|
Replay Lite
|
|
Please note that the forum rules have changed. Posting of new codes is no longer allowed. See this thread for more information.
|
Member
|
22. April 2008 @ 08:33 |
Link to this message
|
Originally posted by SeanieG:
Originally posted by gman496:
Originally posted by SeanieG:
Anyone know where else (in Dublin) I could get the null modem cable other than Maplins? Told me in Blanch on Friday that they'd have them on Sat, then on Monday, then Tuesday and today they're not sure!
Thanks - and especially thanks to everyone who posts the codes and the flash update instructions.
Did you try Peats?
Hadn't thought of them - will try them on my way home today. Thanks gman.
If you cannot get one there, have a look at my earlier post here which may be of some help http://forums.afterdawn.com/thread_view.cfm/145/502990#3977182
|
|
Advertisement
|
|
|
|
|
Dylanman
Newbie
|
22. April 2008 @ 09:08 |
Link to this message
|
Originally posted by behaner:
Hey Dylanman, you have to manually assign the com ports if you are using a usb adapter (to either com1 or com2) windows automatically assigns it to port 10 you can change it by following gman's instructions below:
Originally posted by gman496:
Do the following.
START
Right Click "MY COMPUTER"
Choose "MANAGE"
In the resulting window, click on "DEVICE MANAGER"
In the right hand pane, click on the little plus sign beside "PORTS" in the right hand pane.
Right click on the USB Adapter (Should be something like "Prolific USB-to-Serial Comm Port (COM#)
Choose "Properties"
Click on "PORT SETTINGS" TAB
Click on "ADVANCED"
Then you will see the COM Port Number Box. You should be able to change it there using the drop down box.
Thanks a mil behaner will try that.Sorry for not getting back sooner but had problems with computer
|
Senior Member
|
22. April 2008 @ 09:19 |
Link to this message
|
Originally posted by gman496:
Hey Brian, How was the little break over the weekend lol ;-)
Now that things are a little quieter, you might get 913 for the PVR added to the Library?
Tis a wee bit early for Celtic to be floating lol
I will email it to Celt later and then it should be in the library.
Weekend break was great...No Brats with us...LOL
** This information is provided for educational purposes only. Misuse of the above is neither the responsibility of the author or the web host **
|
Junior Member
|
22. April 2008 @ 09:29 |
Link to this message
|
my pal got one in peats in parnell street (across from upc cinema) a few months ago if its any help... or maybe sony shop in o connell street if its handier
karlzips
|
Senior Member
|
22. April 2008 @ 10:11 |
Link to this message
|
hi brian i don't own a replay lite but a firend asked me to flash one I just want to check is it the 910 firmware i use is the one thats au. I did read your post on page 132 but i just want to confirm before i flash it.
Thanks
Antoinette
|
Senior Member
|
22. April 2008 @ 10:14 |
Link to this message
|
Originally posted by anto1969:
hi brian i don't own a replay lite but a firend asked me to flash one I just want to check is it the 910 firmware i use is the one thats au. I did read your post on page 132 but i just want to confirm before i flash it.
Thanks
Antoinette
Brian is not about yet Anto but YES it is 910 you need.
|
Senior Member
|
22. April 2008 @ 10:18 |
Link to this message
|
|
Thanks Gman i bump into you everywhere LOL :-)
|
Senior Member
|
22. April 2008 @ 10:21 |
Link to this message
|
Originally posted by anto1969:
Thanks Gman i bump into you everywhere LOL :-)
Sure we have to keep up to speed don't we? lol ;-)
|
Senior Member
|
22. April 2008 @ 10:46 |
Link to this message
|
Gman wondering if you can help Ive flashed the box with the firmware but do you see in brians post on 132 it says current key... ok autoupdate on exit to tv screen and wait when i press current key and ok im not getting the autoupdate on shown up on tv screen any ideas
GMAN IGNORE ABOVE POST I'M SORTED
THANKS
This message has been edited since posting. Last time this message was edited on 22. April 2008 @ 11:06
|
Senior Member
|
22. April 2008 @ 12:21 |
Link to this message
|
Originally posted by anto1969:
Gman wondering if you can help Ive flashed the box with the firmware but do you see in brians post on 132 it says current key... ok autoupdate on exit to tv screen and wait when i press current key and ok im not getting the autoupdate on shown up on tv screen any ideas
GMAN IGNORE ABOVE POST I'M SORTED
THANKS
We'll have to upgrade your title to "Multi tasking Engineering Technician" Anto lol ;-)
|
|
pegg4550
Newbie
|
22. April 2008 @ 13:21 |
Link to this message
|
ive decided to keep a copy of the channel list for future refrence lol do i need to have auto updates on or off?
