|
After Burning there are swirls around the disk?
|
|
Junior Member
|
21. September 2004 @ 18:48 |
Link to this message
|
|
hey i have been using DVD shrink and DVD decrypter together to produce a DVD but when it finished burning it leaves a swirl midway through the disc and when you watch the actual movie all it does is skip and stops...I have been using RITEK dvds and in the last batch that i brought i had no problem but just for the last week i have had problems?? how do i prevent this? is it the burner? the dvd's? or the programs i dont know i am pretty new to all of this aswell!!! HELP!!!
TaNyA lOvEs TeRrY
|
|
Advertisement
|
|
|
|
Moderator
|
21. September 2004 @ 19:31 |
Link to this message
|
|
What make/model burner?
Do you have a link to the latest batch of Riteks that you bought?
My killer sig came courtesy of bb "El Jefe" mayo.
The Forum Rules You Agreed To! http://forums.afterdawn.com/thread_view.cfm/2487
"And there we saw the giants, and we were in our own sight as grasshoppers, and so we were in their sight" - Numbers 13:33 |
Junior Member
|
22. September 2004 @ 00:42 |
Link to this message
|
|
what do you mean do i have the link to the latest batch i brought???
i have a lite on burner!!
TaNyA lOvEs TeRrY
|
Moderator
|
22. September 2004 @ 06:58 |
Link to this message
|
|
A link to the specific media you bought at the site you bought them from.
Now we know it's a Lite-On but what model is it?
My killer sig came courtesy of bb "El Jefe" mayo.
The Forum Rules You Agreed To! http://forums.afterdawn.com/thread_view.cfm/2487
"And there we saw the giants, and we were in our own sight as grasshoppers, and so we were in their sight" - Numbers 13:33
|
|
ddlooping
Senior Member
|
22. September 2004 @ 07:09 |
Link to this message
|
|
Hi. :)
tanya, at what speed was the disc burned?
If 4x or above, you might want to try and lower it to 2x.
|
Junior Member
|
22. September 2004 @ 15:20 |
Link to this message
|
|
yeah it is 4x that is wat i normally put it on...but last month when i had a different lot of dvd cd's it worked fine with 4x...??? is it just the cds or you want me to go a lower speed?
TaNyA lOvEs TeRrY
|
Junior Member
|
22. September 2004 @ 15:23 |
Link to this message
|
|
it is a Lite-On DVDRW LDW-851S
TaNyA lOvEs TeRrY
|
Junior Member
|
22. September 2004 @ 15:25 |
Link to this message
|
|
sorry i forgot to add in the other one that i posted that i didnt buy them from a site i got them from a market in laverton which is in VIC
TaNyA lOvEs TeRrY
|
|
ddlooping
Senior Member
|
22. September 2004 @ 16:35 |
Link to this message
|
|
Well, if you still have some of these DVDs left and want to use them, try at a lower speed.
If not, buy better media and you should be able to stick to 4x. ;)
|
Junior Member
|
22. September 2004 @ 16:38 |
Link to this message
|
|
what media would you suggest?? i will try at 2x after not now because i am on the internet. i only have 5 of those discs left anyway so it dont really matter but i will give it a shot and see if it works if it does i will stick to them if not i will change. they are pretty cheap to they only cost $45 for 50 at the market so they are good...do you know anything about DVDINFOpro??? someone on this forum said that you can check if your disc has any errors on it
TaNyA lOvEs TeRrY
|
|
ddlooping
Senior Member
|
22. September 2004 @ 16:47 |
Link to this message
|
|
You could try grade "A" Ritek or Verbatim branded discs.
You'd probably be better off buying them online though.
|
Junior Member
|
22. September 2004 @ 17:01 |
Link to this message
|
|
nah im not really interested in buying cds off the net besides im only 17...what is grade a ritek
TaNyA lOvEs TeRrY
|
|
Adder01
Member
|
22. September 2004 @ 17:06 |
Link to this message
|
|
Hey Tanya1987,
Fellow Aussie here. Look for Shintaro 4x disks, I've been through quite a few of those and only made one coaster. You can get them for about AU$1 per disk. These should burn at 4x with no probs. I've heard bad things about the 2x. Haven't tried the 8x.
