|
|
|
Decrypter help, using scuba pete's guide
|
|
|
chip1018
Newbie
|
30. December 2004 @ 09:21 |
Link to this message
|
|
Hello I used shrink and then DVD decrypter and I printed and followed Scuba Pete's guide to the letter The first movie worked fine. I went to do my second, third and fourth movie and I get an error when it is in the process of writing lead in.
the error states
i/o error
Device: {2:1:0] HP DVD Writer 200j 1.36 (f) (ata)
scsistatus: 0x02
Interpretation: Check Condition
Cdb: 2A 00 00 00 00 00 00 00 20 00
Interpretation: Write (10) sectors: 0-31
I am using the same brand of media for all movies which is TDK
I am running windows XP
I have removed Roxio
I also get a error with Nero too which I don't know if they are related but probably are.
I have re-checked all my settings according to the guide and have started from step one about 25 times. I have tried different movies and still get the same error.
Can anyone help
Thanks so much.
|
|
Advertisement
|
  |
|
|
|
ScubaPete
AfterDawn Addict
|
31. December 2004 @ 17:33 |
Link to this message
|
a guide for Uninstalling Roxio and Nero,
"WHOAH there partner, I didn't say I wanted to get rid of Nero ~" No, you didn't. BUT if you had Nero on your PC along with Roxio then Nero almost assuredly has a corrupted file or 3. Just in case, so matters don't go "downhill," let's get everything up and running and in perfect shape. To do so, let's do a "CLEAN UNINSTALL" with Nero and then install it in perfect condition.
You say you have Roxio. Roxio is, IMO, the worst program you can have on your PC if you wish to work with DVD Video. It does it's best to trash almost every other DVD backup proggy there is except DVD Shrink. One extremely good program, Nero, is one that Roxio messes with the most. True there are a very few pple who have them both on their PC BUT by far, the vast majority of pple who have had them both on their PC's have had major headaches and have had to get rid of Roxio. As I'm sure any search through our threads will show you it's a wise decision. Even getting rid of Roxio is a problem as it weaves itself all through your system and you require a special proggy to get rid of it even after you've uninstalled it.
We're here because you've probably had trouble burning that can be traced to our archenemy Roxio CD-Creator or one of his henchmen.
The best way to rid our selves of Roxio is remove him through "Control Panel", "Add and Remove Programs".
After you've done that, I'm thinking you haven't gotten all of Roxio, actually you haven't, you need to run this -
Remove all types of Roxio tentacles and tendrils with Roxio Zapper ?
Find it here: http://www.microadvantage.net/downloads/zapper60.zip
Once you've done that, reboot your PC to "flush everything out of your PC's system :)
Now, again, you must uninstall Nero COMPLETELY.
This will help you do a "clean" uninstall.
You must use all of Nero's Clean tools in order to do the job correctly.
They can all be found here:
http://www.nero.com/us/631940828445001.htm
General Clean tool
Registry cleaner and driver cleaner
InCD Clean tool
When you reinstall Nero 6 DO NOT install InCD OR if you do, turn it off in msconfig (better to not install it) it can and does cause problems with other proggys.
Load Nero up from here:
http://www.ahead.de/us/nero6-ultraedition.php
When installing and uninstalling programs it's a good practice complete the operation with a PC reboot. It only takes a minute, help it can, hurt it won't.
Whenever you're uninstalling a program, it's a good practice to reboot your PC (even if it's not called for) to help "Flush" the program out. By the same token, when you install a program, it's a good practice to reboot your PC (even though it doesn't call for it) to help the "New" guy "Settle" it in.
Now that we've done that (I know it's a "Pain" but when it's done correctly the first time and all the steps are followed then we don't have problems AND we don't have to do it all over again.
IF YOU ALL OF THE STEPS (and didn't skip just one that "couldn't possibly" make a bit of difference) THEN, WE SHOULD BE GOOD TO GO - YIPPIEEE ! !
