afterdawn.com > forums > consoles > xbox 360 - modding & hacking > xbox 360 nand help
xbox 360 nand help
purity1
Newbie
10. June 2010 @ 14:47
Link to this message
ok this is what happened.
i got the console off eBay to jtag when i received the console booted fine. I double check the dashboard version and that was fine to be jtaged.
Installed the jtag wiring and the lpt wiring and dumped the NAND.
I ran degraded to check the CB version which again was correct for the jtag hack to work.
i extracted my KV.bin and Config.bin from one of my dumps i injected them into xbr and then remapped the bad blocks.
i flashed the NAND with the xbr.bin and waited 5 mins then booted the Xbox and was greeted by the jtaged dashboard.
i then removed the R6T3 resistor to stop me accidentaly updateing the console and looseing the jtag hack.
I then re-assembled the Xbox and powered on the box to be greeted by the E79 error, i reflashed the board and have continued to receive the E79 error.
i sent it of to a mod store where he told me that my NAND was un-readable and un-flahable and that my NAND would need to be rebuilt.
My Motherboard Revision is a Xenon
can some one help me to get it working again
This message has been edited since posting. Last time this message was edited on 10. June 2010 @ 14:47
Advertisement
AfterDawn Addict
3 product reviews
11. June 2010 @ 05:55
Link to this message
Have you got it back from the store? Have you tried to dump the NAND again yourself? I would recommend you double check your JTAG wiring, get a multimeter on the diodes to make sure they are working correctly.
To get instant assistance with Flashing / JTAG / Homebrew from experts for free!
click me (Im not one of the said experts BTW)
Make poverty history, cheaper drugs NOW!
purity1
Newbie
11. June 2010 @ 07:04
Link to this message
the store cant get it it read or wright, he said he couldent detect the flash controler and he tried on 10+ pc's
AfterDawn Addict
3 product reviews
11. June 2010 @ 07:49
Link to this message
Originally posted by purity1: the store cant get it it read or wright, he said he couldent detect the flash controler and he tried on 10+ pc's But you could? It might be that you or them have now burned the LTP points, has happened to me on one xbox.
To get instant assistance with Flashing / JTAG / Homebrew from experts for free!
click me (Im not one of the said experts BTW)
Make poverty history, cheaper drugs NOW!
purity1
Newbie
11. June 2010 @ 07:51
Link to this message
ok if we burned the ltp points i take it thier is no way to fix this
AfterDawn Addict
3 product reviews
11. June 2010 @ 07:53
Link to this message
Originally posted by purity1: ok if we burned the ltp points i take it thier is no way to fix this No, but that wouldn't cause the e79 error. You may have a valid NAND image on their ATM but are effected by another problem, did you check your diodes I JTAG wiring?
To get instant assistance with Flashing / JTAG / Homebrew from experts for free!
click me (Im not one of the said experts BTW)
Make poverty history, cheaper drugs NOW!
This message has been edited since posting. Last time this message was edited on 11. June 2010 @ 07:54
purity1
Newbie
11. June 2010 @ 07:59
Link to this message
the jtag wireing has been checked 10+ times i think something got screwed in the original wright but since the lpt points are trashed it lookes like we will never know
Advertisement
AfterDawn Addict
3 product reviews
11. June 2010 @ 08:02
Link to this message
Sorry couldn't be of more help, maybe someone else will add something which Ive missed.
To get instant assistance with Flashing / JTAG / Homebrew from experts for free!
click me (Im not one of the said experts BTW)
Make poverty history, cheaper drugs NOW!
afterdawn.com > forums > consoles > xbox 360 - modding & hacking > xbox 360 nand help