|
Mother of all error messages
|
|
|
TonyJer
Member
|
12. October 2010 @ 08:32 |
Link to this message
|
Have now given up hope of ever using VIA 6421 due to the 3249 properties constantly being inserted by Vista 32 bit. (Have tried everything imaginable to delete and replace with 6421 drivers (prior to disable, delete, re-enable etc etc).
Have 5 internal SATAs but could only have two available as the others are in use (including 0). Hooked up to 4, ran JF and now get ?Windows cannot access the specified, device, path or file. You may not have appropriate permission to access the item?!
Any advice would be greatly appreciated. Just about to give up after 4 weeks or turmoil and stress.
Thanks
Tony
Am still using CK3 connectivity kit
|
|
Advertisement
|
 |
|
|
|
Modking30
AfterDawn Addict
|
12. October 2010 @ 09:19 |
Link to this message
|
The Via card is needed for a reason. It's the chipset that matters. If you don't have a via chipset it won't work As in, it won't ever find the drive. Again, you keep posting this same thread over and over and obviously haven't read the ultimate sticky that gives you STEP BY STEP instructions. I would advise having someone with Xbox modding experience do it since you obviously cannot even search.
|
AfterDawn Addict
|
12. October 2010 @ 12:12 |
Link to this message
|
Ease up on him. I've PM'ed with him on a few issues involving this. He says that his card he bought IS a VIA 6421, but shows up as a 3249. The guy he bought it from (off ebay) says it needs the drivers installed to be recognized as a 6421. Everything he tells me insinuates that he understands the flashing concept/procedure quite well. It's just that the card isn't doing what it's supposed to, which says to me that the flea-bay guy sold him a bogus card.
TonyJer, it's time to eat that loss and buy another card.
http://www.newegg.com/Product/Product.as...4-011-_-Product
http://www.newegg.com/Product/Product.as...2-012-_-Product
|
|
TonyJer
Member
|
12. October 2010 @ 15:44 |
Link to this message
|
Originally posted by eebeejay:
Ease up on him. I've PM'ed with him on a few issues involving this. He says that his card he bought IS a VIA 6421, but shows up as a 3249. The guy he bought it from (off ebay) says it needs the drivers installed to be recognized as a 6421. Everything he tells me insinuates that he understands the flashing concept/procedure quite well. It's just that the card isn't doing what it's supposed to, which says to me that the flea-bay guy sold him a bogus card.
TonyJer, it's time to eat that loss and buy another card.
http://www.newegg.com/Product/Product.as...4-011-_-Product
http://www.newegg.com/Product/Product.as...2-012-_-Product
Readin Modking's responses makes one believe that one is writing in Urdu or Swahili. He just doesn't (can't!) read and certainly can't smell the coffee.
Thanks you Eebeejay for pointing out my knowledge of chipset properties etc. Quite simply I wanted to say to hell with the PCI-SATA card and use one of my internal SATA ports. My "chipset" is 82801IR and I've seen this drive listed as one that is compatible with xbox flashing etc. I plugged in as stated previously then got this message which I now know is related to Trojans, Firewall, and suspicion of the site where the JF was downloaded from.
I will google as I always do to find a workaround to the error message is it likely that use of the internal SATA will be error free (SATA O is being used so I used another one as stated).
Modkings age is now most likely to be in the 4-8 range with a similar IQ!! I would sincerely suggest additional literacy and numeracy lessons.
Many thanks again Eebeejay.
By the way I'm convinced that the card issue is related to Windows Vista as this is the second card I've tried with the same problem. Someone has even stated that a fresh reinstall of Vista followed by installation of the card would produce the 6421 properties required.
|
AfterDawn Addict
3 product reviews
|
12. October 2010 @ 16:23 |
Link to this message
|
I know its a long work-around, but you could always create a new partition on your hard drive and install XP, Ive never had any problems at all with xp picking up the drive. On some drive you need to not have the drivers installed, so i personally would say its the best way round this,
|
|
TonyJer
Member
|
12. October 2010 @ 17:55 |
Link to this message
|
Originally posted by miketrev:
I know its a long work-around, but you could always create a new partition on your hard drive and install XP, Ive never had any problems at all with xp picking up the drive. On some drive you need to not have the drivers installed, so i personally would say its the best way round this,
Thanks may try this but can I still try the internal SATA if I overcome this "Windows cannot access the specified device path or file.........?
|
AfterDawn Addict
|
12. October 2010 @ 18:02 |
Link to this message
|
Originally posted by TonyJer:
Modkings age is now most likely to be in the 4-8 range with a similar IQ!! I would sincerely suggest additional literacy and numeracy lessons.
