I read through the JungleFlasher Tutorial on how to flash a sammy but what I don't understand is, at what part of the tut does the sammy get restored to Stock?
I have a samsung drive with 1.4 already flashed, and so i want to make sure the drive is restored to stock before I go ahead and flash to ixtreme 1.6
should just have to put your original firmware into the lower boxes on the firmware tool 32 page and then flash it as you did the first time. or, you could use iprep and flash it back to stock that way. just use the fsam then your serial number. just make sure you only have your original FW on the stick and not the hacked/modded fws or it will just flash that back onto it.
but you really dont have to flash it back to stock before you update it to 1.51 or 1.6.
Come talk with us on efnet at #elitemods !!! or just click ME
ALSO, DO NOT SEND ME MESSAGES ON LIVE REGARDING MODDING CONSOLES, OR HOW I PLAYED A CERTAIN GAME EARLY. I WILL NOT RESPOND. I WILL INSTEAD DELETE YOUR MESSAGE, AND BLOCK ALL COMMUNICATION FROM YOU. JUST SEND ME A PM ON HERE.
This message has been edited since posting. Last time this message was edited on 7. July 2009 @ 11:38
Come talk with us on efnet at #elitemods !!! or just click ME
ALSO, DO NOT SEND ME MESSAGES ON LIVE REGARDING MODDING CONSOLES, OR HOW I PLAYED A CERTAIN GAME EARLY. I WILL NOT RESPOND. I WILL INSTEAD DELETE YOUR MESSAGE, AND BLOCK ALL COMMUNICATION FROM YOU. JUST SEND ME A PM ON HERE.
Come talk with us on efnet at #elitemods !!! or just click ME
ALSO, DO NOT SEND ME MESSAGES ON LIVE REGARDING MODDING CONSOLES, OR HOW I PLAYED A CERTAIN GAME EARLY. I WILL NOT RESPOND. I WILL INSTEAD DELETE YOUR MESSAGE, AND BLOCK ALL COMMUNICATION FROM YOU. JUST SEND ME A PM ON HERE.
