I may have bricked my s/t/a/r/v/i/e/w. I believe I have an a genuine box which just reads sta*vi*w on the left side. I think I tried to flash using the fv of starview the box.
I do get the green dash which is still (not moving) on the box and I also can download the fv almost upto 100% but in the end is says failed
Can someone help me fix this and advise the correct fv bc i am confused if s/v the box is the same as only s/v
Connect the box to the PC and make sure its off. Start the loader and choose the firmware, now, press Download on the loader, count to 4 and flick the switch on the back of the Starview, it should kick in and start the loading and flash the box, it may take one or two attempts for it to actually flash, so be patient. Once done, leave the box until it restarts itself, then just connect to the TV and scan the chans again
Havin a problem with my sv4 im base in tallaght their is power on the box but nothing cumin up at all & on front of the box either !!! Their is a red little light at the back of the box tat wud be it :(
