrong, besides the fact that its not a Verbatim?
And thought I would also add that I have tried at both 2.4 and 8x speeds.
This message has been edited since posting. Last time this message was edited on 30. June 2010 @ 07:51
|
|
Advertisement
|
 |
|
|
Moderator
|
30. June 2010 @ 07:56 |
Link to this message
|
Thread teleported out of the old type xbox forums.
I don't ever do dual layer writing (or xbox 360 backups/burning for that mnatter) so unless i spot something meaningful in your imgburn log i will leave the imgburn issue itself to the xbox 360 regular posters
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***This message has been edited since posting. Last time this message was edited on 30. June 2010 @ 07:57
|
|
murkerson
Newbie
|
30. June 2010 @ 11:16 |
Link to this message
|
|
Thank you and people please help me!
|
AfterDawn Addict
|
30. June 2010 @ 16:20 |
Link to this message
|
Yeah Memorex work, just like all the other cheap media, but just like all the other cheap media, Memorex is not consistent at all.
My story: When I burned my first 360 game about 3 years ago (Gears of War), it was on a Memorex. Even though everyone said use Verbatim, I used Memorex, because I get them for free, and had a couple hundred of them. I burned it, and it worked. I wondered what the hell they said use Verbatims for when my Memorex worked fine. But out of the first 5 games burned, only 2 worked. I burned 2 copies of Gears of War for system linking. Only one of them worked, even though they were from the same ISO. Only 1 of 3 copies of Halo 3 worked, even though they were from the same ISO also. So I tried a handful of other games. Some worked, some didn't. That's when I learned about disc consistency being a major factor (the discs are not always the same). I got some "expensive" Taiyo-Yudens and Verbatims. They worked flawlessly every single time (and from those same ISOs as before). The copies of Gears and Halo 3 on the Memorex discs stopped working after about 5 months even though I never really played them because I was using the Verbatim copies, which still work today.
My advice, is to use a "good" disc (Verbatim or Taiyo-Yuden) follow every step as instructed (including checking with abgx360), perfect your procedure, then when you "have it down to a science", try the cheap discs if you still want to use them. But keep in mind, Verb are only a dollar a disc.
Unless I'm missing something in you ImgBurn log, it seems fine which is why I'm suggesting you try better media.
|
|
murkerson
Newbie
|
1. July 2010 @ 04:34 |
Link to this message
|
Originally posted by eebeejay:
Yeah Memorex work, just like all the other cheap media, but just like all the other cheap media, Memorex is not consistent at all.
My story: When I burned my first 360 game about 3 years ago (Gears of War), it was on a Memorex. Even though everyone said use Verbatim, I used Memorex, because I get them for free, and had a couple hundred of them. I burned it, and it worked. I wondered what the hell they said use Verbatims for when my Memorex worked fine. But out of the first 5 games burned, only 2 worked. I burned 2 copies of Gears of War for system linking. Only one of them worked, even though they were from the same ISO. Only 1 of 3 copies of Halo 3 worked, even though they were from the same ISO also. So I tried a handful of other games. Some worked, some didn't. That's when I learned about disc consistency being a major factor (the discs are not always the same). I got some "expensive" Taiyo-Yudens and Verbatims. They worked flawlessly every single time (and from those same ISOs as before). The copies of Gears and Halo 3 on the Memorex discs stopped working after about 5 months even though I never really played them because I was using the Verbatim copies, which still work today.
My advice, is to use a "good" disc (Verbatim or Taiyo-Yuden) follow every step as instructed (including checking with abgx360), perfect your procedure, then when you "have it down to a science", try the cheap discs if you still want to use them. But keep in mind, Verb are only a dollar a disc.
Unless I'm missing something in you ImgBurn log, it seems fine which is why I'm suggesting you try better media.
Do you use ImgBurn as well? And what is this abgx360? All I have is ImgBurn. I thought all I had to do was load the game file and that imgburn does the rest? I did change the layer break and try it at different speeds but still nothing.
|
|
brooksonj
Suspended permanently
|
1. July 2010 @ 06:54 |
Link to this message
|
|
|
Senior Member
|
1. July 2010 @ 15:56 |
Link to this message
|
Since you do not know what ABGX is I have to ask, is your xbox flashed? If so, what firmware do you have and what game is it that you are trying to play. There could be a wave issue. If not then you can burn that game a million times and it will never play. ---Chikn
|
|
murkerson
Newbie
|
1. July 2010 @ 17:06 |
Link to this message
|
Originally posted by brooksonj:
http://www.lmgtfy.com/?q=abgx
Ok so now I am officailly pissed lol. I bought some Verbatim DVD+R DL 2.4x and tried to use them and again, to no avail! Somebody please tell me what the hell I am doing wrong? Could it be a bad file or what? It wouldn't burn if the file were no good, would it? Please help me as I am about ready to throw this console in the highway!
|
Senior Member
|
1. July 2010 @ 17:52 |
Link to this message
|
You could update the firmware of your burner. The firmware that's running on it now is old.
Do the burns verify? You cut the ImgBurn log short.
Which firmware is your 360 DVD drive flashed with?
Have you tried the burned discs on someone else's flashed 360?
|
Senior Member
|
2. July 2010 @ 00:51 |
Link to this message
|
Originally posted by murkerson:
Originally posted by brooksonj:
http://www.lmgtfy.com/?q=abgx
Ok so now I am officailly pissed lol. I bought some Verbatim DVD+R DL 2.4x and tried to use them and again, to no avail! Somebody please tell me what the hell I am doing wrong? Could it be a bad file or what? It wouldn't burn if the file were no good, would it? Please help me as I am about ready to throw this console in the highway!
