Originally posted by SMARTYP:

---

im trying to flash my liteon drive, jungleflasher shows an error, and ck3 tool says key.bin contains an invalid key when i try to retrieve the key.

the drive is stock and has never been messed with before.

HELP

thnx in advance

smartyp

---

Originally posted by leerage:

---

Do not continue flashing. You need to try to dump the key again. What are you using? Probe, spear, or homemade?

Also, what firmware revision is the Lite-ON? On the label on the top of the drive in the right hand corner will tell you.

Try using Jungle Flasher to dump the key.

---

Originally posted by SMARTYP:

---

Originally posted by leerage:

---

Do not continue flashing. You need to try to dump the key again. What are you using? Probe, spear, or homemade?

Also, what firmware revision is the Lite-ON? On the label on the top of the drive in the right hand corner will tell you.

Try using Jungle Flasher to dump the key.

---

I am using CK3 Probe, and FW Ver is 74850C << is this the correct thing you asked for?

And i have tryed JungleFlasher, i still get WARNING - Bad Serial

---

Originally posted by SMARTYP:

---

Serial to USB, i dont have a serial port

---

Originally posted by leerage:

---

Originally posted by SMARTYP:

---

Serial to USB, i dont have a serial port

---

Do you have the USB drivers installed?

---

Originally posted by SMARTYP:

---

Originally posted by leerage:

---

Originally posted by SMARTYP:

---

Serial to USB, i dont have a serial port

---

Do you have the USB drivers installed?

---

Yes,

Im going to try now on my other computer, ill let you know if it works, but any other ideas why it didnt work earlier??

thnx

---

Originally posted by leerage:

---

Originally posted by SMARTYP:

---

Originally posted by leerage:

---

Originally posted by SMARTYP:

---

Serial to USB, i dont have a serial port

---

Do you have the USB drivers installed?

---

Yes,

Im going to try now on my other computer, ill let you know if it works, but any other ideas why it didnt work earlier??

thnx

---

Not for sure why exactly. There is drivers for WinXP and Vista so you need to have the right one for your OS. Always install the driver before running JF.

---

Originally posted by leerage:

---

Is there a COM4? Try it if there is.

Also, is your Lite-ON being detected? PLDS DG-16D2S?

---

Originally posted by leerage:

---

What are the properties of COM3 and COM4. Is there any other COMs you can choose?

---

Originally posted by SMARTYP:

---

Originally posted by leerage:

---

What are the properties of COM3 and COM4. Is there any other COMs you can choose?

---

com properties:
port: com4
type:USB
name: Prolific USB-to-Serial comm port
status: ready

and i have about 3 others

---

Originally posted by leerage:

---

Originally posted by SMARTYP:

---

Originally posted by leerage:

---

What are the properties of COM3 and COM4. Is there any other COMs you can choose?

---

com properties:
port: com4
type:USB
name: Prolific USB-to-Serial comm port
status: ready

and i have about 3 others

---

I am pretty sure COM4 is the one you want. When you look at the drive properties in the lower left hand corner, what does it say?

---

Originally posted by SMARTYP:

---

lights up and stays lit through the process, goes off when removed.

i will try using my chipset instead, i got the same problem last time.

ive read of people havin the same problem, but never have i read a solution.

---

Originally posted by leerage:

---

Originally posted by SMARTYP:

---

lights up and stays lit through the process, goes off when removed.

i will try using my chipset instead, i got the same problem last time.

ive read of people havin the same problem, but never have i read a solution.

---

What is your onboard SATA chipset?

---

Originally posted by leerage:

---

So you got the CK3 Lite with the serial connection and you have it connected to the serial to USB cable?

---

Originally posted by SMARTYP:

---

Originally posted by leerage:

---

So you got the CK3 Lite with the serial connection and you have it connected to the serial to USB cable?

---

Correct, and a question, what colour does the LED have to be on the CK3 itself, mine is blue atm.

---

Originally posted by PS2Menace:

---

Originally posted by SMARTYP:

---

Originally posted by leerage:

---

So you got the CK3 Lite with the serial connection and you have it connected to the serial to USB cable?

---

Correct, and a question, what colour does the LED have to be on the CK3 itself, mine is blue atm.

---

Turn it to red (modeB off), since you're not using a Hitachi. Doubt that will help you though. If all else fails, order a PCI SATA card with a VIA 6241 chipset.

---