|
|
|
audio video out of sync
|
|
|
catch0233
Newbie
|
5. November 2002 @ 19:10 |
Link to this message
|
|
I'm using Smartripper to rip the dvds, then Flaskmpeg to make the mpegs, but the video is always about 5 seconds ahead of the audio.
What am I doing wrong? Can I fix the problem after I've made the mpeg?
Can you put out anything but an avi with Virtualdub?
|
|
Advertisement
|
|
|
|
|
catch0233
Newbie
|
6. November 2002 @ 10:17 |
Link to this message
|
|
ok, I think I got the audio fixed in virualdub. What compression should I select to get the best picture and not have it come out to be a huge file? I wanna make a vcd. Still wanna know if I HAVE to save it as an avi.
|
|
kingram
Suspended permanently
|
12. November 2002 @ 03:59 |
Link to this message
|
|
I have had great success with the following way to rip and have had no problems.
SIMPLE DVD2DVDR DISK COPY
Now where do we begin? Oh yes I have to say this bit.......This guide is meant to be an informative step by step process on how to make DVD-R backups of DVD's that you already own (to be more accurate backups of movies that are too big to fit on a standard DVD-R). It is not for making pirated copies of your favorite movie you don't feel like paying for.
OK first of all the reason I spent time on this page is because I am sick and tired of being asked how to do it, as the majority of the tutorials online, although very good, are confusing. Most sites don't seem to realize that not everyone has a good basic knowledge of their machines or the programmers they are using, yet would still love to be able to backup their own DVD's, or at least be shown how to in a correct step by step fashion in order for them to LEARN something !
Well i've sat down and drawn up a method which I believe to be not only the fastest, but easiest way to backup a movie that will not fit on a standard sized 4.7 GB DVDR. Oops have I baffled you already? OK for those that know what i'm talking about skip this bit.... For those that don't there are 2 types of DVD movie format - DVD5 and DVD9. DVD5 is a single layer disc that can be copied very easily complete with everything else that's on the disc. Unfortunately that format is not really used any more, the majority are the DVD9 format which is a dual layer disc and is much larger in size than a 4.7GB DVD-R. What this guide intends to do is teach you how to first rip the main movie files from a DVD9 format movie, then screw around with them so they'll fit on a standard 4.7GB DVD-R (actually its 4.3GB but I wont go into the aspects of the bullshit marketing). Are you with me so far ? If yes great - if no do not bother wasting your time with the rest of this tutorial :)
This is a list of the software that is used in this tutorial:
· DVD Decrypter v3.1.2.0
· DVD2AVI v1.76
· TMPGEnc Plus v2.56.39.143
· ChapterXtractor v0.961
· Spruce DVDMaestro v2.9.2915a
· Gear Pro DVD 6.02 rc07
Operating System: Windows NT/2000/XP with NTFS (don't try to do DVD-R with Windows 9X)
DVD-R Blank Discs: I recommend either using NEO DVDR or Purple Top Bulk Paq. They are both fantastic discs and very cheap. You can buy from www.playstationmods.com/cdr.htm, prices are from as little as £0.50
PC Hardware: Well its obvious you need a fast system, and if you are messing with DVD-R you probably already have one. We used Athlon 1800+, 512 SDRAM, 120 GB 7200rp, IDE drive. Not spectacular but does the job nicely. Of course the higher spec you have the quicker you finish the job. Before I forget we use the Pioneer A04 DVD-R Burner with the new v1.31 Firmware.
First of all you need to find out if your movie is DVD5 or DVD9. To tell which size go into My computer and right click on your DVD drive and click properties. It should tell you how big the disk is. As long as its under 4.7 Gigs then it should be a DVD-5, and will allow you to use the simpler DVD-5 Method which we will not go into here as its too easy - just use DVD Decypter to create a complete image of the disc. If it's bigger than 4.7GB then we're in business and you are 6 easy steps away from successfully producing a high quality backup with complete chapter selection.
There are 6 easy parts to this tutorial. You may have seen other methods that look simpler - well to be honest we don't find them as good - or much slower with the same results. The quality sometimes isn't that good, encoding can HOURS and the format isn't 100% compatible with all DVD players (including Playstation 2 which many have great difficulty in getting to work correctly).
Part I: DVD Decrypter (Ripping The DVD to Hard Drive)
Part II:DVD2AVI (Ripping The Audio Track)
Part III: TMPGenc (Re-Encoding The Movie To a Smaller Size)
Part IV: Chapter Xtractor (Ripping The Chapter Selection Information)
Part V: Spruce DVD Maestro (Compiling The DVD Project)
Part VI: Gear Pro DVD (Burn To DVD-R)
KingRam
|
|
mart
Newbie
|
17. November 2002 @ 09:50 |
Link to this message
|
|
catch0233
can you point out how exactly to fix the audio/video sync problem? There seem to be lots of AVI's on the net with a sync problem.
|
Junior Member
|
25. November 2002 @ 04:56 |
Link to this message
|
|
To fix the audio sync problem, download Nandub, open the avi file, then in the Audio menu choose Direct Stream Copy. From the Video menu choose Direct Stream Copy. Then in the Audio menu choose the Audio Interleaving... option. In the box where it allows you to offset the audio by x miliseconds, type a number (this will depend on how far ahead the audio is - you'll have to experiment I'm afraid. However, you said that the audio is 5 seconds behind the video, in which case type -5000 in the box. Ok that box, then in the File menu choose Save As... Give the file a new name (you can't overwrite the original anyway ;) and click save. Wait for a minute or so for Nandub to resave the avi file, then when it's done: play the file to test it. If that doesn't work: repeat and try again.
|
|
DTR-GhosT
Newbie
|
21. December 2002 @ 17:30 |
Link to this message
|
Sup DOOD! I had the same problem, and was stuck..... I see all the forum replies, have u get another 3rd party program, DOH!! My problem, was, i was using the .VOB file, from the actual rip, not the Video file, that DVDtoAVI made, der...
Try this page's instructions, after getting the new program version, it rocks!!!
http://www.theonlybob.com/Divx%20Page.htm
|
|
Advertisement
|
|
|
|
DTR-GhosT
Newbie
|
21. December 2002 @ 17:30 |
Link to this message
|
Sup DOOD! I had the same problem, and was stuck..... I see all the forum replies, have u get another 3rd party program, DOH!! My problem, was, i was using the .VOB file, from the actual rip, not the Video file, that DVDtoAVI made, der...
Try this page's instructions, after getting the new program version, it rocks!!!
http://www.theonlybob.com/Divx%20Page.htm
|
|
