|
|
|
Brand new burning woes
|
|
|
SjRick
Junior Member
|
28. September 2004 @ 11:12 |
Link to this message
|
|
I just installed a brand new XP and loaded nero 6 and dvd shrink and then started to burn my first dvd,, boom burning error,,, i run a P4 3.0 512 ram. Nvidia card, keep in mind this system was just rewiped and nothing was loaded prior to the nero and DVD Shrink,, heres the error i got,,
=====================================================
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 11:18:06 PM
Nero version: 6.3.1.10 (Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4081B>Version: A100 - HA 1 TA 0 - 6.3.1.10
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVDRAM GSA-4081B>Version: A100 - HA 1 TA 0 - 6.3.1.10
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800BB-00CAA1 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY CD-RW CRX220E1 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B atapi Port 1 ID 0 DMA: On
DiskPeripheral : ST380021A atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SONY CD-RW CRX220E1 E: CDRom0
HL-DT-ST DVDRAM GSA-4081 F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 767MB (785952kB)
Free physical memory: 429MB (439384kB)
Memory in use : 44 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
21.9.2004
===== Disc-Copy over image - 1st step : Copy to image ...
1:02:53 PM #1 Text 0 File Reader.cpp, Line 118
Reader running
1:02:53 PM #2 Phase 48 File dlgbrnst.cpp, Line 1841
Analyzing disc
1:02:53 PM #3 Text 0 File Writer.cpp, Line 124
Writer Image Recorder running
1:02:53 PM #4 CDCOPY -1 File CDCopy.cpp, Line 1896
The CD is copyrighted
1:02:57 PM #5 Text 0 File CDCopy.cpp, Line 2116
_Index0_ _______Index1_______ PostPause ___LastBlockOfTrack_
Track 1: 0 0 ( 0:02.00) 19012 19011 ( 4:15.36)
Track 2: 19012 19012 ( 4:15.37) 34772 34771 ( 7:45.46)
Track 3: 34772 34772 ( 7:45.47) 46445 46444 ( 10:21.19)
Track 4: 46445 46445 ( 10:21.20) 60542 60541 ( 13:29.16)
Track 5: 60542 60542 ( 13:29.17) 73440 73439 ( 16:21.14)
Track 6: 73440 73440 ( 16:21.15) 91685 91684 ( 20:24.34)
Track 7: 91685 91685 ( 20:24.35) 105372 105371 ( 23:26.71)
Track 8: 105372 105372 ( 23:26.72) 120185 120184 ( 26:44.34)
Track 9: 120185 120185 ( 26:44.35) 135677 135676 ( 30:11.01)
Track 10: 135677 135677 ( 30:11.02) 153009 153008 ( 34:02.08)
1:02:57 PM #6 Text 0 File CDCopy.cpp, Line 840
Copy options: copy on-the-fly: ON
read ISRC/MCN: OFF
use jitter correction: OFF
data options
ignore read error: ON write defekt blocks OFF
read raw data: OFF read r-w subchannel data: OFF
audio options
ignore read error: ON
read indexes: OFF read r-w subchannel data: OFF
source disc does not look like CD Extra
01. 0 - 19012 = 19012, audio (TRM_AUDIO_NOPRE, block size 2352)
02. 19012 - 34772 = 15760, audio (TRM_AUDIO_NOPRE, block size 2352)
03. 34772 - 46445 = 11673, audio (TRM_AUDIO_NOPRE, block size 2352)
04. 46445 - 60542 = 14097, audio (TRM_AUDIO_NOPRE, block size 2352)
05. 60542 - 73440 = 12898, audio (TRM_AUDIO_NOPRE, block size 2352)
06. 73440 - 91685 = 18245, audio (TRM_AUDIO_NOPRE, block size 2352)
07. 91685 - 105372 = 13687, audio (TRM_AUDIO_NOPRE, block size 2352)
08. 105372 - 120185 = 14813, audio (TRM_AUDIO_NOPRE, block size 2352)
09. 120185 - 135677 = 15492, audio (TRM_AUDIO_NOPRE, block size 2352)
10. 135677 - 153009 = 17332, audio (TRM_AUDIO_NOPRE, block size 2352)
1:03:42 PM #7 Text 0 File Burncd.cpp, Line 3200
Turn on Disc-at-once, using CD-R/RW media
1:03:42 PM #8 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2147483646 (477218:37.21)
Last address to be written: 153008 ( 34:02.08)
1:03:42 PM #9 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE
1:03:42 PM #10 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?
