|
this is my log of my new problem....
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 11:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22/07/2004 16:33:44
Nero version: 6.3.1.20
Recorder: <_NEC DVD_RW ND-2510A> Version: 2.16 - HA 1 TA 0 - 6.3.1.20
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <_NEC DVD_RW ND-2510A >Version: 2.16 - HA 1 TA 0 - 6.3.1.20
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD400BB-00DEA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6Y250P0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-2510A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-2510A atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 1 DMA: Off
=== CDRom-Device-Map ===
_NEC DVD_RW ND-2510A E: CDRom0
_NEC DVD_RW ND-2510A F: CDRom1
Generic DVD-ROM G: CDRom2
Generic DVD-ROM H: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 597MB (611664kB)
Memory in use : 41 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
12.12.2004
UDF/ISO compilation
18:43:17 #1 Phase 112 File dlgbrnst.cpp, Line 1855
DVD-Video files reallocation started
18:43:17 #2 Phase 114 File dlgbrnst.cpp, Line 1855
DVD-Video files reallocation completed (no file modified)
18:43:17 #3 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
18:43:17 #4 Phase 111 File dlgbrnst.cpp, Line 1855
DVD-Video files sorted
18:43:17 #5 Text 0 File DVDR.cpp, Line 5367
Booktype counter: 500, Booktype selected in EEPROM, command version 2
18:43:17 #6 Text 0 File DVDR.cpp, Line 5367
Booktype counter: 500, Booktype selected in EEPROM, command version 2
18:43:17 #7 Text 0 File Reader.cpp, Line 126
Reader running
18:43:17 #8 Text 0 File Writer.cpp, Line 124
Writer _NEC DVD_RW ND-2510A running
18:43:17 #9 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
18:43:17 #10 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
18:43:17 #11 Text 0 File Burncd.cpp, Line 3173
Turn on Disc-at-once, using DVD media
18:43:17 #12 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2287327 (508:17.52, 4467MB)
18:43:17 #13 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)
18:43:17 #14 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193
18:43:17 #15 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
18:43:17 #16 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2287328 (2287328) = #2287328/508:17.53
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2287328 blocks [_NEC DVD_RW ND-2510A ]
--------------------------------------------------------------
18:43:17 #17 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [_NEC DVD_RW ND-2510A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4684447744, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2287328 | lead-out | 1 | 0x00 | 0x41
18:43:18 #18 Phase 24 File dlgbrnst.cpp, Line 1855
Caching of files started
18:43:18 #19 Text 0 File Burncd.cpp, Line 4183
Cache writing successful.
18:43:18 #20 Phase 25 File dlgbrnst.cpp, Line 1855
Caching of files completed
18:43:18 #21 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 8x (11,080 KB/s)
18:43:18 #22 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
18:43:18 #23 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 7:07,856 (427856ms) -> OK
18:43:18 #24 Text 0 File DVDR.cpp, Line 1942
Recording mode: Sequential Recording Mode
18:43:18 #25 Text 0 File Mmc.cpp, Line 20531
Set BUFE: supported -> ON
18:43:18 #26 Text 0 File DVDR.cpp, Line 2083
Start write address at LBA 0
DVD high compatibility mode: Yes
18:43:18 #27 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
18:43:18 #28 Text 0 File DVDR.cpp, Line 5367
Booktype counter: 500, Booktype selected in EEPROM, command version 2
18:43:18 #29 Text 0 File DVDR.cpp, Line 5367
Booktype counter: 500, Booktype selected in EEPROM, command version 2
18:43:18 #30 Text 0 File DVDR.cpp, Line 5367
Booktype counter: 500, Booktype selected in EEPROM, command version 2
18:43:18 #31 Text 0 File DVDR.cpp, Line 4661
Drive: _NEC DVD_RW ND-2510A
Booktype request: DVD-ROM, write to RAM
select Booktype setting from RAM
18:43:26 #32 Text 0 File Cdrdrv.cpp, Line 1294
18:43:26.829 - _NEC DVD_RW ND-2510A\H1 T0 : Queue again later
18:53:16 #33 Text 0 File WriterStatus.cpp, Line 115
<_NEC DVD_RW ND-2510A > start writing Lead-Out at LBA 2287328 (22E6E0h), lenght 0 blocks
18:53:16 #34 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
18:53:16 #35 Text 0 File DVDR.cpp, Line 2325
EndDAO: Last written address was 2287327
18:53:46 #36 SCSI -1093 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x02 0x00
18:53:46 #37 Text 0 File DVDR.cpp, Line 5367
Booktype counter: 500, Booktype selected in RAM, command version 2
18:53:46 #38 Text 0 File DVDR.cpp, Line 5367
Booktype counter: 500, Booktype selected in RAM, command version 2
18:53:46 #39 Text 0 File DVDR.cpp, Line 4661
Drive: _NEC DVD_RW ND-2510A
Booktype request: DVD-ROM, write to RAM
select Booktype setting from RAM
18:53:46 #40 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
18:53:46 #41 CDR -1093 File ThreadedTransferInterface.cpp, Line 1708
No seek complete
18:53:46 #42 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1708
Could not perform end of Disc-at-once
18:53:47 #43 Text 0 File DVDR.cpp, Line 2325
EndDAO: Last written address was -1
18:53:47 #44 Text 0 File DVDR.cpp, Line 5367
Booktype counter: 500, Booktype selected in RAM, command version 2
18:53:47 #45 Text 0 File DVDR.cpp, Line 5367
Booktype counter: 500, Booktype selected in RAM, command version 2
18:53:47 #46 Text 0 File DVDR.cpp, Line 4661
Drive: _NEC DVD_RW ND-2510A
Booktype request: DVD-ROM, write to RAM
select Booktype setting from RAM
18:53:47 #47 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
18:53:47 #48 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
18:53:47 #49 Phase 38 File dlgbrnst.cpp, Line 1855
Burn process failed at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 11:06:00
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 28/10/2003 10:02:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 08:27:50 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
can some help.
|
