|
|
|
DMA Off
|
|
|
playea
Junior Member
|
20. October 2004 @ 04:13 |
Link to this message
|
|
nero says my dma is off but when i checked they are all on. I went to device manager turned it on. But still nero says its off. What do i do to fix this?
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/28/2004 4:51:12 PM
Nero version: 6.6.0.0
Recorder: <NU DVDRW DDW-082> Version: B377 - HA 0 TA 1 - 6.6.0.0
Adapter driver: <nvatabus> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 2 TA 0 - 6.6.0.0
Adapter driver: <d347prt> HA 2
=== Scsi-Device-Map ===
CdRomPeripheral : ATAPI DVD-ROM 16XMax nvatabus Port 0 ID 0 DMA: Off
CdRomPeripheral : NU DVDRW DDW-082 nvatabus Port 0 ID 1 DMA: Off
DiskPeripheral : WDC WD1200JB-00GVA0 nvatabus Port 0 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
NU DVDRW DDW-082 E: CDRom1
Generic DVD-ROM F: CDRom2
ATAPI DVD-ROM 16XMax D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 688MB (704876kB)
Memory in use : 32 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
19.10.2004
UDF/ISO compilation
3:48:08 PM #1 Phase 112 File dlgbrnst.cpp, Line 1861
DVD-Video files reallocation started
3:48:08 PM #2 Phase 114 File dlgbrnst.cpp, Line 1861
DVD-Video files reallocation completed (no file modified)
3:48:08 PM #3 Text 0 File Isodoc.cpp, Line 6170
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
3:48:08 PM #4 Phase 111 File dlgbrnst.cpp, Line 1861
DVD-Video files sorted
3:48:08 PM #5 Text 0 File Reader.cpp, Line 127
Reader running
3:48:08 PM #6 Text 0 File Writer.cpp, Line 122
Writer NU DVDRW DDW-082 running
3:48:08 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
3:48:08 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
3:48:08 PM #9 Text 0 File Burncd.cpp, Line 3119
Turn on Disc-at-once, using DVD media
3:48:08 PM #10 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1113743 (247:29.68, 2175MB)
3:48:08 PM #11 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)
3:48:08 PM #12 Text 0 File DlgWaitCD.cpp, Line 2310
Recorder: NU DVDRW DDW-082, Media type: DVD-RW
Disc Manufacturer: RITEKW - 01
Disc Application Code: 64, Disc Physical Code: 214
3:48:08 PM #13 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
3:48:08 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1113744 (1113744) = #1113744/247:29.69
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1113744 blocks [NU DVDRW DDW-082]
--------------------------------------------------------------
3:48:08 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1045
Prepare recorder [NU DVDRW DDW-082] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2280947712, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1113744 | lead-out | 1 | 0x00 | 0x41
3:48:08 PM #16 Phase 24 File dlgbrnst.cpp, Line 1861
Caching of files started
3:48:08 PM #17 Text 0 File Burncd.cpp, Line 4135
Cache writing successful.