The problem with cheaper disks is that they may not burn properly at higher speeds (hence previous comments to burn at 2x) and they may not work in your stand alone DVD player.
Adder.
|
Junior Member
|
22. September 2004 @ 17:10 |
Link to this message
|
|
yeah how much are they for a pack of 50 or 25? r you from vic?
TaNyA lOvEs TeRrY
|
|
Adder01
Member
|
22. September 2004 @ 17:15 |
Link to this message
|
|
Yeah I'm in Vic, Ringwood.
HiFi Supermarket have 50 packs for $49.
I know you can get cheaper, but I've found these the best in terms of "cheaper" but with quality.
|
Junior Member
|
22. September 2004 @ 17:18 |
Link to this message
|
|
what burner you got?? i got a liteon does it depend on the burner aswell..cause the first time i brought a pack of dvds i brought the wrong ones and it wouldnt work
TaNyA lOvEs TeRrY
|
|
Adder01
Member
|
22. September 2004 @ 17:28 |
Link to this message
|
|
I have a Pioneer.
Yes it does depend on your burner somewhat, but if the disks are better quality, then they will work better in all burners.
You bought the wrong ones? What did you buy?
The LiteOns have lots of firmware upgrades. These tend to fix a lot of compatibility problems, so if you are feeling adventurous upgrade the firmware. :)
|
Junior Member
|
22. September 2004 @ 19:34 |
Link to this message
|
|
Princo ones they wouldnt work you copy them and when you put them in the dvd player even the computer they go blank and nothing comes up!! umm what are firmwares or whatever they are called? i have never heard of them??
TaNyA lOvEs TeRrY
|
Junior Member
|
22. September 2004 @ 19:38 |
Link to this message
|
|
i have another problem now!! i am using dvd shink.. i put the disc in its called Neon Genesis: Evangalion death and rebirth when i go to copy it to my computer it comes up with a sign saying
dvd shink encountered an error and cannot continue
Failed to read fil D:\
Data error (cyclic redundancy check)
what is that?
TaNyA lOvEs TeRrY
|
|
Doofy
Member
|
22. September 2004 @ 19:50 |
Link to this message
|
|
i think cyclic redundancy check usually means a dirty or scratched disc, you could try clenaing the disc
Burn rubber that doesn't mean warp speed
|
Junior Member
|
22. September 2004 @ 20:00 |
Link to this message
|
|
thanks...do you think i could use those princo cds? or nah they arent good? i dont really know much thanks for all your help tho
TaNyA lOvEs TeRrY
|
Junior Member
|
22. September 2004 @ 20:46 |
Link to this message
|
it still wont let me i cleaned the disc and its fine but it says the same thing. i then tried DVD Shrink but its too big for the disc anyway.. now wat?
TaNyA lOvEs TeRrY
|
|
Adder01
Member
|
22. September 2004 @ 21:05 |
Link to this message
|
Princo are fairly crap.
Firmware...hhmm...if you don't know what it is you probably shouldn't try to change it. Firmware is the software thats in your DVD drive. If you tried to upgrade this and messed it up you could ruin your drive. Unless you know someone who can do this for you its probably best to leave it as it is. BUT, if you want to do it then go to the LiteOn webpage and they will tell you how to do it.
DVD Shrink says its too big? You try to set the compression to Custom and lower the percentage?
Doofy is correct...CRC error is a dirty disc. If it still doesn't work, then try using DVD Decrypter, it can usually read what DVD Shrink can't.
For help with DVD Decrypter check out the guides.
Adder.
|
Junior Member
|
22. September 2004 @ 21:08 |
Link to this message
|
hey i tried dvd decypter aswell i meant to say before if i do it on DVD Decrypter then it will be too big to burn but it came up with some error on there aswell!!
TaNyA lOvEs TeRrY
|
|
Advertisement
|
|
|
Junior Member
|
22. September 2004 @ 21:17 |
Link to this message
|
|
i also tried burning it with dvd decypter despite the error that it had but it said it was too big anyway...
TaNyA lOvEs TeRrY
|
