|
Lite-on Key Extraction
|
|
|
mdjd
Junior Member
|
19. July 2009 @ 00:37 |
Link to this message
|
So I have been working on this for the last 2 or 3 days now with no success. I'm trying to flash my Lite-On DG162DS, but I cannot extract the key. I get ****Warning*** Serial Data Is Bad in JF. In ExtractorReader it says something like "Error sending ATAPI".
-I built my own probe twice using this stickied tutorial.
-I have an ASUS A8N-SLI DELUXE with onboard SATA (I read in the forums someone has successfully flashed a lite-on with this mobo).
-I have JungleFlasher 1.64 with PortIO32 installed.
-Both JF and ExtractorReader pick up my 360 drive.
-I only have COM1 and I did the HyperTerminal test (Successful).
-360 drive is hooked to SATA1.
I'm not sure what to do...I've read the forums and tried tons of different methods for extraction, but nothing works. Any help would be greatly appreciated.
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
2 product reviews
|
19. July 2009 @ 00:43 |
Link to this message
|
You are getting the tray in half way correct?
As a last resort, since you are using the serial connection, you could boot to DOS and use DVDkey that way. I have a tutorial linked in my signature on how to make a bootable USB drive. Here is the link for DVDkey v1.2 for DOS.
http://www.megaupload.com/?d=FUVXTQ8X
|
|
mdjd
Junior Member
|
19. July 2009 @ 00:59 |
Link to this message
|
Yes, as far as I can tell the tray is correct.
I hit the eject button. Unplug the power from the back of the drive. Push tray half way in. Plug power back into the back of the drive. (XBOX 360 stays on the entire time).
I just formatted the flash drive...So I put the DVDkey program on that and boot the PC in MS-DOS mode...then open the DVDkey program from the drive? Thank you.
|
AfterDawn Addict
2 product reviews
|
19. July 2009 @ 01:04 |
Link to this message
|
The DVDkey DOS program is designed to use COM1, which is what you are using. So you would put the dvdkey.exe on the USB drive a boot to it. Get the drive in half tray status and you will need to know what your SATA port that your Lite-ON is connected to. Example: Mine is EC00 so you would type:
dvdkey.exe EC00
Start probing the R707 hole and hit enter. Hopefully you will retrieve the info.
|
|
mdjd
Junior Member
|
19. July 2009 @ 01:47 |
Link to this message
|
|
It said the INQUIRY.bin and IDENTIFY.bin saved, but then it said "I'm sorry, it did not work. SEGA: 54 Nothing received from COM port. "
|
AfterDawn Addict
2 product reviews
|
19. July 2009 @ 01:48 |
Link to this message
|
If you look on top of the Lite-ON on the label in the left hand corner, what is the firmware revision?
|
|
mdjd
Junior Member
|
19. July 2009 @ 01:52 |
Link to this message
|
|
74850C
So since I was able to save two of the .bin files, does that mean my probe is working correctly?
|
AfterDawn Addict
2 product reviews
|
19. July 2009 @ 02:12 |
Link to this message
|
Originally posted by mdjd:
74850C
So since I was able to save two of the .bin files, does that mean my probe is working correctly?
You will still need to get the key. Normally there is the Key.bin, Inquiry.bin, and Identify.bin. And with Win32 programs, they will create a dummy bin.
I believe the Inquiry and Identify are dumped via SATA. Is it a possibility they key-reader is no good. I know you said you tested it out though.
This message has been edited since posting. Last time this message was edited on 19. July 2009 @ 02:18
|
|
mdjd
Junior Member
|
19. July 2009 @ 02:20 |
Link to this message
|
|
Well I didn't actually test the key extractor...I just did the hyperterminal test which I think just tests the COM port. How can I test the key extractor? I read something about using a multimeter but I wasn't able to find anything that explained how to do it...
I also tried to connect the two parts on R707 that you can solder...I used a small flathead screwdriver and I tried taping a small piece of a paper clip to it...both didn't work...They came up with the same errors as if I used the key extractor/spear...
This message has been edited since posting. Last time this message was edited on 19. July 2009 @ 02:27
|
|
mdjd
Junior Member
|
19. July 2009 @ 17:44 |
Link to this message
|
|
I've also been reading something about swapping the RX/TX points...What are the RX/TX points and how do you swap them?
|
|
Advertisement
|
|
|
AfterDawn Addict
2 product reviews
|
19. July 2009 @ 18:19 |
Link to this message
|
Originally posted by mdjd:
I've also been reading something about swapping the RX/TX points...What are the RX/TX points and how do you swap them?
Not quite for sure what exactly swapping the points are. I'm guessing it is an issue with the probe. I see you made a post in bhetrick's guide. So maybe he will shed some light.
|