3:48:08 PM #18 Phase 25 File dlgbrnst.cpp, Line 1861
Caching of files completed
3:48:08 PM #19 Phase 36 File dlgbrnst.cpp, Line 1861
Burn process started at 2x (2,770 KB/s)
3:48:08 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2471
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
3:48:08 PM #21 Text 0 File dlgbrnst.cpp, Line 1719
Set remaining time: 14:09,072 (849072ms) -> OK
3:48:08 PM #22 Text 0 File DVDR.cpp, Line 1955
Recording mode: Sequential Recording Mode
3:48:08 PM #23 Text 0 File Mmc.cpp, Line 20542
Set BUFE: Seamless Link -> ON
3:48:08 PM #24 Text 0 File DVDR.cpp, Line 2096
Start write address at LBA 0
DVD high compatibility mode: Yes
3:48:08 PM #25 Text 0 File Cdrdrv.cpp, Line 8259
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
3:48:32 PM #26 Text 0 File DVDR.cpp, Line 4778
Drive: NU DVDRW DDW-082
Book Type request: DVD-ROM, write to EEPROM
Changing the book type was finished with error code: 0
4:02:26 PM #27 Text 0 File WriterStatus.cpp, Line 116
<NU DVDRW DDW-082 > start writing Lead-Out at LBA 1113744 (10FE90h), lenght 0 blocks
4:02:26 PM #28 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
4:02:27 PM #29 Text 0 File DVDR.cpp, Line 2338
EndDAO: Last written address was 1113743
4:02:42 PM #30 SCSI -1135 File Cdrdrv.cpp, Line 1175
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x0C 0x00
4:02:42 PM #31 Text 0 File DVDR.cpp, Line 4778
Drive: NU DVDRW DDW-082
Book Type request: DVD-RW, write to EEPROM
Changing the book type was finished with error code: 0
4:02:42 PM #32 Text 0 File dlgbrnst.cpp, Line 1719
Set remaining time: 0:00,000 (0ms) -> OK
4:02:42 PM #33 CDR -1135 File ThreadedTransferInterface.cpp, Line 1774
Write error
4:02:42 PM #34 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1774
Could not perform end of Disc-at-once
4:02:42 PM #35 Text 0 File DVDR.cpp, Line 2338
EndDAO: Last written address was -1
4:02:42 PM #36 Text 0 File DVDR.cpp, Line 4778
Drive: NU DVDRW DDW-082
Book Type request: DVD-RW, write to EEPROM
Changing the book type was finished with error code: 0
4:02:42 PM #37 Text 0 File dlgbrnst.cpp, Line 1719
Set remaining time: 0:00,000 (0ms) -> OK
4:02:42 PM #38 Text 0 File dlgbrnst.cpp, Line 1719
Set remaining time: 0:00,000 (0ms) -> OK
4:02:42 PM #39 Phase 38 File dlgbrnst.cpp, Line 1861
Burn process failed at 2x (2,770 KB/s)
Existing drivers:
File 'Drivers\nvatabus.sys': Ver=5.10.2600.0412 built by: WinDDK, size=63744 bytes, created 1/12/2004 11:36:00 PM (Adapter driver for rec)
File 'Drivers\d347prt.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 8/22/2004 4:31:48 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
 |
|
|
|
playea
Junior Member
|
20. October 2004 @ 16:03 |
Link to this message
|
|
I hate this forum no one replys
|
Moderator
|
20. October 2004 @ 17:01 |
Link to this message
|
Quote:
I hate this forum no one replys
Not a very good attitude I see.
First off ... have some patience, we are all here on our free time.
Second ... try the search function, this has been discussed.
Last, try to uninstall your ide channels, reboot and let your O/S re-install them. After reboot, double check to make sure dma is still enabled then check with Nero Info tool.
This message has been edited since posting. Last time this message was edited on 20. October 2004 @ 17:02
|
|
playea
Junior Member
|
20. October 2004 @ 17:11 |
Link to this message
|
|
yes i did that already. It can burn cds i dont know why it cant burn dvds. I have a NU DDW 082 dvd burner. Also the blank media i am using is memorex dvd-rw 1x-2x
|
Moderator
|
20. October 2004 @ 17:32 |
Link to this message
|
|
If uninstalling them didn't work, you might try getting new ide cables.
|
|
Jeanc1
Suspended permanently
|
20. October 2004 @ 18:00 |
Link to this message
|
|
Did you check your BIOS settings ? is DMA activated there --- and is it set to UltraATA/100 or UltraATA/66 depending on your PC capacity ?
|
|
playea
Junior Member
|
20. October 2004 @ 18:18 |
Link to this message
|
OK now it when i burn with Nero i completes 100% but when i put the disc back in to see whats on there it says its empty. here is the log.