1:03:42 PM #11 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1:03:42 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_AUDIO_NOPRE (1 - Audio)
2 indices, index0 (150) not provided
original disc pos #0 + 19012 (19012) = #19012/4:13.37
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 19012 blocks [ Image Recorder ]
1: TRM_AUDIO_NOPRE (2 - Audio)
2 indices, index0 (0) provided
original disc pos #19012 + 15760 (15760) = #34772/7:43.47
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 15760 blocks [ Image Recorder ]
2: TRM_AUDIO_NOPRE (3 - Audio)
2 indices, index0 (0) provided
original disc pos #34772 + 11673 (11673) = #46445/10:19.20
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 11673 blocks [ Image Recorder ]
3: TRM_AUDIO_NOPRE (4 - Audio)
2 indices, index0 (0) provided
original disc pos #46445 + 14097 (14097) = #60542/13:27.17
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 14097 blocks [ Image Recorder ]
4: TRM_AUDIO_NOPRE (5 - Audio)
2 indices, index0 (0) provided
original disc pos #60542 + 12898 (12898) = #73440/16:19.15
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 12898 blocks [ Image Recorder ]
5: TRM_AUDIO_NOPRE (6 - Audio)
2 indices, index0 (0) provided
original disc pos #73440 + 18245 (18245) = #91685/20:22.35
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 18245 blocks [ Image Recorder ]
6: TRM_AUDIO_NOPRE (7 - Audio)
2 indices, index0 (0) provided
original disc pos #91685 + 13687 (13687) = #105372/23:24.72
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 13687 blocks [ Image Recorder ]
7: TRM_AUDIO_NOPRE (8 - Audio)
2 indices, index0 (0) provided
original disc pos #105372 + 14813 (14813) = #120185/26:42.35
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 14813 blocks [ Image Recorder ]
8: TRM_AUDIO_NOPRE (9 - Audio)
2 indices, index0 (0) provided
original disc pos #120185 + 15492 (15492) = #135677/30:9.2
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 15492 blocks [ Image Recorder ]
9: TRM_AUDIO_NOPRE (10 - Audio)
2 indices, index0 (0) provided
original disc pos #135677 + 17332 (17332) = #153009/34:0.9
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 17332 blocks [ Image Recorder ]
--------------------------------------------------------------
1:03:42 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 10:
1: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 0 352800 45069024, ISRC ""
2: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 45069024 45069024 82136544, ISRC ""
3: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 82136544 82136544 109591440, ISRC ""
4: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 109591440 109591440 142747584, ISRC ""
5: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 142747584 142747584 173083680, ISRC ""
6: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 173083680 173083680 215995920, ISRC ""
7: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 215995920 215995920 248187744, ISRC ""
8: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 248187744 248187744 283027920, ISRC ""
9: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 283027920 283027920 319465104, ISRC ""
10: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 319465104 319465104 360229968, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x01
-150 | 1 | 0 | 0x00 | 0x01
0 | 1 | 1 | 0x00 | 0x01
19012 | 2 | 0 | 0x00 | 0x01
19012 | 2 | 1 | 0x00 | 0x01
34772 | 3 | 0 | 0x00 | 0x01
34772 | 3 | 1 | 0x00 | 0x01
46445 | 4 | 0 | 0x00 | 0x01
46445 | 4 | 1 | 0x00 | 0x01
60542 | 5 | 0 | 0x00 | 0x01
60542 | 5 | 1 | 0x00 | 0x01
73440 | 6 | 0 | 0x00 | 0x01
73440 | 6 | 1 | 0x00 | 0x01
91685 | 7 | 0 | 0x00 | 0x01
91685 | 7 | 1 | 0x00 | 0x01
105372 | 8 | 0 | 0x00 | 0x01
105372 | 8 | 1 | 0x00 | 0x01
120185 | 9 | 0 | 0x00 | 0x01
120185 | 9 | 1 | 0x00 | 0x01
135677 | 10 | 0 | 0x00 | 0x01
135677 | 10 | 1 | 0x00 | 0x01
153009 | lead-out | 1 | 0x00 | 0x01
1:03:42 PM #14 Phase 120 File dlgbrnst.cpp, Line 1841
Creating the image for burning
1:03:42 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0
1:03:42 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #19012): write at #19012
1:03:42 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 2 (relocatable, no disc pos, no patch infos, orig at #34772): write at #34772
1:03:42 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 3 (relocatable, no disc pos, no patch infos, orig at #46445): write at #46445
1:03:42 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 4 (relocatable, no disc pos, no patch infos, orig at #60542): write at #60542
1:03:42 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 5 (relocatable, no disc pos, no patch infos, orig at #73440): write at #73440
1:03:42 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 6 (relocatable, no disc pos, no patch infos, orig at #91685): write at #91685
1:03:42 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 7 (relocatable, no disc pos, no patch infos, orig at #105372): write at #105372
1:03:42 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 8 (relocatable, no disc pos, no patch infos, orig at #120185): write at #120185
1:03:42 PM #24 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 9 (relocatable, no disc pos, no patch infos, orig at #135677): write at #135677
1:06:02 PM #25 Text 0 File WriterStatus.cpp, Line 115
< Image Recorder > start writing Lead-Out at LBA 153009 (255B1h), lenght 0 blocks
1:06:02 PM #26 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
1:06:02 PM #27 Phase 121 File dlgbrnst.cpp, Line 1841
Creating Image completed successfully
===== Disc-Copy over image - 2nd step : Burn the image ...
