NERO burning problems

Advertise at AfterDawn.com

Link to us!

Private messages

Compose a private message

List of all updated threads

Threads without replies

Search messages

Monday 23.2.2026 / 16:44

Search AfterDawn Forums:

afterdawn.com > forums > dvd±r discussion > dvd±r for newbies > nero burning problems - nec 2510

Browse by topic

Forums

Start a new thread

NERO burning problems - NEC 2510

Jump to:

Posted

Message

kepners

Junior Member

27. October 2004 @ 06:37

Link to this message

problem with DVD burners.

I use winXP-sp1 (only) + Nero 6.0136 (the newest) + IMG files to burn mounted from the slave drive 250GB + mounting using daemon. drive is are cleaned and defraged every week. Primary harddrive about 40GB and 50% full. Only burnt about 100DVD's

Now, when i first recieved my NEC2510 products i burned lots and lots of disks with no problem what-so-ever. until two weeks ago, where the lenght of time it takes to burn a single layer 4.7GB disk has gone up from (Nero predicted) 6mins30sec to the now over running 9min49sec.
I can actually hear what is happening the burners start up at 8xspeed then jump down to 4xspeed (@10%) for abotu 2mins then jump up again to 8speed.... carriers on then jumps down at about 54% then jumps up to 8xspeed (@63% when the time runs out)and finishes the rest of the durn off at 8speed.
what is going on please. i cant work it out.
When i first got the burners they would work to6mins regardless of whatever programs i ran in the back ground, but now anything that runs adds to the time.
I have updates my firmware as well. as one of the remadies. well it has managed to sort some of the time delay out, but its crept back to 9+mins from just over 8mins after the firmware update.

I cant work out whats going on. can someone help me.

[ + quote]

great website for news and video - http://www.toocoolfor.tv
and on facebook - http://www.facebook.com/toocoolfor.tv

check them out.

ccampbell

Senior Member

27. October 2004 @ 09:59

Link to this message

Can you post a log from one of these writes, so we can see what is occuring?

Be sure to edit out your Nero 6 serial key before posting the log file.

Regards,

Craig
Ahead Software
USA

[ + quote]

mcalister

Member

27. October 2004 @ 10:08

Link to this message

Hey ccampbell neros new version rocks !!

[ + quote]

later on

kepners

Junior Member

27. October 2004 @ 11:51

Link to this message

here you go.

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 12:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22/07/2004 17:33:44
Nero version: 6.3.1.20
Recorder: <_NEC DVD_RW ND-2510A> Version: 2.16 - HA 1 TA 0 - 6.3.1.20
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <_NEC DVD_RW ND-2510A >Version: 2.16 - HA 1 TA 0 - 6.3.1.20
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD400BB-00DEA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6Y250P0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-2510A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-2510A atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
_NEC DVD_RW ND-2510A E: CDRom0
_NEC DVD_RW ND-2510A F: CDRom1
Generic DVD-ROM G: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 687MB (703500kB)
Memory in use : 32 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

27.10.2004
UDF/ISO compilation
20:39:08 #1 DVDREALLOC 5 File DVDVideoCompilation.cpp, Line 965
Backup file 'VTS_01_0.BUP' should be identical to 'VTS_01_0.IFO'

20:39:08 #2 Phase 117 File dlgbrnst.cpp, Line 1855
DVD-Video files compliance test failed

20:39:14 #3 Phase 132 File dlgbrnst.cpp, Line 1855
DVD-Video files compliance ignored

20:39:14 #4 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

20:39:14 #5 Phase 111 File dlgbrnst.cpp, Line 1855
DVD-Video files sorted

20:39:14 #6 Text 0 File DVDR.cpp, Line 5367
Booktype counter: 500, Booktype selected in RAM, command version 2

20:39:14 #7 Text 0 File DVDR.cpp, Line 5367
Booktype counter: 500, Booktype selected in RAM, command version 2

20:39:14 #8 Text 0 File Reader.cpp, Line 126
Reader running

20:39:14 #9 Text 0 File Writer.cpp, Line 124
Writer _NEC DVD_RW ND-2510A running

20:39:14 #10 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

20:39:14 #11 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

20:39:14 #12 Text 0 File Burncd.cpp, Line 3173
Turn on Disc-at-once, using DVD media

20:39:14 #13 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2184623 (485:28.23, 4266MB)

20:39:14 #14 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)

20:39:14 #15 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193

20:39:14 #16 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================

20:39:14 #17 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2184624 (2184624) = #2184624/485:28.24
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2184624 blocks [_NEC DVD_RW ND-2510A ]
--------------------------------------------------------------

20:39:14 #18 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [_NEC DVD_RW ND-2510A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4474109952, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2184624 | lead-out | 1 | 0x00 | 0x41

20:39:15 #19 Phase 24 File dlgbrnst.cpp, Line 1855
Caching of files started

20:39:15 #20 Text 0 File Burncd.cpp, Line 4183
Cache writing successful.