Now let's see how we do -
Pete
This message has been edited since posting. Last time this message was edited on 31. December 2004 @ 17:33
|
|
chip1018
Newbie
|
10. January 2005 @ 11:38 |
Link to this message
|
|
Thanks for all your help, it seems to be working great now. However I do have another question for you if you have the time. It seems about one out of three backups i do won't play on my DVD player, either the standalone or the computer. I don't receive any errors through the process and I get the operation completed successfully box. Same type of media which is TDK any suggestions from the after dawn God?
|
|
ScubaPete
AfterDawn Addict
|
10. January 2005 @ 16:49 |
Link to this message
|
|
"AfterDawn God" ?
PLEASE . . .
Try to reboot your PC and then play it - sometimes that works . .
"P"
|
|
summerlov
Junior Member
|
22. July 2005 @ 11:44 |
Link to this message
|
hey my problem is the same but I am not using roxio or Nero 6.. any ideas?
erro says
I/O error
Device (1:0:0) Sony dvd rw dw d26a jysi
|
|
summerlov
Junior Member
|
22. July 2005 @ 11:47 |
Link to this message
|
hey my problem is the same but I am not using roxio or Nero 6.. any ideas?
erro says
I/O error
Device (1:0:0) Sony dvd rw dw d26a jysi
(d)(scsi)
cdb : 2a 00 00 00 00 00 00 00 20 00
Interpertation : Write (10) - sectors :0-31
Reason I/O device error
I burned one dvd just fine.. using the same media i went to burn another and got this error.
|
AfterDawn Addict
6 product reviews
|
22. July 2005 @ 13:04 |
Link to this message
|
chip1018,
I'm by no means in the same league as "The Afterdawn God" but you didn't specify whether your TDK media was +r or -r. You should be ok with the -r but with +r you have about a 50% chance of getting some made by CMC Magnetics which is absolute garbage, very inconsistant, and can cause the problem you are having. If they are +r run one through this free proggy http://dvd.identifier.cdfreaks.com/ to determine who the manufacturer is.
summerlov,
What brand media are you useing?
Mort
Rig #1 Asus Rampage Formula Mobo, Intel Core2Quad Q9450 CPU @ 3.55ghz, 2gb Corsair DDR2 1066 Dominator Ram @ 5-5-5-15, TR Ultra 120 Extreme w/ Scythe 9 blade 110 cfm 120mm Fan HSF, HIS Radeon 512mb HD3850 IceQ TurboX GPU, Corsair 620HX P/S, CM Stacker 830 Evo Case, Rig #2 Asus P5W DH Deluxe Mobo, Intel C2D E6600 CPU @ 3.6ghz, 2gb Corsair XMS2 DDR2 800 Ram @ 4-4-4-12-2t, Zalman CNPS9500LED HSF, Sapphire Radeon X850XT PE GPU, Corsair 620HX P/S, Cooler Master Mystique Case, Viewsonic 20.1" Widescreen Digital LCD Monitor, Klipsch Promedia Ultra 5.1 THX Desktop Speakers, http://valid.x86-secret.com/show_oc.php?id=348351 http://valid.x86-secret.com/show_oc.php?id=236435This message has been edited since posting. Last time this message was edited on 22. July 2005 @ 13:08
|
|
summerlov
Junior Member
|
22. July 2005 @ 13:37 |
Link to this message
|
its a -r. I bought a 50 pack and used 4 of them already. they worked fine.. i have tried about 6 more and they all tell me the same thing
I 16:06:39 DVD Decrypter Version 3.5.4.0 started!
I 16:06:39 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
I 16:06:39 Initialising SPTI...
I 16:06:39 Searching for SCSI / ATAPI devices...
I 16:06:39 Found 1 CD-ROM, 1 DVD-ROM and 1 DVD±RW!
I 16:06:44 Operation Started!