1:06:08 PM #1 Phase 90 File dlgbrnst.cpp, Line 1841
Buffer Underrun Protection activated
1:06:08 PM #2 Text 0 File Reader.cpp, Line 118
Reader running
1:06:08 PM #3 Text 0 File Writer.cpp, Line 124
Writer HL-DT-ST DVDRAM GSA-4081B running
1:06:08 PM #4 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = '
TocType = 0x00
Finalized = 1
First/Last Track = 1 / 10
1: ISRC = '
Blocksize = 2352
TrackMode = 'TRM_AUDIO_NOPRE'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 352800, NextTrackFilePos = 45069024
2: ISRC = '
Blocksize = 2352
TrackMode = 'TRM_AUDIO_NOPRE'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 45069024, Index1FilePos = 45069024, NextTrackFilePos = 82136544
3: ISRC = '
Blocksize = 2352
TrackMode = 'TRM_AUDIO_NOPRE'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 82136544, Index1FilePos = 82136544, NextTrackFilePos = 109591440
4: ISRC = '
Blocksize = 2352
TrackMode = 'TRM_AUDIO_NOPRE'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 109591440, Index1FilePos = 109591440, NextTrackFilePos = 142747584
5: ISRC = '
Blocksize = 2352
TrackMode = 'TRM_AUDIO_NOPRE'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 142747584, Index1FilePos = 142747584, NextTrackFilePos = 173083680
6: ISRC = '
Blocksize = 2352
TrackMode = 'TRM_AUDIO_NOPRE'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 173083680, Index1FilePos = 173083680, NextTrackFilePos = 215995920
7: ISRC = '
Blocksize = 2352
TrackMode = 'TRM_AUDIO_NOPRE'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 215995920, Index1FilePos = 215995920, NextTrackFilePos = 248187744
8: ISRC = '
Blocksize = 2352
TrackMode = 'TRM_AUDIO_NOPRE'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 248187744, Index1FilePos = 248187744, NextTrackFilePos = 283027920
9: ISRC = '
Blocksize = 2352
TrackMode = 'TRM_AUDIO_NOPRE'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 283027920, Index1FilePos = 283027920, NextTrackFilePos = 319465104
10: ISRC = '
Blocksize = 2352
TrackMode = 'TRM_AUDIO_NOPRE'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 319465104, Index1FilePos = 319465104, NextTrackFilePos = 360229968
CUES:
0: Ctrl=0x01 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
1: Ctrl=0x01 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
2: Ctrl=0x01 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
3: Ctrl=0x01 Trk= 2 (0x02) Index=00 RecDep=0x00 Start=04:13.37 ( 19012)
4: Ctrl=0x01 Trk= 2 (0x02) Index=01 RecDep=0x00 Start=04:13.37 ( 19012)
5: Ctrl=0x01 Trk= 3 (0x03) Index=00 RecDep=0x00 Start=07:43.47 ( 34772)
6: Ctrl=0x01 Trk= 3 (0x03) Index=01 RecDep=0x00 Start=07:43.47 ( 34772)
7: Ctrl=0x01 Trk= 4 (0x04) Index=00 RecDep=0x00 Start=10:19.20 ( 46445)
8: Ctrl=0x01 Trk= 4 (0x04) Index=01 RecDep=0x00 Start=10:19.20 ( 46445)
9: Ctrl=0x01 Trk= 5 (0x05) Index=00 RecDep=0x00 Start=13:27.17 ( 60542)
10: Ctrl=0x01 Trk= 5 (0x05) Index=01 RecDep=0x00 Start=13:27.17 ( 60542)
11: Ctrl=0x01 Trk= 6 (0x06) Index=00 RecDep=0x00 Start=16:19.15 ( 73440)
12: Ctrl=0x01 Trk= 6 (0x06) Index=01 RecDep=0x00 Start=16:19.15 ( 73440)
13: Ctrl=0x01 Trk= 7 (0x07) Index=00 RecDep=0x00 Start=20:22.35 ( 91685)
14: Ctrl=0x01 Trk= 7 (0x07) Index=01 RecDep=0x00 Start=20:22.35 ( 91685)
15: Ctrl=0x01 Trk= 8 (0x08) Index=00 RecDep=0x00 Start=23:24.72 ( 105372)
16: Ctrl=0x01 Trk= 8 (0x08) Index=01 RecDep=0x00 Start=23:24.72 ( 105372)
17: Ctrl=0x01 Trk= 9 (0x09) Index=00 RecDep=0x00 Start=26:42.35 ( 120185)
18: Ctrl=0x01 Trk= 9 (0x09) Index=01 RecDep=0x00 Start=26:42.35 ( 120185)
19: Ctrl=0x01 Trk= 10 (0x10) Index=00 RecDep=0x00 Start=30:09.02 ( 135677)
20: Ctrl=0x01 Trk= 10 (0x10) Index=01 RecDep=0x00 Start=30:09.02 ( 135677)
21: Ctrl=0x01 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=34:00.09 ( 153009)
MTYP: Mediumtype = CD (old format) (0x1)
Image file name: <C:\Documents and Settings\Richard\My Documents\TempImage.nrg>
1:06:08 PM #5 Text 0 File Burncd.cpp, Line 3200
Turn on Disc-at-once, using CD-R/RW media
1:06:39 PM #6 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 359846 ( 79:59.71)
Last address to be written: 153008 ( 34:02.08)
1:06:39 PM #7 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE
1:06:39 PM #8 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: HL-DT-ST DVDRAM GSA-4081B;
CDR code: 00 97 32 19; OSJ entry from: Prodisc Technology Inc.
ATIP Data:
Special Info [hex] 1: E0 00 B0, 2: 61 20 13 (LI 97:32.19), 3: 4F 3B 48 (LO 79:59.72)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
1:06:39 PM #9 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: CD-R/RW.)
