|
having trouble backing up the movie "the Grudge"
|
|
|
Sirlance
Newbie
|
26. January 2005 @ 05:34 |
Link to this message
|
|
I try using Anydvd, clonedvd 2, and decrypter to backup this movie. None of them work. Has anybody has the same problem? Please advice.
|
|
Advertisement
|
|
|
|
|
laddyboy
AfterDawn Addict
|
26. January 2005 @ 05:52 |
Link to this message
|
Not too many are going to have access since the title isn't released until this coming Tuesday. Are you using the newest versions of anydvd and DVD Decrypter? Anydvd posts frequent updates. The latest version of anydvd is 4.5.6.2, released on 1/23/05.
|
|
CTxpress
Junior Member
|
26. January 2005 @ 08:29 |
Link to this message
|
Sirlance
I just had The Grudge done last nite it came out perfect. CloneDVD2 wouldn't do it. But DVD Decrypter & DVDShrink would but I ran AnyDVD in the back ground. Might want to try that it might work for you also.
Good luck
Win some lose some
AMD3000+,XPSP2,BenQ DW 1655 LS-BenQ DW 1640(FormerSony DRU 810A) -2GB of ram , 250GB & 250GB HD. DVD Xcopy Xpress3.2.5.13,DVD Decrypter3.5.2.0,DVD Shrink3.2.0.15,Pinnacle Studio9.3.12,Ulead Movie Creator3,AnyDVD 4.5.6.2, CloneDVD 2.6.2.3 , Nero Ultra 7 , FabDVD
|
|
Shiseido
Suspended due to non-functional email address
|
28. January 2005 @ 14:47 |
Link to this message
|
I Rented A Copy yesterday, at first i tried ANYDVD VERSION 4.5.6.2 and DVD CLONE 5.1 No Luck,
Then i tried VOBBlanker 1.6 and DVDShrink,
After i Tried DVD Decrypter Then DVDShrink,Then VoBBlanker It Worked 100%.....Sayonara
In The Near Future - Corporate Networks Reach Out To The Stars, Electrons And Light Flow Throughout The Universe
The Advance Of Computerisation,However,Has Not Yet Wiped out Nations And Ethnic Groups,
|
AfterDawn Addict
|
28. January 2005 @ 15:09 |
Link to this message
|
I think we need to start a totally new Forum on "Backing up new releases"
It seems that every new movie that comes out there are hundreds of post about not being able to back it up? If you follow these instructions you will have no problem with backing up the Grudge or any other movie for that matter. It has not failed me yet.
1. Make sure you have the newest Version of Decrypter and Shrink first.
2. Rip only the Main movie in file mode with Decrypter
3. Open Shrink and hit "Re-Author"
4. Drag your main movie from the right window to the left.
5. Click on "Compression tab" and take out all the audio except for the 5.1 CH english.
6. Hit "Backup" and save as an ISO to your HD
7. Now burn the ISO with Decrypter or any other burning proggy you prefer.
If you need more detailed Instructions or like pictures you can use the first guide on my site here http://home.comcast.net/~bbmayo/index.html
If you have to continue to keep all the extra menus and crap you are going to keep running into problems not to mention you don't have as good of a quality movie because you had to compress the hell out of it to fit it on your DVD/R. I guess the choice is yours, but if you want a high quality back up without all the headaches then just do the main movie. :-)
My Guides--------->http://webpages.charter.net/bacitup/
Newbies------------>http://forums.afterdawn.com/thread_view.cfm/183136
Software ------->http://webpages.charter.net/bacitup/software.htmThis message has been edited since posting. Last time this message was edited on 28. January 2005 @ 15:10
|
|
Sirlance
Newbie
|
29. January 2005 @ 06:30 |
Link to this message
|
|
When you decrypt the"Grudge", what mode did you use (File or IFO)? This question is for "CTxpress".
thanks!
|
|
whirlble
Inactive
|
29. January 2005 @ 06:38 |
Link to this message
|
bravo! bbmayo and Shiseido. Those three programs do the trick. DVD Decrypter, DVD Shrink, and VoBBlanker work exceedingly well.