I 16:06:44 Source File: C:\shrank\HITCH.ISO
I 16:06:44 Source File Sectors: 2,285,957 (MODE1/2048)
I 16:06:44 Source File Size: 4,681,639,936 bytes
I 16:06:44 Source File Implementation Identifier: DVD Shrink
I 16:06:44 Destination Device: [1:0:0] SONY DVD RW DW-D26A JYS1 (D:) (SCSI)
I 16:06:44 Destination Media Type: DVD-R (Disc ID: TYG02) (Speeds: 4x, 6x, 8x)
I 16:06:44 Destination Media Sectors: 2,298,496
I 16:06:44 Write Mode: DVD
I 16:06:44 Write Type: SAO
I 16:06:44 Write Speed: 4x
I 16:06:44 Link Size: Auto
I 16:06:44 Test Mode: No
I 16:06:44 BURN-Proof: Enabled
I 16:06:44 Filling Buffer...
I 16:06:45 Writing LeadIn...
W 16:07:07 Failed to Write Sectors 0 - 31 - The request could not be performed because of an I/O device error.
W 16:07:07 Retrying (1 of 20)...
W 16:07:11 Retry Failed - Logical Unit is in process of becoming ready
W 16:07:11 Retrying (2 of 20)...
W 16:07:12 Retry Failed - Logical Unit is in process of becoming ready
W 16:07:12 Retrying (3 of 20)...
W 16:07:12 Retry Failed - Logical Unit is in process of becoming ready
W 16:07:12 Retrying (4 of 20)...
I 16:07:12 Abort Request Acknowledged
W 16:07:12 Retry Failed - Logical Unit is in process of becoming ready
W 16:07:12 Retrying (5 of 20)...
W 16:07:13 Retry Failed - Logical Unit is in process of becoming ready
W 16:07:13 Retrying (6 of 20)...
W 16:07:13 Retry Failed - Logical Unit is in process of becoming ready
W 16:07:13 Retrying (7 of 20)...
W 16:07:13 Retry Failed - Logical Unit is in process of becoming ready
W 16:07:13 Retrying (8 of 20)...
W 16:07:14 Retry Failed - Logical Unit is in process of becoming ready
W 16:07:14 Retrying (9 of 20)...
W 16:07:14 Retry Failed - Logical Unit is in process of becoming ready
W 16:07:14 Retrying (10 of 20)...
W 16:07:15 Retry Failed - Logical Unit is in process of becoming ready
W 16:07:15 Retrying (11 of 20)...
W 16:07:15 Retry Failed - Logical Unit is in process of becoming ready
W 16:07:15 Retrying (12 of 20)...
W 16:07:15 Retry Failed - Logical Unit is in process of becoming ready
W 16:07:15 Retrying (13 of 20)...
W 16:07:16 Retry Failed - Logical Unit is in process of becoming ready
W 16:07:16 Retrying (14 of 20)...
W 16:07:16 Retry Failed - Logical Unit is in process of becoming ready
W 16:07:16 Retrying (15 of 20)...
W 16:07:16 Retry Failed - Not Ready To Ready Change - Medium May Have Changed
W 16:07:16 Retrying (16 of 20)...
W 16:07:16 Retry Failed - Command Sequence Error
W 16:07:16 Retrying (17 of 20)...
W 16:07:16 Retry Failed - Command Sequence Error
W 16:07:16 Retrying (18 of 20)...
W 16:07:16 Retry Failed - Command Sequence Error
W 16:07:16 Retrying (19 of 20)...
W 16:07:16 Retry Failed - Command Sequence Error
W 16:07:16 Retrying (20 of 20)...
W 16:07:16 Retry Failed! - Command Sequence Error
E 16:07:18 Failed to Write Sectors 0 - 31 - The request could not be performed because of an I/O device error.
I 16:07:18 Synchronising Cache...
E 16:07:18 Failed to Write Image!
E 16:07:18 Operation Failed! - Duration: 00:00:34
I 16:07:18 Average Write Rate: N/A - Maximum Write Rate: N/A
I 16:07:20 Close Request Acknowledged
I 16:07:20 Closing Down...
I 16:07:20 Shutting down SPTI...
