Originally posted by leerage:

---

No, the drive is not bricked. As long as you have the dummy bin you are fine.

What is probably causing the freeze is the VIA driver. Try this:

1. Disable VIA card in Device Manager.
2. Go to C:\WINDOWS\System32\drivers and remove "viamraid.sys" or "vsmraid.sys".
3. Re-Enable VIA card in Device Manager.
4. Re-boot PC.

Try turning on the drive again, and then loading up JF. If it doesn't freeze, re-send the Lite-ON erase to the SAME IO port you were using.

---

Quote:

---

Your drive is blank it now needs to be flashed.
You will need to eject the tray if you have closed it see below.
You will need to use iprep to flash the firmware back.
ALL YOU NEED IS IN MY DOWNLOAD THREAD.

Making your new firmware.
open jungle flasher and.

1. select load source firmware
2. yes to load ixtreme
3. click manual spoofing
4. click load key.bin (select your key.bin)
5. click load inquiry.bin (select your inquiry.bin)
6. click ok
7. click save to file
8. save as litcfw.bin

Now save this to iprep usb drive folder Backup\1234567\12345
you may need to make the folder 1234567 and then inside that folder create the folder 12345 save the litcfw.bin in there.

opening tray follow pic below then.....
Once you can open the tray pull the tray out fully and push half way back in. Now, hook it up to the PC using
Connectivity Kit and Sata, power on and flash your new firmware.

Flashing your liteon in iprep.
Start iprep and do the following:

1. flit 1234567 12345
2. follow instructions (power cycle drive etc)
3. select W to write firmware
4. type when asked litcfw.bin
Thats it youre flashed.

Thankyou please leave some rep.

---

Originally posted by harvardja:

---

i forgot my SATA port number

how would i find that out

btw leerage i love you

---