Coolmaster Wave
Antec Neopower 480w
P4 3.2ghz
Abit ic7,1g ddr400
WD sata 250g hd
BFG 6800ultra oc 256mb
Viewmaster VP912b 19"lcd
Sony dru 710a and Sony drx 320e.
|
Member
|
29. January 2005 @ 07:39 |
Link to this message
|
i do the same thing everytime. DVD Decrypter has the key to actually fix the security features of the new movies. all you need to do is let DVD Decrypter decrypt and let DVD Shrink turn it into a dvd 5, then its all up to you because at the end it doesn't even matter, had to fall to lose it all but in the end it doesn't even matter.
|
AfterDawn Addict
|
29. January 2005 @ 09:18 |
Link to this message
|
My Guides--------->http://webpages.charter.net/bacitup/
Newbies------------>http://forums.afterdawn.com/thread_view.cfm/183136
Software ------->http://webpages.charter.net/bacitup/software.htm
|
|
CTxpress
Junior Member
|
30. January 2005 @ 07:48 |
Link to this message
|
Hello Sirlance
When I backed up The Grudge, I used AnyDVD running in the back ground and use DVDshrink in regular mode not thing fancy. I can back entire movie with no problem.
This is just The Grudge we're are talking about here right?
Win some lose some
AMD3000+,XPSP2,BenQ DW 1655 LS-BenQ DW 1640(FormerSony DRU 810A) -2GB of ram , 250GB & 250GB HD. DVD Xcopy Xpress3.2.5.13,DVD Decrypter3.5.2.0,DVD Shrink3.2.0.15,Pinnacle Studio9.3.12,Ulead Movie Creator3,AnyDVD 4.5.6.2, CloneDVD 2.6.2.3 , Nero Ultra 7 , FabDVD
|
|
CTxpress
Junior Member
|
30. January 2005 @ 07:51 |
Link to this message
|
|
Sirlance
I used file mode in DVDDecrypter. it's ripping fine but for some reason I can't import it into DVDShrink. So I used the method above.
Win some lose some
AMD3000+,XPSP2,BenQ DW 1655 LS-BenQ DW 1640(FormerSony DRU 810A) -2GB of ram , 250GB & 250GB HD. DVD Xcopy Xpress3.2.5.13,DVD Decrypter3.5.2.0,DVD Shrink3.2.0.15,Pinnacle Studio9.3.12,Ulead Movie Creator3,AnyDVD 4.5.6.2, CloneDVD 2.6.2.3 , Nero Ultra 7 , FabDVD
|
|
dlc2000
Member
|
1. February 2005 @ 13:48 |
Link to this message
|
use the beta version of clonedvd2 2.7.2.1 . it can be found here http://club.cdfreaks.com/showthread.php?t=124366
i was getting the invalid file size error until i installed the beta version . i had no problems backing up the grudge with this version of clonedvd2 .
|
|
scottastr
Junior Member
|
1. February 2005 @ 14:27 |
Link to this message
|
|
|
|
jbm2451
Newbie
|
1. February 2005 @ 17:05 |
Link to this message
|
I used DVD Decrypter and DVD Shrink for The Grudge and Ray to back up the whole dvd.
In dycrypter click mode/read as an iso file. Save it to a folder.
After dycrypter does it's thing go back and set decrypter to mode/write/iso and close decrypter.
Then open DVD Shrink, click file/open iso image, select the iso image you just created with decrypter. Let shrink do the analyze then click on the folder that says unreferanced material. Then where it say compression "automatic" in the drop down to your right click on it and change it to still pictures.
Do this just for the unreferanced folder.
Uncheck the French language to get to 4300 MB or under then hit back up and burn with decrypter. Works all the time!
|
|
seadale
Member
|
1. February 2005 @ 18:37 |
Link to this message
|
i too cannot get decrept to do its thing. gets stuck at about sector 7. i tried following the above instructions. not sure where i'm going wrong. may i ask a stupid question: how do you set up AnyDVD to run in the background, i have the trial version, & i keep hearing you guys use this term, but don't no how to use it? thanks in advance!
|
Senior Member
|
1. February 2005 @ 20:42 |
Link to this message
|
|
The Grudge- tried backing it up today ,1st. attempt with DVD Shrink failled it locked during analyzing at about 25 percent. I started over with DVD decrypter 1st then DVD shrink then roxio /Creator Classic have the ISO. on hard drive & will burn to DVD-r shortly . So far so good . Don't expect anymore problems but will post if found . hope this info is helpfull - thanx to all for past.present & future help! Peace
This message has been edited since posting. Last time this message was edited on 2. February 2005 @ 17:02
|
|
laddyboy
AfterDawn Addict
|
2. February 2005 @ 02:54 |
Link to this message
|
seadale: AnyDVD is programmed to work in the background. It is among the first things that load during startup. You do not have to do anything. Once installed and you restart, it's ready to go unless you turn its features off.
|
|
ladyfae
Newbie
|
2. February 2005 @ 11:49 |
Link to this message
|
I copied the Grudge last night using DVD Decrypter and DVD Shrink. I had problems using DVD Shrink after 25 seconds of analyzing the software it frozed, but I used DVD Decrypter first then used DVD Shrink, then used decrypter again to burn the movie it came out perfect accept in the beginning I have to fast forward the movie for to it to begin. Can someone tell me what did I do wrong.
|
|
kzar
Newbie
|
2. February 2005 @ 12:37 |
Link to this message
|
Ok, here it is straight! I was able to finally backup "The Forgotten" and "The Grudge" after many hours of experimenting with different software. These are the programs that worked for me and if you don't have them then you need to download these programs or experiment with programs that you already have. 1) DVDXcopy Platinum RF (because of browser function). 2) DVD43 Version 2?. 3) Patin-Couffin. 4) AnyDVD v.4.5.7.1. 5) DVDdecrypter v. 3.5.2.0.