That I can agree on.
|
|
TonyJer
Member
|
12. October 2010 @ 18:19 |
Link to this message
|
Originally posted by NDarkness:
Originally posted by TonyJer:
Modkings age is now most likely to be in the 4-8 range with a similar IQ!! I would sincerely suggest additional literacy and numeracy lessons.
That I can agree on.
Agree but can I use my internal SATA to flash??
|
|
coorva
Suspended due to non-functional email address
|
12. October 2010 @ 23:27 |
Link to this message
|
yes,you can use the onboard sata,,,and i would try to use XP,,vista has alot of issues with jungleflasher
microsoft after a ban wave |
|
TonyJer
Member
|
13. October 2010 @ 02:39 |
Link to this message
|
Originally posted by coorva:
yes,you can use the onboard sata,,,and i would try to use XP,,vista has alot of issues with jungleflasher
Many thanks
Will try Vista first then XP.
|
Member
|
13. October 2010 @ 22:52 |
Link to this message
|
Originally posted by TonyJer:
Originally posted by coorva:
yes,you can use the onboard sata,,,and i would try to use XP,,vista has alot of issues with jungleflasher
Many thanks
Will try Vista first then XP.
i actually bought a card off of amazon when i fist stated out, it states that it is a VIA VT6421A but i can not be to sure, it came with a mini driver cd, but i no longer have it.
anyway i i took a look at this picture on newegg from the link posted above, and it looks remarkably similar to mine, but it's not the exact same card. i have a picture i took with my dsi, just for comparisons sake, and you can view it here. i took them with my dsi, it's the closest thing i actually have to a digital camera, so sorry if the quality isn't the best :/ the reason i am posting about this, is that i was able to flash my drive in ms-dos, so you should give your card a wirl in that mode as well.
good luck!
--WW3
Custom Computer rebuild 2.80GHZ@6cores/8GBRAM|3DS | WII|360|PS3|
 |
|
Modking30
AfterDawn Addict
|
13. October 2010 @ 23:01 |
Link to this message
|
|
Boo hoo hoo. Then he needs to learn to stick to one thread
|
Senior Member
|
14. October 2010 @ 01:39 |
Link to this message
|
|
2 handles for this forum?
"All drives should be updated to Lite Touch + (LT+) firmware if playing on XBOX live. Samsung drives and pre-78/79 Hitachi drives do not utilize AP 2.5. All other drives are considered to be detectable by Microsoft (YMMV). Make sure all rips are ABGX verified, contain SSv2, and patched AP2.5 (where needed). XGD3 must currently be burned on new drive with PC Burner Max firmware for 100% rip. All modded consoles can be potentially unsafe for use on XBOX live."
This message has been edited since posting. Last time this message was edited on 14. October 2010 @ 01:39
|
|
Modking30
AfterDawn Addict
|
14. October 2010 @ 09:18 |
Link to this message
|
|
wow. Jpizzle likes to post my address at my work place.
|
AfterDawn Addict
|
14. October 2010 @ 14:35 |
Link to this message
|
Originally posted by Modking30:
wow. Jpizzle likes to post my address at my work place.
What happened to not being Jason Poth- the owner of pothsprojects, you sack of crap?
|
|
ddp
Moderator
|
14. October 2010 @ 15:12 |
Link to this message
|
|
NDarkness & modking, shut your mouths & help other people instead of fighting because if you want to fight, you'll loose against me so your choice.
|
|
Modking30
AfterDawn Addict
|
14. October 2010 @ 15:31 |
Link to this message
|
Originally posted by NDarkness:
Originally posted by Modking30:
wow. Jpizzle likes to post my address at my work place.
What happened to not being Jason Poth- the owner of pothsprojects, you sack of crap?
I'm not. I work with the guy. Time to close this thread too!
This message has been edited since posting. Last time this message was edited on 14. October 2010 @ 15:32
|
|
jpizzle
Senior Member
|
14. October 2010 @ 15:32 |
Link to this message
|
Originally posted by Modking30:
wow. Jpizzle likes to post my address at my work place.
WHERE did I post your address ??? Since when did GameOver9 become a moderator on AD? stating when it is time to close threads! Keep my name out your mouth BOY!
This message has been edited since posting. Last time this message was edited on 14. October 2010 @ 15:37
|
|
Advertisement
|
|
|
|
ddp
Moderator
|
14. October 2010 @ 15:38 |
Link to this message
|
|
closed as kids can't play nicely.
|