1:06:39 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_AUDIO_NOPRE (1 - Audio)
2 indices, index0 (150) provided
original disc pos #0 + 19012 (19012) = #19012/4:13.37
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 19012 blocks [HL-DT-ST DVDRAM GSA-4081B]
1: TRM_AUDIO_NOPRE (2 - Audio)
2 indices, index0 (0) not provided
original disc pos #19012 + 15760 (15760) = #34772/7:43.47
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 15760 blocks [HL-DT-ST DVDRAM GSA-4081B]
2: TRM_AUDIO_NOPRE (3 - Audio)
2 indices, index0 (0) not provided
original disc pos #34772 + 11673 (11673) = #46445/10:19.20
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 11673 blocks [HL-DT-ST DVDRAM GSA-4081B]
3: TRM_AUDIO_NOPRE (4 - Audio)
2 indices, index0 (0) not provided
original disc pos #46445 + 14097 (14097) = #60542/13:27.17
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 14097 blocks [HL-DT-ST DVDRAM GSA-4081B]
4: TRM_AUDIO_NOPRE (5 - Audio)
2 indices, index0 (0) not provided
original disc pos #60542 + 12898 (12898) = #73440/16:19.15
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 12898 blocks [HL-DT-ST DVDRAM GSA-4081B]
5: TRM_AUDIO_NOPRE (6 - Audio)
2 indices, index0 (0) not provided
original disc pos #73440 + 18245 (18245) = #91685/20:22.35
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 18245 blocks [HL-DT-ST DVDRAM GSA-4081B]
6: TRM_AUDIO_NOPRE (7 - Audio)
2 indices, index0 (0) not provided
original disc pos #91685 + 13687 (13687) = #105372/23:24.72
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 13687 blocks [HL-DT-ST DVDRAM GSA-4081B]
7: TRM_AUDIO_NOPRE (8 - Audio)
2 indices, index0 (0) not provided
original disc pos #105372 + 14813 (14813) = #120185/26:42.35
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 14813 blocks [HL-DT-ST DVDRAM GSA-4081B]
8: TRM_AUDIO_NOPRE (9 - Audio)
2 indices, index0 (0) not provided
original disc pos #120185 + 15492 (15492) = #135677/30:9.2
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 15492 blocks [HL-DT-ST DVDRAM GSA-4081B]
9: TRM_AUDIO_NOPRE (10 - Audio)
2 indices, index0 (0) not provided
original disc pos #135677 + 17332 (17332) = #153009/34:0.9
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 17332 blocks [HL-DT-ST DVDRAM GSA-4081B]
--------------------------------------------------------------
1:06:39 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [HL-DT-ST DVDRAM GSA-4081B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 10:
1: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 0 352800 45069024, ISRC ""
2: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 45069024 45069024 82136544, ISRC ""
3: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 82136544 82136544 109591440, ISRC ""
4: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 109591440 109591440 142747584, ISRC ""
5: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 142747584 142747584 173083680, ISRC ""
6: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 173083680 173083680 215995920, ISRC ""
7: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 215995920 215995920 248187744, ISRC ""
8: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 248187744 248187744 283027920, ISRC ""
9: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 283027920 283027920 319465104, ISRC ""
10: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 319465104 319465104 360229968, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x01
-150 | 1 | 0 | 0x00 | 0x01
0 | 1 | 1 | 0x00 | 0x01
19012 | 2 | 0 | 0x00 | 0x01
19012 | 2 | 1 | 0x00 | 0x01
34772 | 3 | 0 | 0x00 | 0x01
34772 | 3 | 1 | 0x00 | 0x01
46445 | 4 | 0 | 0x00 | 0x01
46445 | 4 | 1 | 0x00 | 0x01
60542 | 5 | 0 | 0x00 | 0x01
60542 | 5 | 1 | 0x00 | 0x01
73440 | 6 | 0 | 0x00 | 0x01
73440 | 6 | 1 | 0x00 | 0x01
91685 | 7 | 0 | 0x00 | 0x01
91685 | 7 | 1 | 0x00 | 0x01
105372 | 8 | 0 | 0x00 | 0x01
105372 | 8 | 1 | 0x00 | 0x01
120185 | 9 | 0 | 0x00 | 0x01
120185 | 9 | 1 | 0x00 | 0x01
135677 | 10 | 0 | 0x00 | 0x01
135677 | 10 | 1 | 0x00 | 0x01
153009 | lead-out | 1 | 0x00 | 0x01
1:06:39 PM #12 Phase 36 File dlgbrnst.cpp, Line 1841
Burn process started at 24x (3,600 KB/s)
1:06:39 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
1:06:39 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 1 (not relocatable, no disc pos, no patch infos, orig at #19012): write at #19012
1:06:39 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 2 (not relocatable, no disc pos, no patch infos, orig at #34772): write at #34772
1:06:39 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 3 (not relocatable, no disc pos, no patch infos, orig at #46445): write at #46445
1:06:39 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 4 (not relocatable, no disc pos, no patch infos, orig at #60542): write at #60542
1:06:39 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 5 (not relocatable, no disc pos, no patch infos, orig at #73440): write at #73440
1:06:39 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 6 (not relocatable, no disc pos, no patch infos, orig at #91685): write at #91685
1:06:39 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 7 (not relocatable, no disc pos, no patch infos, orig at #105372): write at #105372
1:06:39 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 8 (not relocatable, no disc pos, no patch infos, orig at #120185): write at #120185
1:06:39 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 9 (not relocatable, no disc pos, no patch infos, orig at #135677): write at #135677
1:06:39 PM #23 Text 0 File Mmc.cpp, Line 15445
StartDAO : CD-Text - On
1:06:39 PM #24 Text 0 File Mmc.cpp, Line 20051
Set BUFE: supported -> ON
1:06:39 PM #25 Text 0 File Mmc.cpp, Line 15734
CueData, Len=104
01 00 00 41 00 00 00 00
01 01 00 00 00 00 00 00
01 01 01 00 00 00 02 00
01 02 01 00 00 04 0f 25
01 03 01 00 00 07 2d 2f
01 04 01 00 00 0a 15 14
01 05 01 00 00 0d 1d 11
01 06 01 00 00 10 15 0f
01 07 01 00 00 14 18 23
01 08 01 00 00 17 1a 48
01 09 01 00 00 1a 2c 23
01 0a 01 00 00 1e 0b 02
01 aa 01 01 00 22 02 09
1:07:34 PM #26 SCSI -1039 File Cdrdrv.cpp, Line 1439
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04590000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x2A 0x00 0x00 0x00 0x4D 0x1D 0x00 0x00 0x1B 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x10
0x34 0x10 0x04 0x80 0x09 0x01
1:07:34 PM #27 CDR -1039 File Writer.cpp, Line 304
Focus or tracking error
1:07:34 PM #28 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
1:07:34 PM #29 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
1:07:35 PM #30 SCSI -1039 File Cdrdrv.cpp, Line 1185
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x10
0x34 0x10 0x04 0x80 0x09 0x01
1:07:35 PM #31 CDR -1039 File WriterStatus.cpp, Line 164
Focus or tracking error
1:07:35 PM #32 TRANSFER -24 File WriterStatus.cpp, Line 164
Could not perform end of Disc-at-once
1:07:35 PM #33 Phase 38 File dlgbrnst.cpp, Line 1841
Burn process failed at 24x (3,600 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=7.0.1.39 , size=24576 bytes, created 4/3/2004 1:32:20 AM
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 8:00:00 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
 |
|
|
|
ScubaPete
AfterDawn Addict
|
28. September 2004 @ 17:55 |
Link to this message
|
|
SjRick,
If you're trying to backup a DVD you might want to use a DVD disc instead of a CD disc.
