My WRT54G2 v1.0.01 and my wii V. 4.2U cant seem to reach an understanding through my XP PC. I have read this whole board and everything I could find on the net and actually tried every answer people have given to fix the problem and nothing.
I just got my Wii a couple of days ago and have been struggling with this since then. They are wired through a Nintendo lan connector and although the menu says that it tested the connection and was OK when I got to 24 connect to accept the terms it comes back with an error 220602.
Right now, after it OK'ed i told it to look for updates, it did and asked me if I wanted to used the shopping channel and 24connect , I said yes, it asked to accept the terms to connect and BAM! again the same error.
What am I doing wrong?!??!?!?
I even tried wireless and the same thing. I tried also with the Nintendo usb connector and nothing.
PLEASE, PRETTY PLEASE HELP
Oka, this is my router info:
firmware Version: 1.0.01 build 003,Mar. 26, 2008
Current Time: Mon,Jul 26 2010 07:48:01
MAC Address: (erased)
Router Name: WRT54G2
Host Name:
Domain Name: lan
Internet
Configuration Type
Login Type: Automatic Configuration - DHCP
IP Address: 10.0.0.2
Subnet Mask: 255.255.255.0
Default Gateway: 10.0.0.1
DNS 1: 10.0.0.1
DNS 2: 196.3.81.5
DNS 3: 200.88.127.22
MTU: 1500
Local Network
MAC Address: (erased)
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
DHCP Server: Enable
Start IP Address: 192.168.1.2
End IP Address: 192.168.1.4
Wireless
MAC Address: (erased)
Mode: Mixed 11/54Mbps
SSID:
i would flash your router with white russian or ddwrt. Only do it if you know what you are doing. By flashing it it puts custom software into your router. If you mess up you could destroy it, but it would fix your issues.
LOL, oka, you are a Wiigenius, me? not so much, lol.
I wouldn't know how to flash it, but with a tutorial or a guide, I'm capable of anything :-)
you say this might work and the worst case scenario I end up without a router?, that's a calculated risk I'm willing to take ($50 for a new router IF doesn't work...)
Originally posted by cee43ja1: it depends on which WRT54G2 you have. if you have a 1.5, you can't flash it. but even then, the G2 routers are very technical for flashing.
you're better off getting a WRT54GL and flashing it out of the box.
mine is V1.0
I think I should just get a new router or at least borrow one for testing... :-(
read, read, read! and when you're done, read! failure to do everything said in the instructions will lead to a bricked router.
that's what i did wrt54g2 v1
but before doing something drastic, I'm going to test another router, if it works, then mine is the problem; if not, is the settings, THEN I'll deal with dd-wrt
even if you got a new router i would personally flash it with custom software. It unlocks tons of potential in any router with custom software. Lets just say you have more available options to fix your wifi issues.
After you flash it you can access:
administrations tab > commands
then enter this code to reroute your connection directly to the wiis.
