Originally posted by whompus:

---

Before replacing you burner you might want to flash it with newer firmware. A070 is kinda old. All there firmware for that drive is kinda old same as the drive. There are a couple newer versions at aopen site for the drive though.

---

Originally posted by infulfx:

---

Originally posted by whompus:

---

Before replacing you burner you might want to flash it with newer firmware. A070 is kinda old. All there firmware for that drive is kinda old same as the drive. There are a couple newer versions at aopen site for the drive though.

---

Thanks for the suggestion. I update the firmware to the newest one which was still old. Tried to burn a different game and got the same error message. I verified the iso using abgx360 and they all pass. Guess I have to buy a new burner. Any suggestions on which one should i get?

---

Quote:

---

Before replacing you burner you might want to flash it with newer firmware.

---

Originally posted by dred05:

---

speed: 2,4 good
media: Verbatim DVD+DL good
burner: AOpen ?
software: IMGBurn ?

try CloneDVD for burning and see if it works.

Quote:

---

Before replacing you burner you might want to flash it with newer firmware.

---

good point.

---

Quote:

---

I 15:15:35 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 4x, 6x, 8x)

---

Originally posted by pa1215:

---

I have a liteon drive (newer) and updated to the recent firmware. I have been using ritek (maxell) discs and have been having the same problem. I have a hard time beleiving that more than one person having the exact same problem but with different drives or different discs is a coincidence. I have tested in every software possible. Imgburn, dvd decrypter,nero,clonedvd, and even xbox backup creator. I have also burned at every possible speed, and received an entire 2 spindles of coasters with the exception of 3 working discs. One of my backups almost loads when burned at 8x, but fails and gives me a disc dirty or damaged error. At 2.4x or 4x or 1x there are tiny lines in the dl disc that are about 1 inch apart that are about 1mm in width in a circular pattern around the entire disc approximately 5 of them. I assume these lines are why the slow speeds are not reading on my xbox360, or why the programs are failing out. (What are these lines caused by, anyone know? The look like literal blank partitions on the disc) Although I have had at least one disc on every speed after several tries burn to 100 percent. Now, one game I backed up burned fine at 8x didn't fail and plays fine on my 360. Another game I burned at 6x plays fine too. Whilst another game burned fine at 4x and plays fine on my 360. These are all completely different titles. But burning them is like russian roulette ( I never know which speed is going to work for each game) and I can't be having to guess what speed to burn them at every time I burn a different game title or I'll be wasting alot of money. I bought another dvd+r dl burner today and am going to try verbatim discs once I can find some locally. But something tells me I'll prolly burn a bunch more coasters again. Surely there is something specifically at fault here that we all have in common, hopefully someone will figure it out, cause these dl discs are expensive and hard to come by in my hometown. If anybody has any new suggestions please let me know. Also I set the layer break manually too, so that can't be the problem either. And just for kicks I bought my second spindle of discs at a completely different store. Sorry that I can't post my img burn log, i was having this problem several days ago and wiped my hdd so the log is no longer there. But mine is similar to both of the previous posted logs depending on what speed and what game I was attempting to burn.

---