A question for you, do you have a DVD burner ?
You'll need a seperate burner to burn DVD's, a CD burner can't do it. After you install a DVD burner you'll need DVD discs to burn a DVD also, CD discs cannot do the job as they are a bit too small.
Is it possible you pasted the wrong log ??
Cheers friend,
Pete
|
|
SjRick
Junior Member
|
28. September 2004 @ 20:20 |
Link to this message
|
your right i must have posted the wrong log,,, i think im going to experiment a bit,, im going to uninstall service pack 2 then uninstall both DVD Shrink and Nero,, re-install them and see what happens,, i will post what happens,, i think service pack 2 is screwing up a lot of people,,
|
|
cynthia_
Member
|
29. September 2004 @ 09:16 |
Link to this message
|
If you have installed SP2 then you must download and run Nero 6.3.1.20 or above.
|
|
ScubaPete
AfterDawn Addict
|
29. September 2004 @ 15:47 |
Link to this message
|
If you are going to uninstall Nero you must do a "clean" uninstall.
Use all of Nero's Clean tools:
General Clean tool
Registry cleaner and driver cleaner
InCD Clean tool (and checker)
When you reinstall Nero 6 DO NOT install InCD OR if you do, turn it off in msconfig (better to not install it) it can and does cause problems with other proggys.
|
|
Rammie
Suspended due to non-functional email address
|
7. October 2004 @ 11:21 |
Link to this message
|
|
So just out of curiousity..
I am now getting the focus or tracking error
Any ideas as to what this it??
|
|
ScubaPete
AfterDawn Addict
|
7. October 2004 @ 15:07 |
Link to this message
|
|
Hi there rammie, welcome to aD,
Could you tell us alittle about what you're doing and with what you're doing it with ?
After filling us in with your proggys, PC etc. could you tell us exactly where you're having trouble and with what ?
"P"
|
|
Rammie
Suspended due to non-functional email address
|
8. October 2004 @ 00:45 |
Link to this message
|
Sorry.. burning a backup DVD
Using Nero to burn the video files.
Dvd burner is an LG (latest firmware installed.)
Ritek DVD-R
XP Pro SP2
Anything else?
|
|
ScubaPete
AfterDawn Addict
|
8. October 2004 @ 18:54 |
Link to this message
|
Rammis,
A bit better -
Quote:
Using Nero to burn the video files.
May I assume you have ALL of your files inside a folder that's named VIDEO_TS written EXACTLY like that, all in CAPs ?
May I also assume that you're using Nero's Burning ROM in the Classic mode and NOT in the Wizard as you should be ?
May I suggest that you lower your burning speed to 4X OR if you're having trrouble there try 2.4X and see if you still get the same error -
Let me know how you make out -
Pete
|
|
Rammie
Suspended due to non-functional email address
|
9. October 2004 @ 02:40 |
Link to this message
|
|
You can assume all those except for the burning at 2.4
Thanks I'll try that and let you know.
BTW my burner is hooked up as a secondary drive and not a master.. can that make any difference?
|
|
ScubaPete
AfterDawn Addict
|
9. October 2004 @ 18:37 |
Link to this message
|
|
Yes Rammie, you should have that burner on a primary.
Change that around and see the difference :P)
Let me know how you make out -
Pete
|
|
Rammie
Suspended due to non-functional email address
|
17. October 2004 @ 16:04 |
Link to this message
|
|
Ok.. so since I know nothing of what this stuff means.. here is the log.
I also have switched the burner around so it's now the master
{bold)Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 8/14/2002 3:03:36 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM
Nero version: 6.3.1.25
Recorder: <HL-DT-ST DVDRAM GSA-4082B>Version: A207 - HA 1 TA 0 - 6.3.1.25
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVDRAM GSA-4082B>Version: A207 - HA 1 TA 0 - 6.3.1.25
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD400JB-00ETA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 4D040H2 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4082B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4082 D: CDRom0
HL-DT-ST CD-RW GCE-8160B F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 264MB (270844kB)
Memory in use : 48 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
17.10.2004
UDF/ISO compilation
5:56:35 PM #1 Phase 112 File dlgbrnst.cpp, Line 1855
DVD-Video files reallocation started
5:56:36 PM #2 Phase 114 File dlgbrnst.cpp, Line 1855
DVD-Video files reallocation completed (no file modified)
5:56:36 PM #3 Text 0 File Isodoc.cpp, Line 6083
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
5:56:36 PM #4 Phase 111 File dlgbrnst.cpp, Line 1855
DVD-Video files sorted
5:56:36 PM #5 Text 0 File Reader.cpp, Line 126
Reader running
5:56:36 PM #6 Text 0 File Writer.cpp, Line 124
Writer HL-DT-ST DVDRAM GSA-4082B running
5:56:36 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
5:56:36 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
5:56:36 PM #9 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-at-once, using DVD media
5:56:36 PM #10 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286127 (508:01.52, 4465MB)
5:56:36 PM #11 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)
5:56:36 PM #12 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: HL-DT-ST DVDRAM GSA-4082B, Media type: DVD-R
Disc Manufacturer: RITEKG - 04
Disc Application Code: 64, Disc Physical Code: 193
5:56:36 PM #13 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
5:56:36 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [HL-DT-ST DVDRAM GSA-4082B]
--------------------------------------------------------------
5:56:36 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [HL-DT-ST DVDRAM GSA-4082B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286128 | lead-out | 1 | 0x00 | 0x41
5:56:37 PM #16 Phase 24 File dlgbrnst.cpp, Line 1855
Caching of files started
5:56:37 PM #17 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.