I 16:07:20 DVD Decrypter closed!
|
AfterDawn Addict
6 product reviews
|
22. July 2005 @ 13:46 |
Link to this message
|
Rig #1 Asus Rampage Formula Mobo, Intel Core2Quad Q9450 CPU @ 3.55ghz, 2gb Corsair DDR2 1066 Dominator Ram @ 5-5-5-15, TR Ultra 120 Extreme w/ Scythe 9 blade 110 cfm 120mm Fan HSF, HIS Radeon 512mb HD3850 IceQ TurboX GPU, Corsair 620HX P/S, CM Stacker 830 Evo Case, Rig #2 Asus P5W DH Deluxe Mobo, Intel C2D E6600 CPU @ 3.6ghz, 2gb Corsair XMS2 DDR2 800 Ram @ 4-4-4-12-2t, Zalman CNPS9500LED HSF, Sapphire Radeon X850XT PE GPU, Corsair 620HX P/S, Cooler Master Mystique Case, Viewsonic 20.1" Widescreen Digital LCD Monitor, Klipsch Promedia Ultra 5.1 THX Desktop Speakers, http://valid.x86-secret.com/show_oc.php?id=348351 http://valid.x86-secret.com/show_oc.php?id=236435 |
|
summerlov
Junior Member
|
22. July 2005 @ 13:59 |
Link to this message
|
|
i dont know how to do that.. i downloaded it to my desktop.. also i clicked on my hardrive and told it to check for update it said there were none>
|
|
summerlov
Junior Member
|
22. July 2005 @ 14:26 |
Link to this message
|
|
also i burned one 2 days ago it went ok then tried yesterday no luck.. i dont think it is the update?? dont you have to flask it or something?? i dont know how to do any of that
|
|
ScubaPete
AfterDawn Addict
|
22. July 2005 @ 17:27 |
Link to this message
|
@ summerlov,
Mort81 told you that you needed a firmware update for your burner - you should have downloaded it to your C:\ drive not your desktop UNLESS you've somehow installed your burner to your desktop (I don't think that's possible ~).
Quote:
i clicked on my hardrive and told it to check for update it said there were none
I have no idea what you're doing there ~
What's wrong with your HD ?
Pete
|
|
ScubaPete
AfterDawn Addict
|
22. July 2005 @ 17:33 |
Link to this message
|
|
summerlov ?
May I ask why you posted your question on a thread that ended over 6 months ago ?,
Just curious ~
Pete
|
|
summerlov
Junior Member
|
22. July 2005 @ 18:02 |
Link to this message
|
|
ok what i meant was.. i clicked the link. then i clicked on what i think is the update it asked me save? i said yes and it went on my desktop i dont have a clue how to update my dvd drives firmware.. so the file is sitting on my desktop waiting for me to put it somewhere..
and i meant i clicked on my sony dvd and told it too look for updates it said there where none.. but i think i found out that doesnt mean for firmware
and lol i only posted it here cause i posted it somewhere else with no answers and the first thread sounded like my problem.. but the answer didnt work for me.. sorry if i did something wrong..
|
|
summerlov
Junior Member
|
22. July 2005 @ 18:06 |
Link to this message
|
|
ps.. i can still burn on my +rw its just the -r's.. i am just trying to figure out if tech geek put 5 good dvds on top of 45 bad ones. i just dont know if i got ripped off or if overnight something happened and i am not burning them right or something.. i am new to all this please bare with me
|
|
summerlov
Junior Member
|
24. July 2005 @ 15:58 |
Link to this message
|
ok.. i got my firmware update.. i tried new media brand and i downloaded the nero6 trial but of course none of this worked..
