|
Dreambox 800hdpvr
|
|
Senior Member
|
29. August 2011 @ 20:20 |
Link to this message
|
|
its not what i asked. you follow the procedure i said hold the button and open the web browser and it clearly indicates the revision of your box. at least make an effort to do what i ask
|
|
Advertisement
|
|
|
|
Member
|
30. August 2011 @ 04:11 |
Link to this message
|
|
as per "shoftuk" same results,input ip, comes back with several messages about sites.
This message has been edited since posting. Last time this message was edited on 30. August 2011 @ 04:13
|
|
Hubabubas
Junior Member
|
30. August 2011 @ 13:59 |
Link to this message
|
|
piopat,
What other image can you use on the 800pvr?
|
Senior Member
|
30. August 2011 @ 17:17 |
Link to this message
|
there are a few i suppose the most popular would be dream elite phoenix /nabilo blackhole/dream elite blackhole /pli /gemini but i believe fintann mentioned you need to know the sim and bootloader version of the box and then get an image suitable for use on your box .
|
|
Hubabubas
Junior Member
|
30. August 2011 @ 17:35 |
Link to this message
|
|
as I have put in a tread previously, when I hold the button and powerup it shows boot 75 20091005, DreamMultimedia dhcp... (**stop ***
this is after i put the ip in the browser.that's about it
|
Senior Member
|
30. August 2011 @ 18:09 |
Link to this message
|
well fintann seems to know the image he recommended so he may be able to help you solve the issues your having but if your intending to try a different image try this one
http://www.dm800sim2.com/sim2/nabilosat/content/61/20091115/194.html
you say your box is sim 2.01 bootloader 75 (bl75)the image above is sim 2.01 bl75 so it will work with your box .
|
|
shoftuk
Junior Member
|
30. August 2011 @ 19:14 |
Link to this message
|
|
my sim is definatly a 2.01 and boot #69 20081129 at the moment its showing in the information enigma 2008.11.29 release 0390 is there anyway i can update as every time i try to scan a satallite it just crashes and gives a message saying software problem then reboots itself
|
|
Hubabubas
Junior Member
|
30. August 2011 @ 19:24 |
Link to this message
|
Originally posted by shoftuk:
my sim is definatly a 2.01 and boot #69 20081129 at the moment its showing in the information enigma 2008.11.29 release 0390 is there anyway i can update as every time i try to scan a satallite it just crashes and gives a message saying software problem then reboots itself
Try scanning one sat, euro/astra 28.2 and see what you get.
|
Senior Member
|
30. August 2011 @ 19:25 |
Link to this message
|
|
|
Hubabubas
Junior Member
|
30. August 2011 @ 19:31 |
Link to this message
|
|
piopat thanks
I will hold off,finn may come up a salution,i was on the phone to him a few nights back,
he's well clued in, unlike me and others.
|
Senior Member
|
31. August 2011 @ 16:23 |
Link to this message
|
huba when you get the ip on the screen of the dm800 followed by the * stop* now type the ip on the screen into your pc browser. you now get a pile of image information on your pc including the bootloader version. do not put an image on your machine without knowing this information first otherwise you will likely get a 'no ca found' issue which is another problem in itself. please supply the bootloader version so i can advise further
|
|
Hubabubas
Junior Member
|
31. August 2011 @ 18:44 |
Link to this message
|
Originally posted by piopat:
well fintann seems to know the image he recommended so he may be able to help you solve the issues your having but if your intending to try a different image try this one
http://www.dm800sim2.com/sim2/nabilosat/content/61/20091115/194.html
you say your box is sim 2.01 bootloader 75 (bl75)the image above is sim 2.01 bl75 so it will work with your box .
Thanks piopat, worked first time, now up and running if I could send you a few beers through the post it would be well worth it. thanks again, my hair turning back to normal.
|
|
Hubabubas
Junior Member
|
31. August 2011 @ 18:52 |
Link to this message
|
Originally posted by fintannl:
huba when you get the ip on the screen of the dm800 followed by the * stop* now type the ip on the screen into your pc browser. you now get a pile of image information on your pc including the bootloader version. do not put an image on your machine without knowing this information first otherwise you will likely get a 'no ca found' issue which is another problem in itself. please supply the bootloader version so i can advise further
finn thanks a lot, i know you put a lot of work into these problems that pop up from time to time, and you get frustrated when you try to explain to eegits like myself, and we dont get it right, but i think i can speak on beahlf of us dumb eegits, that we do appreciate all the hard work that you put into this forum, as we do with piopat mickah and everyone who puts the effort to help keep the units running, again many thanks.
|
Senior Member
|
31. August 2011 @ 18:57 |
Link to this message
|
|
good for you huba.