5:56:37 PM #18 Phase 25 File dlgbrnst.cpp, Line 1855
Caching of files completed
5:56:37 PM #19 Phase 32 File dlgbrnst.cpp, Line 1855
Simulation started at 2x (2,770 KB/s)
5:56:37 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
5:56:37 PM #21 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 28:15,558 (1695558ms) -> OK
5:56:37 PM #22 Text 0 File DVDR.cpp, Line 2000
Recording mode: Sequential Recording Mode
5:56:37 PM #23 Text 0 File Mmc.cpp, Line 20660
Set BUFE: supported -> ON
5:56:37 PM #24 Text 0 File DVDR.cpp, Line 2141
Start write address at LBA 0
DVD high compatibility mode: Yes
5:56:37 PM #25 Text 0 File Cdrdrv.cpp, Line 8230
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
5:56:40 PM #26 Text 0 File Cdrdrv.cpp, Line 1297
17:56:40.234 - HL-DT-ST DVDRAM GSA-4082B\H1 T0 : Queue again later
6:25:30 PM #27 Text 0 File WriterStatus.cpp, Line 115
<HL-DT-ST DVDRAM GSA-4082B> start writing Lead-Out at LBA 2286128 (22E230h), lenght 0 blocks
6:25:30 PM #28 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
6:25:30 PM #29 Text 0 File DVDR.cpp, Line 2383
EndDAO: Last written address was 2286127
6:26:09 PM #30 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
6:26:09 PM #31 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
6:26:09 PM #32 Phase 33 File dlgbrnst.cpp, Line 1855
Simulation completed successfully at 2x (2,770 KB/s)
6:26:10 PM #33 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 2x (2,770 KB/s)
6:26:10 PM #34 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:26:10 PM #35 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 28:15,558 (1695558ms) -> OK
6:26:10 PM #36 Text 0 File DVDR.cpp, Line 2000
Recording mode: Sequential Recording Mode
6:26:10 PM #37 Text 0 File Mmc.cpp, Line 20660
Set BUFE: supported -> ON
6:26:10 PM #38 Text 0 File DVDR.cpp, Line 2141
Start write address at LBA 0
DVD high compatibility mode: Yes
6:26:10 PM #39 Text 0 File Cdrdrv.cpp, Line 8230
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 25E22F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
6:26:17 PM #40 Text 0 File Cdrdrv.cpp, Line 1297
18:26:17.718 - HL-DT-ST DVDRAM GSA-4082B\H1 T0 : Queue again later
6:54:39 PM #41 SCSI -1039 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x081E0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x2A 0x00 0x00 0x22 0x49 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x10
0x32 0x34 0x04 0x0C 0x09 0x01
6:54:39 PM #42 CDR -1039 File Writer.cpp, Line 304
Focus or tracking error
6:54:39 PM #43 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
6:54:39 PM #44 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
6:54:39 PM #45 Text 0 File DVDR.cpp, Line 2383
EndDAO: Last written address was 2247103
6:54:39 PM #46 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
6:54:39 PM #47 CDR -1039 File WriterStatus.cpp, Line 164
Focus or tracking error
6:54:39 PM #48 TRANSFER -24 File WriterStatus.cpp, Line 164
Could not perform end of Disc-at-once
6:54:39 PM #49 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
6:54:39 PM #50 Phase 38 File dlgbrnst.cpp, Line 1855
Burn process failed at 2x (2,770 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 8/14/2002 3:03:36 PM
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 5/19/2004 12:33:44 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 0, 5, size=93440 bytes, created 9/13/2004 11:54:06 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 0, 5, size=28672 bytes, created 9/13/2004 11:54:46 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 0, 5, size=7680 bytes, created 9/13/2004 11:58:10 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Any help as to why I am getting these focusing or tracking error or the can not perform disc at once error would be appreciated..
|
|
cynthia_
Member
|
17. October 2004 @ 18:25 |
Link to this message
|
|
|
|
ScubaPete
AfterDawn Addict
|
17. October 2004 @ 19:21 |
Link to this message
|
|
What type of media are you using ?
|
|
Rammie
Suspended due to non-functional email address
|
18. October 2004 @ 03:41 |
Link to this message
|
|
Memorex DVD-R 50 pack spindle
|
|
ScubaPete
AfterDawn Addict
|
18. October 2004 @ 12:38 |
Link to this message
|
|
Rammie,
Made by CMC, Dye type unknown.
Once again, try to change media.
I've posted the best medias, you really need to try some of them. Enough said. Pple make their own choices and should be left alone.
Cheers,
Pete
|
|
Rammie
Suspended due to non-functional email address
|
18. October 2004 @ 13:10 |
Link to this message
|
|
I understand the media problem but now that I have tried and switched everything around the way it was suggested it won't burn anything.. it keeps saying waiting for the drive to become ready.
Media aside.. is this a problem I can fix.??
|
|
ScubaPete
AfterDawn Addict
|
18. October 2004 @ 15:23 |
Link to this message
|
|
Rammie,
If the burner will play DVD's and if it's seen by My Computer - it should also burn CD's.
If the above is right then when you change media a lot will go away.