i can not burn at all except with my old +rw.. so any clues anyone this is what Nero said
User
Home
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.15
Internal Version: 6, 6, 0, 15h
(Nero Express)
Recorder: <SONY DVD RW DW-D26A> Version: JYS2 - HA 2 TA 0 - 6.6.0.15
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SCSI DVD-ROM >Version: 1.0 - HA 0 TA 0 - 6.6.0.15
Adapter driver: <VClone> HA 0
=== Scsi-Device-Map ===
CdRomPeripheral : SCSI DVD-ROM 1.0 VClone Port 0 ID 0 DMA: Off
DiskPeripheral : WDC WD800BB-00FRA0 77.0 nvidesm Port 1 ID 0 DMA: Off
CdRomPeripheral : SONY DVD RW DW-D26A JYS2 nvidesm Port 1 ID 0 DMA: Off
CdRomPeripheral : SONY CDU4811 PY0A nvidesm Port 1 ID 1 DMA: Off
=== CDRom-Device-Map ===
SCSI DVD-ROM F: CDRom2
SONY CDU4811 E: CDRom1
SONY DVD RW DW-D26A D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523764kB)
Free physical memory: 202MB (207836kB)
Memory in use : 60 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
24.7.2005
Burn DVD Image
7:50:08 PM #1 Text 0 File Reader.cpp, Line 127
Reader running
7:50:08 PM #2 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DW-D26A running
7:50:08 PM #3 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media
7:50:08 PM #4 Text 0 File DlgWaitCD.cpp, Line 269
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2089594 (464:21.19, 4081MB)
7:50:08 PM #5 Text 0 File DlgWaitCD.cpp, Line 281
Write in overburning mode: NO (enabled: CD)
7:50:08 PM #6 Text 0 File DlgWaitCD.cpp, Line 2477
Recorder: SONY DVD RW DW-D26A, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AF1
Disc Application Code: 64, Disc Physical Code: 193
7:50:08 PM #7 Text 0 File DlgWaitCD.cpp, Line 447
>>> Protocol of DlgWaitCD activities: <<<
=========================================
7:50:08 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2089595 (2089595) = #2089595/464:21.20
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2089595 blocks [SONY DVD RW DW-D26A]
--------------------------------------------------------------
7:50:08 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [SONY DVD RW DW-D26A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4279490560, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2089595 | lead-out | 1 | 0x41 | 0x00
7:50:09 PM #10 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
7:50:09 PM #11 Text 0 File Burncd.cpp, Line 4116
Cache writing successful.
7:50:09 PM #12 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
7:50:09 PM #13 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
7:50:09 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
7:50:09 PM #15 Text 0 File DVDR.cpp, Line 2357
Recording mode: Sequential Recording Mode
7:50:09 PM #16 Text 0 File Mmc.cpp, Line 21663
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON
7:50:09 PM #17 Text 0 File DVDR.cpp, Line 2511
Start write address at LBA 0
DVD high compatibility mode: Yes
7:50:09 PM #18 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
7:50:31 PM #19 SCSI -500 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x065D0000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
7:50:45 PM #20 SCSI -1023 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0B690600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x00
7:50:45 PM #21 CDR -1023 File Writer.cpp, Line 311
Command sequence error
7:50:45 PM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
7:50:45 PM #23 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
7:50:45 PM #24 Text 0 File DVDR.cpp, Line 2749
EndDAO: Last written address was -1
7:50:45 PM #25 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\VClone.sys': Ver=5, 0, 1, 1, size=22656 bytes, created 9/2/2004 9:45:13 AM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
AfterDawn Addict
6 product reviews
|
24. July 2005 @ 16:05 |
Link to this message
|
Quote:
Disc Manufacturer: CMC MA - G. AF1
CMC MAG is one of if not the worst media manufacturer out there. As posted by an afterdawn addict CMC = Crap Media Company.
I recommend verbatum, taiyo yuden, sony, or maxell.
