Originally posted by MICKAH:

---

dont why your being told to put an old carling file onto the box as you have to factory reset the box after flashing firmware onto each time to make sure the firmware is on properly, if you followed the above you should be connected, it has been up and down the last few days also and as this has worked for others its down to your set up, not the file itself, so I suggest you look at your cables, router etc and follow the above

---

Originally posted by bobbeeeee:

---

Originally posted by dave0763:

---

ANY 1 ELSE GETTING SKY 2 ,,DISCOVERY ,CHANNELS ECT,,

---

look no caps (i was wondering what that a-b-c light was flashing green)

discovery is on ,but keeps freezing every 2mins but thats ok as i also have a st st st stutter

---

Originally posted by jay2401:

---

Originally posted by MICKAH:

---

dont why your being told to put an old carling file onto the box as you have to factory reset the box after flashing firmware onto each time to make sure the firmware is on properly, if you followed the above you should be connected, it has been up and down the last few days also and as this has worked for others its down to your set up, not the file itself, so I suggest you look at your cables, router etc and follow the above

---

hi mickah i havent moved my box since it was last working so the connections should still be ok..... i just dont get it

---

Originally posted by andym1:

---

bit of help if poss i have do all the step by step as in the very first post on how to put new firmwear on the sv6 but when i get to number 5 before scan make sure box is on u stream menu options network it does not show up on my box????? am i doing something qwrong,

---

Originally posted by MICKAH:

---

Originally posted by jay2401:

---

Originally posted by MICKAH:

---

dont why your being told to put an old carling file onto the box as you have to factory reset the box after flashing firmware onto each time to make sure the firmware is on properly, if you followed the above you should be connected, it has been up and down the last few days also and as this has worked for others its down to your set up, not the file itself, so I suggest you look at your cables, router etc and follow the above

---

hi mickah i havent moved my box since it was last working so the connections should still be ok..... i just dont get it

---

if you havent moved it, then its not flashed or scanned correctly, flash the box using the latest firmware and re-scan as per the instructions

---

Originally posted by MICKAH:

---

wheres the file?

---

Originally posted by MICKAH:

---

hold of until its confirmed mate, the combo files are UAD, not UD unless thats a typo above

---

Originally posted by MICKAH:

---

is the file type UD or UAD?

---

Originally posted by g7rjo:

---

UDB

---

Originally posted by MICKAH:

---

Originally posted by g7rjo:

---

UDB

---

Aye, stay away from it until its confirmed, the file type for the combo is UAD file type, not the above, for fear of bricking your box, dont put this on until its been confirmed as a working release, the file is not on any site nor has it been reported on sites as being a fix,

---