Think of it like a car with 4 flat tires. You can't tell if the car is driving right until you fix the tires. When the tires are fixed then you'll be able to take it out on the road and see if everything else is OK -
Think on it and it should become clear -
Cheers,
Pete
|
|
Rammie
Suspended due to non-functional email address
|
18. October 2004 @ 16:31 |
Link to this message
|
|
Thanks Scuba.. actually it did make sense..
I have to check to see if it will play DVDs though
|
|
BigJMoney
Newbie
|
18. October 2004 @ 22:10 |
Link to this message
|
Hi, I'm having a similar problem, so I thought I'd try here...please help! I'm also getting a "focus or tracking error" every time I try to burn a DVD.
I'm running an HP 2.5GHz Pentium 4 w/512 MB of RAM. My DVD-RW is an HP DVD Writer 200i. I'm using DVD Decrypter to decrypt, DVD Shrink to make the image files (vob, etc.) and Nero Xpress (Nero 6) to burn. I've tried two different types of discs - a Sony DVD+R and an HP DVD+R.
Every time, my disc gets about 25% done, and then crashes and gives me the error. I've tried everything. I turned the burn speed down, I updated the driver for the burner, I updated the firmware for the burner from HP's website (version 1.72). I even went so far as to reformat my hard drive, load only Nero, DVD Decryptor and DVD Shrink, and try it again. Still no luck. I tried burning directly from Shrink (i.e. burn to disk using their interface for Nero, instead of saving the image and using Nero separately). No dice.
The only one other thing that I can think of, is that when I reformat, since my HP has a hard drive partition, I don't get to pick and choose what I reistall, since it "resets" to factory settings. This means that I also have RecordNow software installed. However, I don't want to uninstall it, because they don't give you install discs for it with the computer, which means I'd have to do a full system recovery if I want it back.
So, any suggestions?
|
|
BigJMoney
Newbie
|
18. October 2004 @ 22:32 |
Link to this message
|
|
Here is the error log, sorry it's so long...
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero version: 6.3.1.11 (Nero Express)
Recorder: <HP DVD Writer 200j> Version: 1.72 - HA 1 TA 0 - 6.3.1.11
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SAMSUNG CD-ROM SC-148C >Version: B100 - HA 1 TA 1 - 6.3.1.11
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SV8004H atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 200j atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-ROM SC-148C atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HP DVD Writer 200j E: CDRom3
SAMSUNG CD-ROM SC-148C F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 503MB (515564kB)
Free physical memory: 230MB (235752kB)
Memory in use : 54 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
19.10.2004
UDF/ISO compilation
12:33:13 AM #1 Phase 112 File dlgbrnst.cpp, Line 1836
DVD-Video files reallocation started
12:33:13 AM #2 Phase 114 File dlgbrnst.cpp, Line 1836
DVD-Video files reallocation completed (no file modified)
12:33:13 AM #3 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
12:33:13 AM #4 Phase 111 File dlgbrnst.cpp, Line 1836
DVD-Video files sorted
12:33:13 AM #5 Text 0 File Reader.cpp, Line 118
Reader running
12:33:13 AM #6 Text 0 File Writer.cpp, Line 124
Writer HP DVD Writer 200j running
12:33:13 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
12:33:13 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
12:33:13 AM #9 Text 0 File Burncd.cpp, Line 3196
Turn on Disc-at-once, using DVD media
12:33:13 AM #10 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1875695 (416:49.20, 3663MB)
12:33:13 AM #11 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE
12:33:13 AM #12 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: HP DVD Writer 200j, Media type: DVD+R
12:33:13 AM #13 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:33:13 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 1875696 (1875696) = #1875696/416:49.21
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1875696 blocks [HP DVD Writer 200j ]
--------------------------------------------------------------
12:33:13 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [HP DVD Writer 200j ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3841425408, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1875696 | lead-out | 1 | 0x00 | 0x41
12:33:13 AM #16 Phase 24 File dlgbrnst.cpp, Line 1836
Caching of files started
12:33:13 AM #17 Text 0 File Burncd.cpp, Line 4206
Cache writing successful.
12:33:13 AM #18 Phase 25 File dlgbrnst.cpp, Line 1836
Caching of files completed
12:33:13 AM #19 Phase 36 File dlgbrnst.cpp, Line 1836
Burn process started at 2.4x (3,312 KB/s)
12:33:14 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:33:14 AM #21 SCSI -1066 File Cdrdrv.cpp, Line 1187
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03616000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00
12:33:14 AM #22 Text 0 File DVDR.cpp, Line 4312
Drive: HP DVD Writer 200j
Book Type request: DVD-ROM
Changing the book type was finish with error code: 0
12:33:14 AM #23 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 19:39,170 (1179170ms) -> OK
12:33:14 AM #24 Text 0 File DVDPlusRW.cpp, Line 618
Start write address at LBA 0
DVD high compatibility mode: Yes
12:39:45 AM #25 SCSI -1039 File Cdrdrv.cpp, Line 1441
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x09B60000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x06 0xDB 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x04 0x00 0x06 0xD9 0x80 0x0C
0x00 0x00 0x00 0x00 0x09 0x02
12:39:45 AM #26 CDR -1039 File Writer.cpp, Line 304
Focus or tracking error
12:39:45 AM #27 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
12:39:45 AM #28 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
12:39:48 AM #29 Phase 127 File dlgbrnst.cpp, Line 1836
Generating DVD high compatibility borders
12:42:05 AM #30 SCSI -1039 File Cdrdrv.cpp, Line 1187
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x09 0x01
12:42:05 AM #31 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK
12:42:05 AM #32 Phase 130 File dlgbrnst.cpp, Line 1836
Generating DVD borders aborted
12:42:05 AM #33 Text 0 File DVDR.cpp, Line 4312
Drive: HP DVD Writer 200j
Book Type request: DVD-ROM
Changing the book type was finish with error code: 0
12:42:05 AM #34 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK
12:42:05 AM #35 Phase 39 File dlgbrnst.cpp, Line 1836
Burn process aborted
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.40a, size=16416 bytes, created 10/21/2002 12:02:00 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
ScubaPete
AfterDawn Addict
|
19. October 2004 @ 14:12 |
Link to this message
|
Hi there BigJMoney,
It almost looks like you're trying to burn an ISO image from DVD Shrink using Nero Express.