Mort
|
|
summerlov
Junior Member
|
24. July 2005 @ 16:09 |
Link to this message
|
|
yeah i know that now. i bought this a couple months ago but it still is weird the top 5 of my 100 pack work and the rest dont
|
|
summerlov
Junior Member
|
24. July 2005 @ 16:12 |
Link to this message
|
|
my 100 pack is different media.. the CMC MA - G. AF1 is a 10 pack... the first 5 of the 100 worked
|
AfterDawn Addict
|
24. July 2005 @ 16:25 |
Link to this message
|
@summerlov
Quote:
CdRomPeripheral : SCSI DVD-ROM 1.0 VClone Port 0 ID 0 DMA: Off
DiskPeripheral : WDC WD800BB-00FRA0 77.0 nvidesm Port 1 ID 0 DMA: Off
CdRomPeripheral : SONY DVD RW DW-D26A JYS2 nvidesm Port 1 ID 0 DMA: Off
CdRomPeripheral : SONY CDU4811 PY0A nvidesm Port 1 ID 1 DMA: Off
You need to get your DMA turned on. Read guide on how to do this.
http://www.dvdplusvideo.com/dvdguide005.html
|
|
summerlov
Junior Member
|
24. July 2005 @ 16:30 |
Link to this message
|
|
yeah i know its off.. but no one can tell me how to find it.. i have asked all over the forums.. the instructions u sent do not take me there.. the only thing there is nvideo controllers
|
AfterDawn Addict
|
24. July 2005 @ 16:33 |
Link to this message
|
This message has been edited since posting. Last time this message was edited on 24. July 2005 @ 16:34
|
|
summerlov
Junior Member
|
24. July 2005 @ 16:37 |
Link to this message
|
|
thats the same instructions.. i know how to get to the IDE atapi place but the only thing in there is NVIDIA nforce controller.. no pirmary controllers or secondary
|
AfterDawn Addict
6 product reviews
|
24. July 2005 @ 16:40 |
Link to this message
|
AAAARRRGGG,
I posted all this once but had to log in again.
Quote:
the first 5 of the 100 worked
Very common with cmc mag and poor quality media.
Quote:
Disc Manufacturer: CMC MA - G. AF1
I got this from your last log so that media must be cmc mag too.
Quote:
=== Scsi-Device-Map ===
CdRomPeripheral : SCSI DVD-ROM 1.0 VClone Port 0 ID 0 DMA: Off
DiskPeripheral : WDC WD800BB-00FRA0 77.0 nvidesm Port 1 ID 0 DMA: Off
CdRomPeripheral : SONY DVD RW DW-D26A JYS2 nvidesm Port 1 ID 0 DMA: Off
CdRomPeripheral : SONY CDU4811 PY0A nvidesm Port 1 ID 1 DMA: Off
These all need to be on. Try this guide. http://dvdxcopy.afterdawn.com/thread_view.cfm/107928
Mort
Rig #1 Asus Rampage Formula Mobo, Intel Core2Quad Q9450 CPU @ 3.55ghz, 2gb Corsair DDR2 1066 Dominator Ram @ 5-5-5-15, TR Ultra 120 Extreme w/ Scythe 9 blade 110 cfm 120mm Fan HSF, HIS Radeon 512mb HD3850 IceQ TurboX GPU, Corsair 620HX P/S, CM Stacker 830 Evo Case, Rig #2 Asus P5W DH Deluxe Mobo, Intel C2D E6600 CPU @ 3.6ghz, 2gb Corsair XMS2 DDR2 800 Ram @ 4-4-4-12-2t, Zalman CNPS9500LED HSF, Sapphire Radeon X850XT PE GPU, Corsair 620HX P/S, Cooler Master Mystique Case, Viewsonic 20.1" Widescreen Digital LCD Monitor, Klipsch Promedia Ultra 5.1 THX Desktop Speakers, http://valid.x86-secret.com/show_oc.php?id=348351 http://valid.x86-secret.com/show_oc.php?id=236435 |
|
Advertisement
|
|
|
|
summerlov
Junior Member
|
24. July 2005 @ 16:48 |
Link to this message
|
|
ok the top part didnt work.. and i am not sure about the registry editing thing.. if my primary isnt where everyone says it should be wouldnt the editing be done wrong? and I can still copy on my +rw y is that and my 100 pack is tyog 2 or something like that.. the 10 pk is cnc..
|
|