20:39:15 #21 Phase 25 File dlgbrnst.cpp, Line 1855
Caching of files completed

20:39:17 #22 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 8x (11,080 KB/s)

20:39:17 #23 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

20:39:17 #24 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 6:49,317 (409317ms) -> OK

20:39:17 #25 Text 0 File DVDR.cpp, Line 1942
Recording mode: Sequential Recording Mode

20:39:17 #26 Text 0 File Mmc.cpp, Line 20531
Set BUFE: supported -> ON

20:39:17 #27 Text 0 File DVDR.cpp, Line 2083
Start write address at LBA 0
DVD high compatibility mode: Yes

20:39:17 #28 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

20:39:17 #29 Text 0 File DVDR.cpp, Line 5367
Booktype counter: 500, Booktype selected in RAM, command version 2

20:39:17 #30 Text 0 File DVDR.cpp, Line 5367
Booktype counter: 500, Booktype selected in RAM, command version 2

20:39:17 #31 Text 0 File DVDR.cpp, Line 5367
Booktype counter: 500, Booktype selected in RAM, command version 2

20:39:17 #32 Text 0 File DVDR.cpp, Line 4661
Drive: _NEC DVD_RW ND-2510A
Booktype request: DVD-ROM, write to RAM
select Booktype setting from RAM

20:39:24 #33 Text 0 File Cdrdrv.cpp, Line 1294
20:39:24.046 - _NEC DVD_RW ND-2510A\H1 T0 : Queue again later

20:48:48 #34 Text 0 File WriterStatus.cpp, Line 115
<_NEC DVD_RW ND-2510A > start writing Lead-Out at LBA 2184624 (2155B0h), lenght 0 blocks

20:48:49 #35 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

20:48:49 #36 Text 0 File DVDR.cpp, Line 2325
EndDAO: Last written address was 2184623

20:48:58 #37 Text 0 File DVDR.cpp, Line 5367
Booktype counter: 500, Booktype selected in RAM, command version 2

20:48:58 #38 Text 0 File DVDR.cpp, Line 5367
Booktype counter: 500, Booktype selected in RAM, command version 2

20:48:58 #39 Text 0 File DVDR.cpp, Line 4661
Drive: _NEC DVD_RW ND-2510A
Booktype request: DVD-ROM, write to RAM
select Booktype setting from RAM

20:48:58 #40 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

20:48:58 #41 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

20:48:58 #42 Phase 161 File dlgbrnst.cpp, Line 1855
Burn process completed successfully with warnings

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 28/10/2003 11:02:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 09:27:50 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[ + quote]

great website for news and video - http://www.toocoolfor.tv
and on facebook - http://www.facebook.com/toocoolfor.tv

check them out.

ccampbell

Senior Member

27. October 2004 @ 12:29

Link to this message

Hi mcalistar,

Thanks for the comment. :-)

Hi Kepners,

The only thing I see that is causing a delay is that you did get a 'Queue again later' error, which means a command was issued to the Recorder, but it was busy. The next time the command was issued, the recorder was free and accepted the command.

20:39:17 #32 Text 0 File DVDR.cpp, Line 4661
Drive: _NEC DVD_RW ND-2510A
Booktype request: DVD-ROM, write to RAM
select Booktype setting from RAM

20:39:24 #33 Text 0 File Cdrdrv.cpp, Line 1294
20:39:24.046 - _NEC DVD_RW ND-2510A\H1 T0 : Queue again later

What caused the drive to be busy? I can only guess at this point, but it does look like this message occured after the command to Change the BookType to DVD-ROM. The process did complete, but there may be a problem here that either we need to look into, or the Recorder MFG does with their firmware. Each Recorder has a slightly different process for changing the booktype.

You can also try a different brand of media, to see if that helps, as it may.

Regards,

Craig
Ahead Software
USA

[ + quote]

kepners

Junior Member

27. October 2004 @ 12:38

Link to this message

So you think its nothing to do with Nero or my system or anything like that?
its a very weird and strange thing.
i guess i will have to put up with it, unless you have any ideas.

[ + quote]

great website for news and video - http://www.toocoolfor.tv
and on facebook - http://www.facebook.com/toocoolfor.tv

check them out.

ccampbell

Senior Member

27. October 2004 @ 13:28

Link to this message

The log file does not show anything that is going wrong, so I doubt it's your system.

It could be a firmware issue, or how we are implementing the Change BookType for that drive. We'll have to look at the drive from our end in Engineering and if it's a firmware issue report it to the MFG to address. If its our code, then we can address it.

So, it could be our software, it could be the firmware, or it could just be the media you are currently using.

Regards,

Craig

Ahead Software
USA

[ + quote]

Start a new thread


		User name	Password

		Not registered yet? Register here. Lost your password? Click here.