|
Spiderchip flashed, no booting - now what??
|
|
|
erkme73
Junior Member
|
7. December 2004 @ 14:29 |
Link to this message
|
|
Admitedly, I am as wet behind the ears as it gets. I followed the directions from a website...
When i installed the spiderchip, it came up with the standard cromwell bios. I toggeld over to the flash bios from disc option, and put a xecuter2 bios (bios.bin) disc in the tray. it showed the flashing progress bar, and completed successfully. When it powered down and back up, the console started for about .5 seconds, shut off, tired it two more times, and on the third, stayed on with blinking green/red power.
I've done quite a bit of searching before posting this, so please don't flame me. I figure the bios either didn't flash correctly, or it was a bad copy. Either way, it appears I'm stuck with no workable bios on the chip. Are there any homemade fixes for the spiderchip to try to flash it again?
THANKS!!
|
|
Advertisement
|
|
|
|
|
tommyl
Suspended due to non-functional email address
|
8. December 2004 @ 10:33 |
Link to this message
|
|
try double checking your wires on the chip mine did same thing a wire just came loose good luck
|
|
erkme73
Junior Member
|
8. December 2004 @ 10:35 |
Link to this message
|
|
Agreed - unfortunately I did that nearly until by fingers bled. It's definately not the wiring or alignment issue. I'm pretty sure it's a bad flash, but I don't know how to recover from this.
|
|
tommyl
Suspended due to non-functional email address
|
8. December 2004 @ 10:51 |
Link to this message
|
|
?
This message has been edited since posting. Last time this message was edited on 23. December 2004 @ 05:19
|
|
erkme73
Junior Member
|
8. December 2004 @ 10:55 |
Link to this message
|
|
Just shot you an email... Is Evox the bios that will allow backups?
|
|
tommyl
Suspended due to non-functional email address
|
8. December 2004 @ 11:02 |
Link to this message
|
|
yes it is i will also include halo2 killswitch and 007 everything or nothing sent you an e0mail also but not sure if it went threw yet
|
|
tommyl
Suspended due to non-functional email address
|
8. December 2004 @ 11:31 |
Link to this message
|
|
i have paypal now
|
|
tommyl
Suspended due to non-functional email address
|
8. December 2004 @ 11:43 |
Link to this message
|
|
sorry but foe some reason paypal is not accepting my card?????? if you could help it would be great or just send money order would like to get paypal working though sorry i am not e-mailing but account went crazy
|
|
tommyl
Suspended due to non-functional email address
|
8. December 2004 @ 11:51 |
Link to this message
|
|
llllllllllllll
This message has been edited since posting. Last time this message was edited on 8. December 2004 @ 13:02
|
|
tommyl
Suspended due to non-functional email address
|
8. December 2004 @ 11:58 |
Link to this message
|
|
it is also a hacked bios so you can play backups
|
|
tommyl
Suspended due to non-functional email address
|
8. December 2004 @ 12:08 |
Link to this message
|
|
would you like to call me or for me to call you and which number to use
|
|
erkme73
Junior Member
|
8. December 2004 @ 14:05 |
Link to this message
|
|
Call me on my mobile 2476.. thanks
|
|
whiteone
Suspended due to non-functional email address
|
8. December 2004 @ 15:16 |
Link to this message
|
|
dose anyone know if the Slayer Evox auto-installer V2.6 Would work with the spider chip?
|
|
drummercp
Suspended due to non-functional email address
|
9. December 2004 @ 05:58 |
Link to this message
|
|
I've also had a bad flash w/ my spiderchip, been all over the net, apparently there is no programmer out that will attach to the spiderchip to flash without using a CD, does anyone know of a way to reflash a bad flashed spiderchip?
|
|
lgflynn
Suspended due to non-functional email address
|
10. December 2004 @ 02:06 |
Link to this message
|
|
Mmmm seems to be a trend here, I also had a bad flash! I had two spider chips & both seem to flash ok but would not boot after. Is there a programmer out for it yet?
|
|
drummercp
Suspended due to non-functional email address
|
10. December 2004 @ 05:07 |
Link to this message
|
|
if anyone knows of a programmer please please let me know, and what did you flash your chip with? which version bios? i've tried doing a hotswap but when i uplug my xchip it just reboots my xbox, anyone know how to get it not to reboot when pulling off an xchip and trying to do a hotswap flash?....
|
|
tommyl
Suspended due to non-functional email address
|
10. December 2004 @ 10:17 |
Link to this message
|
|
i used evox bios m8_16 for my install works great
|
|
tommyl
Suspended due to non-functional email address
|
10. December 2004 @ 10:18 |
Link to this message
|
|
?
This message has been edited since posting. Last time this message was edited on 23. December 2004 @ 05:18
|
|
drummercp
Suspended due to non-functional email address
|
10. December 2004 @ 10:32 |
Link to this message
|
|
That email doesn't work? i got a return.
|
|
bboy_flex
Member
|
10. December 2004 @ 11:36 |
Link to this message
|
|
I thought that the evox M8_16 only works on the version 1.6. Have you tried using that flash on xboxes other than the 1.6.
|
|
whiteone
Suspended due to non-functional email address
|
10. December 2004 @ 12:08 |
Link to this message
|
|
tommyl what other preflashed chips do u have e-mail me at Reversepiledrive@yahoo.com
|
|
bboy_flex
Member
|
10. December 2004 @ 15:39 |
Link to this message
|
|
Hey whitehorse i suggest that you edit out your e-mial and send him a private messege instead, only because there is a big chance that spammers will get your e-mail adress and start sending u stuff that you really dont want.
|
|
monster54
Newbie
|
10. December 2004 @ 18:47 |
Link to this message
|
|
How do you reflash a flashed SpiderChip Mod Chip. I tried using the Cromwell v2.4.0 bios file and it keeps trying to boot linux. I realize after the fact that this bios file isn't for backed up games. It is for running Linux on XBox. Any suggestions as how I should go about doing this or should I try and buy another one and install another bios file like the M8_16 bios file? Please advise. Thanks!
|
|
bboy_flex
Member
|
10. December 2004 @ 19:05 |
Link to this message
|
|
Im not 100% sure but isn't the M8_16 only for versions 1.6. If this is true and u don't have a version 1.6 then i would suggest flashing it with the M8 and not the M8_16.
|
|
Advertisement
|
|
|
|
lgflynn
Suspended due to non-functional email address
|
11. December 2004 @ 03:01 |
Link to this message
|
|
Hi Folks is there any flash programmer that will work on the spider chip as I had a bad flash. Thanks
This message has been edited since posting. Last time this message was edited on 11. December 2004 @ 03:02
|