DVD43 and AnyDVD runs in the background of your computer so you don't have to start these programs after you boot up to your desktop. Note: DVD43 needs patin couffin to be installed for it to work. Also, Platinum RF kept giving me CSS errors with the AnyDVD software by itself so I had to combine it with DVD43. Use DVDdecrypter to rip the movie to your hard drive. After the movie is stored on your hard drive run DVDXcopy RF. Use the ADVANCE button and then BROWSE to the decrypted file. Then select all the tiltles, play with compression, and then burn the movie.
|
|
Shiseido
Suspended due to non-functional email address
|
2. February 2005 @ 14:06 |
Link to this message
|
I Read Somewhere That Columbia Tristar is snatching up the world's leading toughest CSS Protectors out there, making their movies, harder and harder to burn,
Originally i had trouble with Resident Evil 2 Apocalypse and The Forgotten and on Thursday night i rented The Grudge,
First I Used, DVDDecrypter VERSION 3.5.2.0 then VOBBLANKER VERSION 1.6.0.3, Finally
DVDSHRINK VERSION 3.2,In Conjuction with my AnyDVD & CloneDVD,
Having the latest Versions installed of these software installed is highly recommended, best of all most of them are free....
In The Near Future - Corporate Networks Reach Out To The Stars, Electrons And Light Flow Throughout The Universe
The Advance Of Computerisation,However,Has Not Yet Wiped out Nations And Ethnic Groups,
|
|
CKY_2084
Suspended due to non-functional email address
|
2. February 2005 @ 15:14 |
Link to this message
|
In my opinion again just MY OPINION, I think that AnyDVD is useless because I cant rip a lot of the newer movies just using AnyDVD and Shrink, But If I use Shrink and Decryptor it works everytime so Im taking AnyDVD off my system and it is the full version sorry to say. Anyways thanks BBMAYO because your site helped me out a lot! Later
|
|
TobyB
Newbie
|
2. February 2005 @ 20:17 |
Link to this message
|
|
bbmayo, thanks for the great site! One question for you-When do I just use shrink to get rid of stuff and when should I put it thru decryptor first. Seems like you get the same end result with 1/2 the time using just shrink first.
Thanks again for all the help
Toby
|
|
laddyboy
AfterDawn Addict
|
3. February 2005 @ 03:29 |
Link to this message
|
TobyB: DVD Shrink will fail with any of the new structural protection systems since it is no longer updated. DVD Decrypter does not fail since it's updated for the new schemes. You'll have to run Decrypter first and then Shrink in those cases.
|
Senior Member
|
3. February 2005 @ 07:55 |
Link to this message
|
Ditto what laddyboy said - does anyone know if they will ever update DVD Shrink? or bieng that DVD Decrypter was udpated for the new strategies is all this just a moot poinT? - Thanx to all -peace
|
|
Advertisement
|
|
|
AfterDawn Addict
|
3. February 2005 @ 08:04 |
Link to this message
|
|
Dito & Dito ^^^^ :-)
My guide just shows the surest way to get a good copy. Of course there are hundred's of other ways to do it, but I made those guides with the "Newbie" in mind. This is the most effective and cheapest way to back up your movies and get good quality. I have experimented with just about every proggy and way to do it and these are the easiest and safest. :-)
P.S. It dosent take any longer ripping with Decrypter first anyway. It has actually been found that this way is faster because Decrypter is much better at ripping any DVD not just the new ones. If you dont belive me time it your self from start to finish (I did) and I bet you will finish faster with my method. Here is why---
Ripping with Decrypter - Faster Than Shrink
Ripping only main Movie - Much faster than whole movie
When you open the files in Shrink it only takes Seconds to analize instead of minutes.
Shrink is working from your HD instead of DVD which we all know this is much faster..
My Guides--------->http://webpages.charter.net/bacitup/
Newbies------------>http://forums.afterdawn.com/thread_view.cfm/183136
Software ------->http://webpages.charter.net/bacitup/software.htm
This message has been edited since posting. Last time this message was edited on 3. February 2005 @ 08:09
|