|
|
shoftuk
Junior Member
|
1. September 2011 @ 05:26 |
Link to this message
|
Originally posted by Hubabubas:
Originally posted by fintannl:
huba when you get the ip on the screen of the dm800 followed by the * stop* now type the ip on the screen into your pc browser. you now get a pile of image information on your pc including the bootloader version. do not put an image on your machine without knowing this information first otherwise you will likely get a 'no ca found' issue which is another problem in itself. please supply the bootloader version so i can advise further
finn thanks a lot, i know you put a lot of work into these problems that pop up from time to time, and you get frustrated when you try to explain to eegits like myself, and we dont get it right, but i think i can speak on beahlf of us dumb eegits, that we do appreciate all the hard work that you put into this forum, as we do with piopat mickah and everyone who puts the effort to help keep the units running, again many thanks.
i finaly clicked on that the dreambox must be left in the stop mode befor inputing the ip address into the browser snd i now can see my bootloader is deffo #69 it says it was built in 2008 so i was ripped off on ebay which i knew from the start as it was listed as only 3 months old
|
Senior Member
|
1. September 2011 @ 14:00 |
Link to this message
|
shofluk if your sim is 2.01 then you should be able to load bootloader 82 and dream elite image.this is done in the exact same way as above. get to the *stop* screen, enter ip on pc. On this screen you should see the option to flash firmware. flash the image first (do not reboot the system after this flash) then flash the bootloader. now reboot the dreambox and all should be good.
if your sim is not 2.01 then you will get an error message on the screen when you reboot the dreambox 'no ca found'. if you get this error you need a null modem cable to reflash the dreambox. you will then need the ss69 bootloader and ss69 image. flash the image first using 'dreamup 1.3.3.6'. i have supplied links for all these files which i have uploaded to rapidshare for you
https://rapidshare.com/files/913061955/DreamboxUK_v1.1_DM800.nfi
https://rapidshare.com/files/4128335479/sim201-ssl82.nfi
https://rapidshare.com/files/3998550332/DreamEliteBH_DM800_124_SSL69_TSv2.nfi
https://rapidshare.com/files/3208385964/secondstage-dm800-69.nfi
https://rapidshare.com/files/3208535971/DreamUP_1_3_3_6.exe
So file 1 is based on dream elite and is developed by www.dreamboxuk.com. File 2 is the bootloader for this image.
File 3 is a dream elite image for a machine with bootloader69. I've used this image and it works very well. File 4 is the bootloader program.
I would really like you to confirm how you know your machine is sim 2.01. Your can open up the dm800, just 4 screws, and take the sim out and check it (it looks the exact same as he sim card out of a mobile phone). I you are really not sure i advise simply loading file3 and rebooting your machine. If you are certain that it is sim 2.01 well try file 2 followed by file 1 then reboot.
If you get 'no ca found' you will need a null modem cable. hope you have one handy
|
Senior Member
|
1. September 2011 @ 15:04 |
Link to this message
|
Originally posted by Hubabubas:
Originally posted by piopat:
well fintann seems to know the image he recommended so he may be able to help you solve the issues your having but if your intending to try a different image try this one
http://www.dm800sim2.com/sim2/nabilosat/content/61/20091115/194.html
you say your box is sim 2.01 bootloader 75 (bl75)the image above is sim 2.01 bl75 so it will work with your box .
Thanks piopat, worked first time, now up and running if I could send you a few beers through the post it would be well worth it. thanks again, my hair turning back to normal.
your wellcome mate
|
Senior Member
|
1. September 2011 @ 15:53 |
Link to this message
|
|
dammit i wanted those beers :-)
|
Senior Member
|
1. September 2011 @ 16:28 |
Link to this message
|
how are you fintann mate i only wish i could share them with you mate ,but dont worry ill enjoy drinking your beer for you ha ha . talk soon.
|
Senior Member
|
1. September 2011 @ 18:04 |
Link to this message
|
|
:-)
|
|
shoftuk
Junior Member
|
1. September 2011 @ 19:11 |
Link to this message
|
hi finn i took your advice and opened my box up i had to remove the tuner to get the sim out but i can now confirm it is a dream 2.01 if i reflash with the dream elite file you suggested will my c/line still work sorry to be a pain but im new to these boxes i always had a eurovox in the past can i download these files from somwhere else rather than rapid share i registered with them but they wont let me download the files to my pc
This message has been edited since posting. Last time this message was edited on 1. September 2011 @ 19:50
|
Senior Member
|
2. September 2011 @ 02:16 |
Link to this message
|
ok, to access your cline you download flashfxp and go to /var/etc and open file cccam.cfg. copy the cline in her to a file on your pc ( you will need to copy this back into cccam.cfg after you do the reflash). what error are you getting on rapidshare. i can download these files with no issue
|
Member
|
2. September 2011 @ 03:30 |
Link to this message
|
Originally posted by fintannl:
dammit i wanted those beers :-)
ok guys i giveup, there's one in the audience for everybody.
[img][/img]
|
|
shoftuk
Junior Member
|
2. September 2011 @ 09:01 |
Link to this message
|
that rapid share is just complicated it lets me download them to what they call a user account but i cant download them to my pc or a flash drive about the c/line can i still use dcc with this image
|
|
Advertisement
|
|
|
|
lukeian5
Junior Member
|
2. September 2011 @ 17:35 |
Link to this message
|
shoft, I've just tried the first link fint gave you, no problems, just click the green download button, middle option m8.
|
