|
I have a problem
|
|
|
kmj523
Junior Member
|
19. May 2012 @ 20:35 |
Link to this message
|
I have been using dvd fab rip movies dvd shrink to shrink them then im using imgburn to burn it and till now im having problems dvds are skipping and saying they are completed and won't be read on my dvd player and now im gettin this message I/O Error! Device: [2:0:0] TSSTcorp CDDVDW TS-H653N 0609 (E:) (Fibre) ScsiStatus: 0x02 Interpretation: Check Condition CDB: 28 00 00 14 1B E2 00 00 01 00 Interpretation Read (10) - sector:1317858 Sense area: 70 00 04 00 00 00 0A 00 00 00 3E 02 00 00 00 00 please help thank you SK Interpretation: Hardware Error ASC/ASCQ Interpretation: Timeout on logical Unit
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
|
20. May 2012 @ 05:01 |
Link to this message
|
|
So you have successfully completed this process before without trouble, correct?
Have you recently changed the brand of blank media you are using? What you're describing sounds like a media related problem.
|
|
Mez
AfterDawn Addict
|
30. May 2012 @ 20:34 |
Link to this message
|
I agree. FixVTS will solve minor skipping problems but nothing can make up for bad media. In borderline media you can have a run of bad disks then the problem goes away so you can hit a bad spot in the middle of a stack. I only use one brand. I don't even fool with #2.
|
|
kmj523
Junior Member
|
6. June 2012 @ 19:53 |
Link to this message
|
|
I have tried 7 movies even movies i already have to see if the new one i just burned is skipping and it is i used memorex is my burner going bad or what?
|
AfterDawn Addict
|
6. June 2012 @ 20:06 |
Link to this message
|
You should post an ImgBurn log of a bad session.
|
|
kmj523
Junior Member
|
6. June 2012 @ 21:12 |
Link to this message
|
|
It completes i dont get an error but like above on the very first post i verified the completed copy process but here
I/O Error! Device: [2:0:0] TSSTcorp CDDVDW TS-H653N 0609 (E:) (Fibre) ScsiStatus: 0x02 Interpretation: Check Condition CDB: 28 00 00 14 1B E2 00 00 01 00 Interpretation Read (10) - sector:1317858 Sense area: 70 00 04 00 00 00 0A 00 00 00 3E 02 00 00 00 00 please help thank you SK Interpretation: Hardware Error ASC/ASCQ Interpretation: Timeout on logical Unit
|
|
JST1946
Senior Member
|
6. June 2012 @ 21:52 |
Link to this message
|
|
Don't feel bad I had a bunch of coasters and I was using Memorex too.
20 Year U.S.Army Veteran.Vietnam 1969-1972 101st Abn.Div.
|
AfterDawn Addict
|
7. June 2012 @ 07:00 |
Link to this message
|
Yes, have you actually tried using another media brand?
Before you do (I missed this before, sorry) there is a firmware update available for your drive. Download it here.
HB02 6th May, 2009 sp42970.exe
(this may or may not fix your issues, but it's worth a shot)
This message has been edited since posting. Last time this message was edited on 7. June 2012 @ 07:01
|
|
Mez
AfterDawn Addict
|
7. June 2012 @ 08:27 |
Link to this message
|
Memorex is near the bottom of the barrel. It is 3rd tier there is not a 4th tier so there is nothing you can buy that is much worse. I ONLY use 1st tier because I don't like making coasters. I have learned 2nd tier don't age as well as making too many coasters. The only 1st tier you can buy in the states is Verbatim. There is another brand you can buy on the internet. Check out the blank media forum for more info. Try Verbatim and your burning issues will be fixed or at least fixable. Verbatim uses a different dye which allows for a slower burn. I burn at 2.5 X. I find that the most reliable for the widest range of players. We have several expensive but poor players in our house so the disks need to be perfect.
|
Senior Member
|
8. June 2012 @ 03:48 |
Link to this message
|
Originally posted by Mez:
Memorex is near the bottom of the barrel. It is 3rd tier there is not a 4th tier so there is nothing you can buy that is much worse. I ONLY use 1st tier because I don't like making coasters. I have learned 2nd tier don't age as well as making too many coasters. The only 1st tier you can buy in the states is Verbatim. There is another brand you can buy on the internet. Check out the blank media forum for more info. Try Verbatim and your burning issues will be fixed or at least fixable. Verbatim uses a different dye which allows for a slower burn. I burn at 2.5 X. I find that the most reliable for the widest range of players. We have several expensive but poor players in our house so the disks need to be perfect.
