|
First i do want to thank anyone who can help me with this problem im very confused?
Ive been useing edonkey behind my siemens speedstream 2602 2 port router for a long time with no problems.
Then i start getting the lowid problem looked around and found ways to fix that, but now i can only connect to the overnet part and im getting very slow downloads.
earlier today i was getting 100k down and 50k up no problem now im getting like 4k down and 20 up.
I do not get lowid no more but i cannt connect to the edonkey servers at all.
I think i forwarded my ports right but still no speed.
I dont have a firewall but the one with xp witch i have turned off.
there are 3 dif ways to forward ports with my router this is a paste from the guide
Advanced Setup | Virtual Server
If you configure the SpeedStream 2 port DSL/Cable Router as a virtual server, remote users accessing services such as Web or FTP at your local site via public IP addresses can be automatically redirected to local servers configured with private IP address. In other words, depending on the requested service (TCP/UDP port number), the SpeedStream 2 port DSL/Cable Router redirects the external service request to the appropriate server.
Example:
ID Private IP Private Port Type Public Port
1 192.168.254.20 80 TCP 200
2 192.168.254.12 21 TCP 333
3 192.168.254.28 23 TCP 455
or
Advanced Setup | Special Application
Some applications require multiple connections, such as Internet gaming, video conferencing, Internet telephony and others. These applications cannot work when Network Address Translation (NAT) is enabled. If you need to run applications that require multiple connections,-specify the port normally associated with an application in the "Trigger Port" field,select the protocol type as TCP or UDP, then enter the public ports associated with the trigger port to open them for inbound traffic.
Note:The range of the Trigger Port is 0 to 65535.
Example:
ID TriggerPort TriggerType PublicPort Public type
1 28800 UDP 2300-2400, UDP
47624
2 28800 UDP 2300-2400, TCP
47624
3 6112 UDP 6112 UDP
Advanced Setup | Client Filtering
You can filter Internet access for local clients based on IP addresses, application types, (i.e., HTTP port), and time of day.
For example, this screen shows that clients in the address range 192.168.254.50-99 are permanently restricted from using FTP (Port 21), while clients in the address range 192.168.254.110-119 are blocked from browsing the Internet from Monday through Friday.
i went with the Advanced Setup | Special Application
option but im not sure what the trigger port should be and then the puplic port range should be i got it set like this
with the trigger at 4660tcp (because i was getting a weird message that to many peaple had 4662)then the puplic port at 4000-5000 tcp
then i got one with trigger at 5343udp and with puplic at 5000-6000udp
Is that right?
And if so way cant i cant to the edonkey servers but can get the overnet.
And what happened to all my speed?
Please help thanx
|
