Updating Digivox Usb with ire firmware

Advertise at AfterDawn.com

Link to us!

Private messages

Compose a private message

List of all updated threads

Threads without replies

Search messages

Sunday 8.2.2026 / 05:18

Search AfterDawn Forums:

afterdawn.com > forums > home theater > digital tv - uk & europe > updating digivox usb with ire firmware

Browse by topic

Forums

Start a new thread

Updating Digivox Usb with ire firmware

Jump to:

Posted

Message

poolfan81

Member

1. July 2009 @ 13:13

Link to this message

hi just checking i got the right way of loading the firmware.

DIGIVOX XL USB BOX ONLY

YOU CAN UPDATE THE BOX VIA NULL MODEM CABLE OR USB DEVICE

TO UPDATE WITH USB DEVICE

1 PLUG THE USB DEVICE IN WITH BOX SWITCHED OFF

2 TURN BOX ON GO TO MENU AND ON THE BOTTOM LAST SELECTION USB

3 CLICK OK ON USB YOU SHOULD SEE THE FILE YOU PUT ON THE USB DEVICE SHOWING ON SCREEN

4 HIGHLIGHT IT AND PRESS OK YOU WILL THEN GET THE POP UP OPTION TO CANCELL OR YES PICK YES

5 WHEN YOU SELECT THIS YOU WILL GET ANOTHER SCREEN WITH THE DOWNLOAD BAR ON IT

6 IT TAKES A FEW SECONDS FOR ANYTHING TO HAPPEN SO JUST LEAVE IT DO NOT PRESS ANYTHING ON REMOTE

7 DO NOT DISCONNECT FROM THE POWER EITHER WHILE IT IS UPDATING

8 AFTER THIS IS FINISHED THE BOX WILL REBOOT JUST LEAVE IT AND LET IT DO IT

9 AFTER YOU SEE THE MENU AGAIN GO TO INSTALLATION AND CHOOSE PROVIDER AND SCAN THERE ARE ONLY LETTERS HERE

10 AFTER IT HAS SCANNED FOR THE CHANNELS GO TO MENU SYSTEM INFO AND PRESS OK THEN 1004 ON KEY PAD TURN KEY ON

11 EXIT TO MAIN TV AND ALLOW THE BOX TO UPDATE

12 TO GET THE CHANNELS ON TO THE CATGORIES LIST PRESS THE RED BUTTON AND PUT THE BOX IN STANDBY FOR A SECOND

THEN TURN ON AGAIN WHEN YOU TURN BACK ON YOU WILL GET A BLANK SCREEN AND 4 - - - - ON THE BOX DISPLAY THIS IS

NORMAL SO DONT GET ALARMED JUST LEAVE IT THEN THE CHANNELS WILL COME ON

TO GET BOX TO UPDATE USING THE NULL MODEM CABLE

1. OPEN digivox USB downloader

2. BROWSE AND Open the API File.

3. Press ? Download Button ?

4. You will see ?Please Set top AC power [off] and [ON].POP UP ON SCREEN

WHEN YOU SEE THE ABOVE TRUN the rear power button OFF THEN ON and then Click OK

YOU WILL THEN SEE THE BAR GOING ACROSS THE SCREEN THIS DOES TAKE A LONG TIME SO THE USB IS MUCH BETTER

AFTER THIS HAS DOWNLOADED DO NOT TOUCH ANYTHING UNTIL THE BOX REBOOTS AND THIS TAKES ABOUT 1 MIN OR SO

THE BOX WILL DO THIS AUTOMATICALLY SO JUST LEAVE IT

Warning: This download program is only available in DIGIVOX XL USB model

[ + quote]

Start a new thread

afterdawn.com > forums > home theater > digital tv - uk & europe > updating digivox usb with ire firmware


		User name	Password

		Not registered yet? Register here. Lost your password? Click here.