|
S-Video Cable
|
|
|
sean5775
Member
|
4. January 2005 @ 21:17 |
Link to this message
|
|
I have had problems when trying to connect up S-Video Cables for my home theatre system. I don't have any model numbers for my equipment but if it matters I can get them.
Whats happening is the picture only works in black and white while using the S-Video cables. whether I go through the reciever or not, and no matter what DVD player I use etc. I have played with settings on all the equipment and havent found anything to do with this.
I am now starting to think that my TV is the problem its the only common thing in all my situations. And yes I have tried several cables. Any suggestions would be greatly appreciated.
|
|
Advertisement
|
|
|
|
|
d-rock
Account closed as per user's own request
|
6. January 2005 @ 09:23 |
Link to this message
|
|
do you have this same problem when using composite video outputs? do you have another tv you could try your player on?
|
|
d-rock
Account closed as per user's own request
|
6. January 2005 @ 09:24 |
Link to this message
|
|
do you have this same problem when using composite video outputs? do you have another tv you could try your player on?
|
|
Razz1234
Suspended due to non-functional email address
|
10. January 2005 @ 23:54 |
Link to this message
|
|
Sean,
I have a strange problem using my S-video cable with my TV as well. I can not use "S-video" AND a "composet" cable at the same time. My TV seems to freak out and i get major disturbance. But, if i ONLY use s-video every thing is just fine.
Now that i have a reciever that convertes my composet to s-video, i only run an s-video to my TV and everything looks great.....
Try disconecting everything but the S-video cable and see what happens.
|
|
sean5775
Member
|
11. January 2005 @ 18:18 |
Link to this message
|
|
When I try this, the only wire from my reciever or DVD player to the tv is the S-Video cable. Even if I unhook everything and only hook the S-video to the TV it is still in black and white, I have tried 3 different DVD players, but I only have the one tv that has an S-Video input. The DVD player works fine with RCA cables or component video, Its too bad my reciever does not support component video. I guess the only surefire way to know if its the TV or not is to try another TV.
|
|
Razz1234
Suspended due to non-functional email address
|
12. January 2005 @ 08:14 |
Link to this message
|
|
yeah sean, i bet it's the TV.
I guess you'll just have to buy a new one!!!!!! lol
|
|
sean5775
Member
|
12. January 2005 @ 23:13 |
Link to this message
|
|
I was planning on a new one anyways, but no big rush, Im not gonna rush out and get a new TV just because of this.
|
Senior Member
1 product review
|
30. January 2005 @ 23:37 |
Link to this message
|
|
Before you do anything drastic, try a another s video cable to make sure that's not the problem. S video has two seperate signals(chrominance in luminance) so maybe part of the cable is tweaked. Good luck.
This message has been edited since posting. Last time this message was edited on 30. January 2005 @ 23:39
|
Senior Member
1 product review
|
30. January 2005 @ 23:38 |
Link to this message
|
|
!
This message has been edited since posting. Last time this message was edited on 30. January 2005 @ 23:38
|
|
GatlinGun
Member
|
3. February 2005 @ 14:18 |
Link to this message
|
|
Go inside your DVD player(menu) and select Super VHS. That should solve the problem.
|
Senior Member
1 product review
|
3. February 2005 @ 21:05 |
Link to this message
|
|
GatlinGun, what kind of a DVD player do you have?
|
|
Advertisement
|
|
|
|
dmarque
Newbie
|
5. February 2005 @ 04:14 |
Link to this message
|
|
Sean:
I am new to the DB and this is my first post. I read your posted issue and am certain I can help. The S-Video cables were a nice upgrade when they came out about 15 years ago. The attempt to provide better color separation came at a small cost however. The cost is convenience in hookup. They are effective and certainly enhance the quality of your picture over RCA connections.
As for addressing your problem. The MOST LIKELY solution is damage to one of the pins in one end of your S-Cable. If you take a magnifying glass and inspect each end you MIGHT see a bent pin. If it is not easily apparent that a pin is bent then it might be fatigue or a hairline crack.
Try to make sure the pins are straight.....When you insert each end into the component make very certain that the black key is lined up to go in properly to the component. DO NOT TWIST as you insert the cable. It is helpful to mark the outer shell with a white out marker line so you can see easily where the key end is when you are installing.
If after
1.Inspecting the pins and find them visibly OK.
2. Re-seating the cable to be sure they're in solid.
Try again with another S-Cable. I find that most retail dealers will replace S-Cables if you have a good relationship with them. See if they will do that for you. It often requires them to send yours back to the manufacturer for replacement.
I am certain that your problem rests with a cracked or bent pin. Again, if it is not visibly bent try another cable.
Respectfully,
Dmarque
This message has been edited since posting. Last time this message was edited on 5. February 2005 @ 04:57
|