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/28/2004 4:51:12 PM
Nero version: 6.6.0.0
Recorder: <NU DVDRW DDW-082> Version: B375 - HA 0 TA 1 - 6.6.0.0
Adapter driver: <nvatabus> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 2 TA 0 - 6.6.0.0
Adapter driver: <d347prt> HA 2
=== Scsi-Device-Map ===
CdRomPeripheral : ATAPI DVD-ROM 16XMax nvatabus Port 0 ID 0 DMA: Off
CdRomPeripheral : NU DVDRW DDW-082 nvatabus Port 0 ID 1 DMA: Off
DiskPeripheral : WDC WD1200JB-00GVA0 nvatabus Port 0 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
NU DVDRW DDW-082 E: CDRom1
Generic DVD-ROM F: CDRom2
ATAPI DVD-ROM 16XMax D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 697MB (714512kB)
Memory in use : 31 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
20.10.2004
UDF/ISO compilation
8:58:29 PM #1 Phase 112 File dlgbrnst.cpp, Line 1861
DVD-Video files reallocation started
8:58:29 PM #2 Phase 114 File dlgbrnst.cpp, Line 1861
DVD-Video files reallocation completed (no file modified)
8:58:29 PM #3 Text 0 File Isodoc.cpp, Line 6170
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
8:58:29 PM #4 Phase 111 File dlgbrnst.cpp, Line 1861
DVD-Video files sorted
8:58:29 PM #5 Text 0 File Reader.cpp, Line 127
Reader running
8:58:29 PM #6 Text 0 File Writer.cpp, Line 122
Writer NU DVDRW DDW-082 running
8:58:29 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
8:58:29 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
8:58:29 PM #9 Text 0 File Burncd.cpp, Line 3119
Turn on Disc-at-once, using DVD media
8:58:29 PM #10 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1113743 (247:29.68, 2175MB)
8:58:29 PM #11 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)
8:58:29 PM #12 Text 0 File DlgWaitCD.cpp, Line 2310
Recorder: NU DVDRW DDW-082, Media type: DVD-RW
Disc Manufacturer: RITEKW - 01
Disc Application Code: 64, Disc Physical Code: 214
8:58:29 PM #13 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
8:58:29 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1113744 (1113744) = #1113744/247:29.69
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1113744 blocks [NU DVDRW DDW-082]
--------------------------------------------------------------
8:58:29 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1045
Prepare recorder [NU DVDRW DDW-082] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2280947712, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1113744 | lead-out | 1 | 0x00 | 0x41
8:58:29 PM #16 Phase 24 File dlgbrnst.cpp, Line 1861
Caching of files started
8:58:29 PM #17 Text 0 File Burncd.cpp, Line 4135
Cache writing successful.
8:58:29 PM #18 Phase 25 File dlgbrnst.cpp, Line 1861
Caching of files completed
8:58:29 PM #19 Phase 36 File dlgbrnst.cpp, Line 1861
Burn process started at 2x (2,770 KB/s)
8:58:29 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2471
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
8:58:29 PM #21 Text 0 File dlgbrnst.cpp, Line 1719
Set remaining time: 14:09,072 (849072ms) -> OK
8:58:29 PM #22 Text 0 File DVDR.cpp, Line 1955
Recording mode: Sequential Recording Mode
8:58:29 PM #23 Text 0 File Mmc.cpp, Line 20542
Set BUFE: Seamless Link -> ON
8:58:29 PM #24 Text 0 File DVDR.cpp, Line 2096
Start write address at LBA 0
DVD high compatibility mode: Yes
8:58:29 PM #25 Text 0 File Cdrdrv.cpp, Line 8259
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
8:58:52 PM #26 Text 0 File DVDR.cpp, Line 4778
Drive: NU DVDRW DDW-082
Book Type request: DVD-ROM, write to EEPROM
Changing the book type was finished with error code: 0
9:12:40 PM #27 Text 0 File WriterStatus.cpp, Line 116
<NU DVDRW DDW-082 > start writing Lead-Out at LBA 1113744 (10FE90h), lenght 0 blocks
9:12:40 PM #28 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
9:12:40 PM #29 Text 0 File DVDR.cpp, Line 2338
EndDAO: Last written address was 1113743
9:13:02 PM #30 Text 0 File DVDR.cpp, Line 4778
Drive: NU DVDRW DDW-082
Book Type request: DVD-RW, write to EEPROM
Changing the book type was finished with error code: 0
9:13:02 PM #31 Text 0 File dlgbrnst.cpp, Line 1719
Set remaining time: 0:00,000 (0ms) -> OK
9:13:02 PM #32 Text 0 File dlgbrnst.cpp, Line 1719
Set remaining time: 0:00,000 (0ms) -> OK
9:13:02 PM #33 Phase 37 File dlgbrnst.cpp, Line 1861
Burn process completed successfully at 2x (2,770 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'Drivers\nvatabus.sys': Ver=5.10.2600.0412 built by: WinDDK, size=63744 bytes, created 1/12/2004 11:36:00 PM (Adapter driver for rec)
File 'Drivers\d347prt.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 8/22/2004 4:31:48 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
playea
Junior Member
|
20. October 2004 @ 18:48 |
Link to this message
|
|
it is set to Ultra DMA 2 - Ulta33
|
|
Jeanc1
Suspended permanently
|
20. October 2004 @ 19:27 |
Link to this message
|
|
ultra33 ??????????????? you sure it's not ultra133 ?? what kind of PC you have ? You didnt give any details -- !
