|
Shellshock: Nam' 67 Help
|
|
|
Ashman1
Member
|
22. September 2004 @ 16:29 |
Link to this message
|
|
Has anyone been able to back up this game? I tried backing it up using DVD Decryptor and Ritek media and burned 1x and can't get it to load up. I have backed up over 50 games, so I pretty much know what I am doing. When I insert the back up (after using SMD), my PS2 starts making ticking noises and nothing happens. I though it might be my laser, but all of my other back ups work great. Please help; I have already wasted two blank discs (thinking the first back up was bad). My signature below states what I am using.
Thanks
Windows Xp
Sony?s Internal DVD±RW Drive DRU-530A
PS2 v5 Flip Top with SMD 2.0
Media: Ritek DVD-R G04 4x
DVD Decryptor, Nero & Alcohol 120%
CD/DVD Generator, ISO Buster
CD & DVD Loader
|
|
Advertisement
|
 |
|
|
|
MultiCopr
Member
|
22. September 2004 @ 20:08 |
Link to this message
|
|
Same here...I cant get shellshock, Star wars battlefront or burnout 3 to work and those are all 3 NEW games. Have they changed something on the disks? I havent tried swapmagic yet, I have only copied them to my hdadvance hard drive. All my other games on there work so I dont know whats different about these games. Well dangit i just noticed my sig wont work....blah
This message has been edited since posting. Last time this message was edited on 22. September 2004 @ 20:10
|
|
toyfigure
Suspended due to non-functional email address
|
23. September 2004 @ 06:10 |
Link to this message
|
I was able to backup Star wars Battlefront and Burnt Out 3 with no problems. Used DVD Decryptor & Nero with generic DVD-R media.
|
|
MultiCopr
Member
|
23. September 2004 @ 09:10 |
Link to this message
|
|
ARe you using swap magic dvd disk or hdadvance/hdloader?
|
|
cdub998
Junior Member
|
23. September 2004 @ 10:02 |
Link to this message
|
|
Hd loader on burnout 3 you have to enable one of the compatibility modes for it to work. Use select to access them.
|
|
MultiCopr
Member
|
23. September 2004 @ 10:08 |
Link to this message
|
|
Is that like the 5v3 thing with true crime? How do I go about doing the compatibility thing on my hdadvance?
|
|
Djlai78
Junior Member
|
23. September 2004 @ 12:07 |
Link to this message
|
|
This game sucks anyways. I played it for 5 minutes and didnt think it was worth backing up.
|
|
Kiddo15
Suspended due to non-functional email address
|
23. September 2004 @ 12:58 |
Link to this message
|
What'z up, all. I've been able to backup Shellshock and Burnout 3 using DVD Decrypter & Nero with TDK disks, I don't have any probs.
DVD Decrypter & NERO
Swap Magic w/Slide Card
v7 PS2
|
|
MultiCopr
Member
|
23. September 2004 @ 13:30 |
Link to this message
|
|
Hmmmm I guess I willjusthave to use the swap disk for these games. Thats cool though.
|
|
cdub998
Junior Member
|
24. September 2004 @ 07:42 |
Link to this message
|
|
You are supposed to hit select in the hdadvance to select compatibility mode. I use winhiip on my pc and do it that way. My burnout 3 works great.
|
|
MultiCopr
Member
|
24. September 2004 @ 12:14 |
Link to this message
|
|
OH ok I will try that then.....lol
|
|
MultiCopr
Member
|
24. September 2004 @ 19:00 |
Link to this message
|
|
Whats the difference in the compatibility modes when you hit select on the hdadvance? Which one does what?
|
|
scorsese
Newbie
|
26. September 2004 @ 16:59 |
Link to this message
|
Hi all,
I was able to Shellshock Nam '67 working.
To get this to boot up you will need ISObuster, CD/DVD Gen, and something to build ISO files. I personally use MS-DOS because I already have that on my computer and it is really easy and I don't need to get antoher program. Also you will obviously need DVD Decrypter or RecordNow Max or a similar program to burn the game.
For this guide I will be speaking of RecordNow Max beacuse that is what I used.
First I created a .GI file using RecordNow and saved it to my hard drive.
Then I used ISObuster to extract the ISO I extracted the files to a folder on my desktop titled shellshock.
Open up CD/DVD Gen and when the New Projecy window opens click DVD-Rom master disc then click OK.
Then I placed each file from that folder into the CD/DVD generator in the EXACT order they appeared in ISObuster.
Click on Volume in CD/DVD Gen
Where it says Disc Name type SLUS 20828
This part is important, you should have a file that you placed in CD/DVD gen that is either titled SLUS-208.28 or something similar. Whatever that file is you need to type that in under disc name WITHOUT the ( . ) I have the NTSC version, I believe the PAL version is SLES 208.28, but don't hold that against me if that is incorrect.
Hit record
It will then ask where to save to
Type shell and OK
You will probably recieve 2 error messages hit OK and disregard them both.
When you get to the next window hit file then export image.
Type in shell for the file name and save it to C:
do not put it in it's own folder or on the desktop create it on C:. It is easier to do this for future use.
It will then create the image.
Once it has completed you should have three files
shell 000 shell 001 and shell 002
at this point click on the windows start button and click run
type cmd and hit enter
The MS-DOS screen should appear
type cd c:\
you can copy and paste it if you like
that should bring you to
C:\>
at this point either type or copy and paste
copy /b shell.000 + shell.001 + shell.002 shell.iso
please note thAt you can only paste this into MS-DOS if you named your files are shell 000 shell 001 etc.
if they are named something else type that in place of shell.
hit enter
at this point you should see
shell.000
after a few minutes
shell.000
shell.001
then after a few more
shell.000
shell.001
shell.002
then it will say after completion
1 file copied
At this point open up whatever buring program you use.
I used RecordNow Max.
Burn the single ISO files that was created onto DVD
boot it up.
I have a flitop V10 and use SM V 2
No other Dvd loaders or swaps are needed.
It should load up almost as quick as there original and play flawlessly with no skips.
Also I use Memorex DVD - R
Hope this helps but after I burnt thre coasters of this game myself I tried this method and after it worked I just assumed other were in the same coaster burning routine. So if anyone has any problems or questions please post them here. I work during the day so I may not be able to get back to you til the evening.
Good Luck and hope this helps.
Scorsese
V10 Ps2 Fliptop
RecordNow Max
SM V 2.0
Memorex -R's @ 2 x
|
Senior Member
|
26. September 2004 @ 17:05 |
Link to this message
|
|
why go thru all of that. i have a v7 and shellshock nam works great. using swapmagic dvd
|
|
shola
Suspended due to non-functional email address
|
26. September 2004 @ 17:34 |
Link to this message
|
|
Yea all i did was burn it and use my swap magic disc no dvd loader no mod and it works fine i have a v10 ps2 with swap magic and hdadvance 120gb hd i put it on mode 3 so it works fine for me
Shola Johnson
|
|
Smorgan77
Junior Member
|
18. November 2004 @ 20:21 |
Link to this message
|
|
Awesome!!! the above described fix DOES work for LOTR - third age, and that was after I had mounted it from the alcohol-image download, decrypted to ISO from virtual drive. This is a GREAT FIX for these newer game issues.
Thanks to scorsece and Andrew!!!!
|
|
Advertisement
|
|
|
|
Smorgan77
Junior Member
|
19. November 2004 @ 14:04 |
Link to this message
|
|
I am using the above-described method for Killzone, and ran it through, and the ISO I came out with is the exact file size as the original ISO before the DVDGen/etc. Is that right, or is it just a waste of time with this game?
|