I read your post as -
Quote:
I'm using DVD Decrypter to decrypt, DVD Shrink to make the image files (vob, etc.) and Nero Xpress (Nero 6) to burn
You want to be selecting "Hard Disc Folder" and then your location where you want DVD Shrink's VOB files to go in "Backup", "Target Device". You'll know when it's right when you have "Create VIDEO_TS and AUDIO_TS sub-folders" with a little "Box" that has a "tick" in it.
When you wish use Nero to burn Nero's VOB files, you'll do much better using Nero's Classic "Burning ROM" in the New Compilation Window.
Use this guide:
BURNING WITH Nero CLASSIC
HINT:
First, create a folder for your work on your desktop OR your HD. - Name it something that you'll be able to find. I named mine C:\All My DVD Work\\The Last Samurai sings Swami (off key). Now load your IFO, BUP and VOB files there - make sure they are in a folder named VIDEO_TS written like that (all in Caps) - some programs like DVD Shrink will make the properly named folder for you, others you must make the folder yourself - Nero needs that folder with all it's contents in order to work properly -
Burning a file made by DVD Shrink.
If you had used DVD Shrink to create a file on your HD you are truly in great shape. When you wish to burn, use the "File Browser" in Nero Classic (don't use Wizard), trace your path back to "All DVD Work\ \The Last Samurai sings Swami (off key)", you don't have to remember where your work is or if you need to do anymore work on it, it is completely finished, ready to go - -
OK then, is everyone comfy ? Good - its now time for - -
"Uncle" ScubaPete's Step by Step, Let's burn with Nero 6 Guide -
First - Do not use Nero Wizard -
Please follow along EXACTLY - (might even want to PRINT IT OUT, it'll make following easier, don't ya know ?)
In case you're finding Nero's Burning ROM hard to find (sometimes it really is hiding (Lol). Go to "Start", "All Programs", "Nero", "Nero 6 Ultra Edition" and there you'll find "Nero Burning ROM" :)
When you open Nero Burning ROM, you will be at the "New Compilation" window. Directly under the title "New Compilation" is a choice block to choose either DVD or CD, choose "DVD". Directly under that click on the "DVD Video Icon." Then click "New" in the upper right corner of that screen, NOT the main screen.
You now are in the "DVD Video" window. In the left screen, click "VIDEO_TS". In the "File Browser" screen, 3rd from the left, trace your path to the VIDEO_TS folder, the one you made earlier holding all of your files and click on that folder. All of your VIDEO_TS files are now opened in the right screen. Click on the top file, hold down the "Shift" key and then click the bottom file thereby hi-lighting the entire column of files. Click and (holding the left mouse button down) drag the entire column of files to the open screen, second from the left and release the mouse button.
Now click the icon on the task bar that shows a match on a disc, and then click "OK" and now, clear the room, stand up tall and shout out, "Burn Baby, BURN" ! One more time, let me hear you say it, "Who's your Daddy Now ???"
Guess what my Friend ? You are done !!!
(Wheeew, now I really need a cigarette)
NOW, STEP AWAY FROM THE COMPUTER ! !
Keep all fingers and toes away from Ms. Computer. Never mess with the lady when she's working - it would be hazardous to your health, you understand -
Go and have your coffee, when Nero is done, she'll let you know ;-))
NOW, if you are going to backup an ISO image, follow this -
When using Nero to burn your ISO image, use Nero StartSmart - "Click" the DVD tab in upper right - then "click" the 5th tab, under DVD tab "Copy and backup" then choose "Burn Image to Disc". This should open Nero Express. Use this to burn your ISO Image to your blank DVD.
Enjoy your backup,
and Let us know what you're using and how you made out -
Pete
PS Both Sony and HP are good discs.
|
|
Rammie
Suspended due to non-functional email address
|
19. October 2004 @ 16:20 |
Link to this message
|
|
As usual the info provided was correct.
Turns out the DVD drive calfed on me..
It's getting sent back tomorrow. to the manufacturer
|
|
BigJMoney
Newbie
|
19. October 2004 @ 16:53 |
Link to this message
|
|
Excellent! Thanks, ScubaPete! I'm going to try this asap, and I'll let you know how it goes (hopefully well, so I don't tear any more hair out).
Thanks again!
|
|
Advertisement
|
|
|
|
ScubaPete
AfterDawn Addict
|
19. October 2004 @ 17:35 |
Link to this message
|
|
Ok Guys, BOTH of you -
Let's not think about saying "Goodbye" just yet -
We'd still like you to stop by and visit even when you don't have problems you need help with - "Pop" in when you can and cruise around the different forums. You never know when we might have something that can make your computer work a little easier. You might pickup some valuable tips to boot. Checkout the "Safety Valve", it's a place where we "Chew the fat" on just about every topic under the sun. As an extra added bonus, when you see another person with a problem and you feel you might know something that could help, join in. As the Ogre said to the Cyclops, " Three heads are better than two." (Lol) You'll then see how much fun we have helping others. As a current member of our little club you can welcome the new guys in -
We'll look forward to seeing you. "Me ?" You'll find me hangin' out over there by the water cooler, sittin' under the potted palm with my feet propped up, sipping on a "cold one", waiting for the next "Newbie" with a problem that I can help them with - maybe you'd like to join me . . . ?
Sea ya soon -
Pete ;p)
|
|