I will like to add:
-R's work better that +R's.
With +R even Verbatim very few times, you end up with coasters.
hope this help ;)
Live Free or Die.
The rule above all the rules is: Survive !
Capitalism: Funnel most of the $$$ to the already rich.
|
AfterDawn Addict
|
8. June 2012 @ 05:39 |
Link to this message
|
Originally posted by Mrguss:
I will like to add:
-R's work better that +R's.
With +R even Verbatim very few times, you end up with coasters.
hope this help ;)
There is a lot wrong with this statement.
|
|
Mez
AfterDawn Addict
|
8. June 2012 @ 07:58 |
Link to this message
|
Yes +Rs are supposed to be a bit better though in reality, because of the write once nature of what you do, the type is a mute point. I never even look at what type I am buying as long as the brand and price is right. When the price is right, I buy several hundred at a time. Then you are dealing with the same lot. I buy again before I go below 50. This way if I ever see a problem, I can compare with the last batch.
|
|
kmj523
Junior Member
|
8. June 2012 @ 13:56 |
Link to this message
|
|
so it isnt my burner i dont need to replace it?
|
|
JST1946
Senior Member
|
8. June 2012 @ 14:05 |
Link to this message
|
|
I would try a different brand of media just to make sure before I went out and bought a new one.I would also use a cleaning disc to make sure the laser isn't dirty. I have had intermittent problems and usually it was just bad media I was using.The error code you were getting usually has to do with your media from what I have been reading.
20 Year U.S.Army Veteran.Vietnam 1969-1972 101st Abn.Div.
|
|
Mez
AfterDawn Addict
|
8. June 2012 @ 17:36 |
Link to this message
|
|
|
Senior Member
|
18. June 2012 @ 21:19 |
Link to this message
|
Originally posted by Ripper:
Originally posted by Mrguss:
I will like to add:
-R's work better that +R's.
With +R even Verbatim very few times, you end up with coasters.
hope this help ;)
There is a lot wrong with this statement.
After I burn more that 20K Disc (All Brands, all formats, etc) in the last 10 years or so. And I end up preferring Verbatim AZO -R.
WHY?
b/c as the DVD Drive Burner got old, it reach the point that do not recognize [Burn] +R anymore, but it continues burning -R.
Also using -R, I end up with 1 or 2 coasters once in awhile: since this world is not perfect yet. (I never been see a bad batch of blank disc's media on any of the 25,50 or 100-Disc Spindle on the -R) but you see more coasters on the +R on any brand.
http://www.amazon.com/Verbatim-95102-Br...dvd+blank+media
Live Free or Die.
The rule above all the rules is: Survive !
Capitalism: Funnel most of the $$$ to the already rich.
This message has been edited since posting. Last time this message was edited on 18. June 2012 @ 21:33
|
|
Mez
AfterDawn Addict
|
19. June 2012 @ 21:42 |
Link to this message
|
|
Well it seems you even burn more than me. How do you keep count?
|
|
kmj523
Junior Member
|
19. June 2012 @ 23:18 |
Link to this message
|
so i transfered the img file to another computer tried to burn it and it wont even read on my player and even copied an old img file and it burnt just fine?
|
|
Mez
AfterDawn Addict
|
20. June 2012 @ 07:48 |
Link to this message
|
|
It was never the burner.
|
|
kmj523
Junior Member
|
21. June 2012 @ 19:07 |
Link to this message
|
|
so its not the burner or the disc then is it the copying process or shrinking?
|
|
Mez
AfterDawn Addict
|
21. June 2012 @ 22:36 |
Link to this message
|
Try defab -> files -> FixVTS -> Shrink -> burn/w imgburn at less than 4x on Verberum disks. That is what I do EVERY time I might burn a coaster every 300 disks.
|
|
Advertisement
|
|
|
Senior Member
|
22. June 2012 @ 02:55 |
Link to this message
|
Originally posted by kmj523:
so i transfered the img file to another computer tried to burn it and it wont even read on my player and even copied an old img file and it burnt just fine?
I think your original file is corrupted. (If you can watch the video file on the PC you first rip it with, but no any where else).
Tray to re-rip it with DVD-Fab once again on the last PC you use.
Hope this help.
Live Free or Die.
The rule above all the rules is: Survive !
Capitalism: Funnel most of the $$$ to the already rich.
This message has been edited since posting. Last time this message was edited on 22. June 2012 @ 03:02
|