|
|
playea
Junior Member
|
20. October 2004 @ 19:40 |
Link to this message
|
|
No it is Ultra 2 - Ultra 33
AMD 64 3200+
Chaintech VNF3-250
1GB Geil RAM
120GB Hard Drive
NU DDW 082
|
|
playea
Junior Member
|
20. October 2004 @ 19:54 |
Link to this message
|
|
that ultra 2 - ultra33 is said in my device manager but i cannot set dma in bios. I cannot find it
|
|
playea
Junior Member
|
21. October 2004 @ 12:42 |
Link to this message
|
|
that ultra 2 - ultra33 is set in my device manager but i do not know how to set it in BIOS
|
|
Advertisement
|
|
|
|
playea
Junior Member
|
23. October 2004 @ 10:39 |
Link to this message
|
Also when i burn SVCD on cd-rw it works fine. Here is the log for that.
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/28/2004 4:51:12 PM
Nero version: 6.6.0.0
Recorder: <NU DVDRW DDW-082> Version: B375 - HA 0 TA 1 - 6.6.0.0
Adapter driver: <nvatabus> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 2 TA 0 - 6.6.0.0
Adapter driver: <d347prt> HA 2
=== Scsi-Device-Map ===
CdRomPeripheral : ATAPI DVD-ROM 16XMax nvatabus Port 0 ID 0 DMA: Off
CdRomPeripheral : NU DVDRW DDW-082 nvatabus Port 0 ID 1 DMA: Off
DiskPeripheral : WDC WD1200JB-00GVA0 nvatabus Port 0 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
NU DVDRW DDW-082 E: CDRom1
Generic DVD-ROM F: CDRom2
ATAPI DVD-ROM 16XMax D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 701MB (717876kB)
Memory in use : 31 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.10.2004
Super Video CD
7:18:53 PM #1 Text 0 File VCDDoc.cpp, Line 1350
VideoCD document burn settings
------------------------------------------
Compilation type : SVCD
Menu : Disable
Picture in separate folder : FALSE
Use CD-I : TRUE
CD-I configuration : CONTROLS=ALL
CURCOL=YELLOW
PSDCURCOL=RED
PSDCURSHAPE=ARROW
CENTRTRACK=2
AUTOPLAY=AUTO_ON
DUALCHAN=DUAL_ON
TIMECODE_X=64
TIMECODE_Y=100
LOTID_X=64
LOTID_Y=64
ALBUM=STANDARD
Encoding bitrate mode : User defined (kb/s)
7:18:53 PM #2 Text 0 File VCDCompilationImpl.cpp, Line 635
Super Video CD compatibility options:
Videos directory: MPEG2
ENTRIES.SVD File Identification: ENTRYVCD
7:18:53 PM #3 Text 0 File Isodoc.cpp, Line 6170
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 2 / XA
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
7:18:53 PM #4 Text 0 File VCDDoc.cpp, Line 2819
SVCD options:
-----------------------------------------------------
Create standard compliant CD: YES
Encoding resolution: NTSC
Encoding bitrate mode: 0
Fit to size in min: 74
Video directory: MPEG2
ENTRIES.SVD file ID: ENTRYVCD
-----------------------------------------------------
7:18:53 PM #5 Text 0 File Burncd.cpp, Line 2834
NU DVDRW DDW-082
Seamless Link activated
7:18:53 PM #6 Text 0 File Reader.cpp, Line 127
Reader running
7:18:53 PM #7 Text 0 File Writer.cpp, Line 122
Writer NU DVDRW DDW-082 running
7:18:53 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
7:18:53 PM #9 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
7:18:53 PM #10 Text 0 File Burncd.cpp, Line 3119
Turn on Disc-at-once, using CD-R/RW media
7:18:53 PM #11 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 359850 ( 80:00.00)
Last address to be written: 344021 ( 76:28.71)
7:18:53 PM #12 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)
7:18:53 PM #13 Text 0 File DlgWaitCD.cpp, Line 2310
Recorder: NU DVDRW DDW-082;
CDRW code: 00 97 25 30; OSJ entry from: INFODISC Technology Co., Ltd.