If you don't provide the info we ask for it will be difficult to sort out your problem. There may be other issues to troubleshoot besides the brand of your discs. ---Chikn
|
|
murkerson
Newbie
|
4. July 2010 @ 07:42 |
Link to this message
|
Originally posted by funksoulb:
You could update the firmware of your burner. The firmware that's running on it now is old.
Do the burns verify? You cut the ImgBurn log short.
Which firmware is your 360 DVD drive flashed with?
Have you tried the burned discs on someone else's flashed 360?
Burns do verify. No idea what firmware the 360 has on it as I bought it used. It does play the burned games tho, cause it came with 20 of them and they play. I have ABGX360 now and this is what I get when checking the ISO http://paste2.org/p/903157 So, could it be that the file(game) isn't a good file?
|
|
Tru_Husla
Junior Member
|
4. July 2010 @ 16:16 |
Link to this message
|
the firmware on your DVD drive is more than likely just outdated. You need one of the newer firmwares in order to play the newer games.
This message has been edited since posting. Last time this message was edited on 4. July 2010 @ 16:17
|
Senior Member
|
5. July 2010 @ 00:24 |
Link to this message
|
Originally posted by Tru_Husla:
the firmware on your DVD drive is more than likely just outdated. You need one of the newer firmwares in order to play the newer games.
Likely a bad file with that ABGX log. You can try to UnRAR the files again then re-run ABGX. ---Chikn
This message has been edited since posting. Last time this message was edited on 5. July 2010 @ 00:24
|
|
murkerson
Newbie
|
6. July 2010 @ 20:59 |
Link to this message
|
Originally posted by Tru_Husla:
the firmware on your DVD drive is more than likely just outdated. You need one of the newer firmwares in order to play the newer games.
I am playing other new games tho. Like right now we are playing Call of Juarez:BIB and its working fine. How would i update it tho?
|
Senior Member
|
7. July 2010 @ 00:23 |
Link to this message
|
Originally posted by murkerson:
Originally posted by Tru_Husla:
the firmware on your DVD drive is more than likely just outdated. You need one of the newer firmwares in order to play the newer games.
I am playing other new games tho. Like right now we are playing Call of Juarez:BIB and its working fine. How would i update it tho?
Dude, Are you so eager to play this game that you overlook the obvious? Look at your own ABGX log:
Checking for updates to abgx360.dat...
Server file abgx360.dat no newer than local file - not retrieving
ERROR: C:\Users\lita crumby\Documents\Vuze Downloads\Red Dead Redemption [RF] [X
360]\rdr.iso isn't recognized as an XBOX 360 ISO or Stealth file!
Press any key to exit . . .
You have NO CLUE! I give up...
This message has been edited since posting. Last time this message was edited on 7. July 2010 @ 00:25
|
|
jairomalo
Junior Member
|
7. July 2010 @ 01:47 |
Link to this message
|
whould you know the step by step to flash a benq kbox 360, (what to buy to connect xbox360 to computer, list of what i need to download, and tell me whats a ix15Benq and where to download it and the same for jungleflasher.
cantinflas
This message has been edited since posting. Last time this message was edited on 7. July 2010 @ 01:58
|
|
murkerson
Newbie
|
7. July 2010 @ 08:05 |
Link to this message
|
Originally posted by ChiknLitl:
Originally posted by murkerson:
Originally posted by Tru_Husla:
the firmware on your DVD drive is more than likely just outdated. You need one of the newer firmwares in order to play the newer games.
I am playing other new games tho. Like right now we are playing Call of Juarez:BIB and its working fine. How would i update it tho?
Dude, Are you so eager to play this game that you overlook the obvious? Look at your own ABGX log:
Checking for updates to abgx360.dat...
Server file abgx360.dat no newer than local file - not retrieving
ERROR: C:\Users\lita crumby\Documents\Vuze Downloads\Red Dead Redemption [RF] [X
360]\rdr.iso isn't recognized as an XBOX 360 ISO or Stealth file!
Press any key to exit . . .
You have NO CLUE! I give up...
No shit sherlock holmes! If you read my comment you will see me asking does that mean its an invalid file. If you were here to help instead of bash ppl you would be more of an asset to the world douchebag! I didn't come here to read your smart ass comments, I came here for help.
|
|
Advertisement
|
|
|
Senior Member
|
7. July 2010 @ 12:39 |
Link to this message
|
Originally posted by murkerson:
Originally posted by ChiknLitl:
Originally posted by murkerson:
Originally posted by Tru_Husla:
the firmware on your DVD drive is more than likely just outdated. You need one of the newer firmwares in order to play the newer games.
I am playing other new games tho. Like right now we are playing Call of Juarez:BIB and its working fine. How would i update it tho?
Dude, Are you so eager to play this game that you overlook the obvious? Look at your own ABGX log:
Checking for updates to abgx360.dat...
Server file abgx360.dat no newer than local file - not retrieving
ERROR: C:\Users\lita crumby\Documents\Vuze Downloads\Red Dead Redemption [RF] [X
360]\rdr.iso isn't recognized as an XBOX 360 ISO or Stealth file!
Press any key to exit . . .
You have NO CLUE! I give up...
No shit sherlock holmes! If you read my comment you will see me asking does that mean its an invalid file. If you were here to help instead of bash ppl you would be more of an asset to the world douchebag! I didn't come here to read your smart ass comments, I came here for help.
Umm...Have you read any of my posts above, such as:
"...what firmware do you have and what game is it that you are trying to play. There could be a wave issue. If not then you can burn that game a million times and it will never play."
OR
"Likely a bad file with that ABGX log. You can try to UnRAR the files again then re-run ABGX. ---Chikn".
You did not provide any responses. Your loss.
|
|
