|
Hi I've got a new samsung TS552B Firmware TS04 and when burning +R dvds I dont get a single problem! but when burning stuff to -R dvds I just get errors.
I've tried different brands from Sony to Verbatim I even use Verbatim +R discs no problem.
I've tried burning at different Speeds and Different Buring Software(Nero, Clone DVD, Alcohol 120% etc not all installed at once).
The drive came with TSO3 Firmware and I updated to TS04 Firmware and still get same problem (although seems the burn a little bit more)
Nero Log File:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 10:03:20
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28/07/2004 16:51:12
Nero version: 6.6.0.1
Recorder: <TSSTcorp CD/DVDW TS-H552B>Version: TS04 - HA 3 TA 0 - 6.6.0.1
Adapter driver: <> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 2 TA 0 - 6.6.0.1
Adapter driver: <d346prt> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y160P0 nvatabus Port 0 ID 0 DMA: Off
CdRomPeripheral : TSSTcorp CD/DVDW TS-H552B nvatabus Port 0 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d346prt Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
Generic DVD-ROM F: CDRom1
TSSTcorp CD/DVDW TS-H552 D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 668MB (684140kB)
Memory in use : 34 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
7.11.2004
DVD-Copy on the fly
23:42:13 #1 Text 0 File Reader.cpp, Line 127
Reader running
23:42:13 #2 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW TS-H552B running
23:42:14 #3 Text 0 File DVDCopy.cpp, Line 267
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 2267300 (gap 0) Blank 0 Res 0 Dmg 0 Mode TRM_DATA_MODE1 (0)
23:42:14 #4 Text 0 File DVDCopy.cpp, Line 370
Max -1 tracks of 1 allowed to copy
1: 0 - 2267300 = 2267300, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
23:42:14 #5 Text 0 File Burncd.cpp, Line 3117
Turn on Disc-at-once, using DVD media
23:42:14 #6 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2267299 (503:50.49, 4428MB)
23:42:14 #7 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)
23:42:14 #8 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: TSSTcorp CD/DVDW TS-H552B, Media type: DVD-R
Disc Manufacturer: -
Disc Application Code: 64, Disc Physical Code: 193
23:42:14 #9 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
23:42:14 #10 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2267300 (2267300) = #2267300/503:50.50
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2267300 blocks [TSSTcorp CD/DVDW TS-H552B]
--------------------------------------------------------------
23:42:26 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1047
Prepare recorder [TSSTcorp CD/DVDW TS-H552B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4643430400, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2267300 | lead-out | 1 | 0x00 | 0x41
23:42:26 #12 Phase 28 File dlgbrnst.cpp, Line 1853
Speed measurement started
23:42:26 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2497
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
23:47:11 #14 Text 0 File WriterStatus.cpp, Line 116
<TSSTcorp CD/DVDW TS-H552B> start writing Lead-Out at LBA 2267300 (2298A4h), lenght 0 blocks
23:47:11 #15 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
23:47:11 #16 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK
23:47:11 #17 Phase 29 File dlgbrnst.cpp, Line 1804
Speed measurement completed: 11.7x (16,202 KB/s)
23:47:11 #18 Phase 36 File dlgbrnst.cpp, Line 1853
Burn process started at 2x (2,770 KB/s)
23:47:11 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2497
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
23:47:11 #20 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 28:01,964 (1681964ms) -> OK
23:47:11 #21 Text 0 File DVDR.cpp, Line 2027
Recording mode: Sequential Recording Mode
23:47:11 #22 Text 0 File Mmc.cpp, Line 20673
Set BUFE: Super Link -> ON
23:47:11 #23 Text 0 File DVDR.cpp, Line 2168
Start write address at LBA 0
DVD high compatibility mode: Yes
23:47:11 #24 Text 0 File Cdrdrv.cpp, Line 8281
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
23:47:24 #25 Text 0 File Cdrdrv.cpp, Line 1284
23:47:24.156 - TSSTcorp CD/DVDW TS-H552B\H3 T0 : Queue again later
23:47:28 #26 SCSI -1176 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x039C0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x01
CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x01
23:47:28 #27 CDR -1176 File Writer.cpp, Line 311
Session fixation error
23:47:29 #28 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
23:47:29 #29 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
23:47:29 #30 Text 0 File DVDR.cpp, Line 2410
EndDAO: Last written address was 607
23:47:29 #31 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK
23:47:29 #32 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK
23:47:29 #33 Phase 38 File dlgbrnst.cpp, Line 1853
Burn process failed at 2x (2,770 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 17/07/2002 09:05:10
File 'Drivers\d346prt.sys': Ver=3.46.0.0 built by: WinDDK, size=5248 bytes, created 12/03/2004 21:41:42 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
PLEASE HELP!
|