ATIP Data:
Special Info [hex] 1: D1 00 C6, 2: 61 19 1E (LI 97:25.30), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 02 4C B0, 2: 5C D8 36, 3: 00 00 00 (invalid)
7:18:53 PM #14 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
7:18:53 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE2_2336 ()
2 indices, index0 (150) not provided
original disc pos #0 + 600 (600) = #600/0:8.0
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_ULTRARAW96_MODE2, 2448, config 4, wanted index0 0 blocks, length 600 blocks [NU DVDRW DDW-082]
1: TRM_DATA_MODE2_2336 (Napoleon Dynamite_00)
2 indices, index0 (150) not provided
original disc pos #0 + 343272 (343272) = #343272/76:16.72
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_ULTRARAW96_MODE2, 2448, config 4, wanted index0 0 blocks, length 343272 blocks [NU DVDRW DDW-082]
--------------------------------------------------------------
7:18:53 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1045
Prepare recorder [NU DVDRW DDW-082] for write in raw writing
DAO infos:
==========
MCN: ""
TOCType: 0x20; Session Closed, disc fixated
Tracks 1 to 2:
1: TRM_ULTRARAW96_MODE2, 2448/0x04, FilePos 0 367200 1836000, ISRC ""
2: TRM_ULTRARAW96_MODE2, 2448/0x04, FilePos 1836000 2203200 842533056, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
600 | 2 | 0 | 0x00 | 0x41
750 | 2 | 1 | 0x00 | 0x41
344022 | lead-out | 1 | 0x00 | 0x41
7:18:53 PM #17 Phase 24 File dlgbrnst.cpp, Line 1861
Caching of files started
7:18:54 PM #18 Text 0 File Burncd.cpp, Line 4135
Cache writing successful.
7:18:54 PM #19 Phase 25 File dlgbrnst.cpp, Line 1861
Caching of files completed
7:18:54 PM #20 Phase 36 File dlgbrnst.cpp, Line 1861
Burn process started at 4x (600 KB/s)
7:18:54 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2471
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
7:18:54 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2471
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #750
7:18:54 PM #23 Text 0 File Mmc.cpp, Line 15894
StartDAO : CD-Text - Off
7:18:54 PM #24 Text 0 File Mmc.cpp, Line 20542
Set BUFE: Seamless Link -> ON
7:38:56 PM #25 Text 0 File WriterStatus.cpp, Line 116
<NU DVDRW DDW-082 > start writing Lead-Out at LBA 344022 (53FD6h), lenght 6750 blocks
7:39:19 PM #26 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
7:39:24 PM #27 Text 0 File dlgbrnst.cpp, Line 1719
Set remaining time: 0:00,000 (0ms) -> OK
7:39:24 PM #28 Phase 37 File dlgbrnst.cpp, Line 1861
Burn process completed successfully at 4x (600 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'Drivers\nvatabus.sys': Ver=5.10.2600.0412 built by: WinDDK, size=63744 bytes, created 1/12/2004 11:36:00 PM (Adapter driver for rec)
File 'Drivers\d347prt.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 8/22/2004 4:31:48 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