|
|
debic
Member
|
22. April 2008 @ 13:28 |
Link to this message
|
hi guys
I HAVE A PROBLEM. I flashed a friends box for them got as far as putting the 742 on and got some message half way through about updating the stb clicked continue and now all i have is a box with red light stuck on, I can;t set up comm to transfer again. Any ideas. I did my mothers box and all went fine so i can't figure out what the problem is with this one.
thanks
debic
|
Senior Member
|
22. April 2008 @ 13:42 |
Link to this message
|
Originally posted by debic:
hi guys
I HAVE A PROBLEM. I flashed a friends box for them got as far as putting the 742 on and got some message half way through about updating the stb clicked continue and now all i have is a box with red light stuck on, I can;t set up comm to transfer again. Any ideas. I did my mothers box and all went fine so i can't figure out what the problem is with this one.
thanks
debic
Well hello there stranger.... Good to see you're still about Debi.
This is probably the result of removing the cable before the flash has fully completed. That's why we always emphysize that you wait for at least another minute after you see the fast blinking green to red light.
Anyway Debi, try this.
Connect the null modem lead to the box and your PC.
Click on the stblink5.20.zip file and choose run.
Do not do choose the setup comm.
And ignore any errors you see.
Remember UNTICK maintain user data.
Select upgrade software
Get the 742a file from your PC.
From when you see the blocks start to transfer.
It takes 4 mins for the box to be updated.
But make sure you see the led flashing much more quickly than it did when the blocks were transferring. If you leave for even 5 mins it will be OK.
Wait until all the blocks are transferred and WAIT a couple of more minutes for the led to flash much more rapidly than it did when you could visibly see when the blocks were transferring.
Unplug everything and only connect the power lead.
Wait for the led to flash red/green and then stay on green.
See if that gets you going & then flash again with the 910.
|
Senior Member
|
22. April 2008 @ 13:43 |
Link to this message
|
Originally posted by pegg4550:
ive decided to keep a copy of the channel list for future refrence lol do i need to have auto updates on or off?
Set it to "ON" Pegg.
|
|
pegg4550
Newbie
|
22. April 2008 @ 13:47 |
Link to this message
|
|
will do thanx
|
AfterDawn Addict
|
22. April 2008 @ 13:50 |
Link to this message
|
|
I knew my ears were burning for a reason :) , not long home from work and I will check my emails soon and do as requested lol :P
|
|
debic
Member
|
22. April 2008 @ 14:10 |
Link to this message
|
HI GMAN
Sorry i've been up to my eyes with the eurovoxs and my mind is gone blank from doing all these boxes. So anyway i managed to get the 742a on but couldn't set up comm to do the 910 so did the same as the method for the 742a and now its stuck on connecting but nothing is happening. After i reconnected the box after transferring the 742 i got a green light then it went to red again and i managed to switch it back on with the remote. All i have on the box is a continuous green light and connecting but as i said nothings happening. my mind is muddled with eurovox and replay instructions that i just can't think straight to sort it out and have lost all patience searching forums to find the answer. thanks for your help. Do you reckon i should disconnect the box even though it says connecting.
|
|
SeanieG
Newbie
|
22. April 2008 @ 14:13 |
Link to this message
|
Originally posted by SeanieG:
Originally posted by gman496:
Originally posted by SeanieG:
Anyone know where else (in Dublin) I could get the null modem cable other than Maplins? Told me in Blanch on Friday that they'd have them on Sat, then on Monday, then Tuesday and today they're not sure!
Thanks - and especially thanks to everyone who posts the codes and the flash update instructions.
Did you try Peats?
Hadn't thought of them - will try them on my way home today. Thanks gman.
Got the lead in Peats (?9.99) and have now updated the box. The instructions here are brilliant - everything now perfect! Thanks to everyone for the help especially Brian and Gman - you guys are just awesome...
|
|
jeffoo
Junior Member
|
22. April 2008 @ 14:14 |
Link to this message
|
|
hi everyone,(especially g'man novice and brian) just wanna say an absoulute huge thank you to everyone on the forum for all their help, managed to get lend of null modem cable today and have just flashed my box, WOOOO HOOOOOOOOOO COME ON THE REDS TONIGHT.......
|
Senior Member
|
22. April 2008 @ 14:26 |
Link to this message
|
Originally posted by debic:
HI GMAN
Sorry i've been up to my eyes with the eurovoxs and my mind is gone blank from doing all these boxes. So anyway i managed to get the 742a on but couldn't set up comm to do the 910 so did the same as the method for the 742a and now its stuck on connecting but nothing is happening. After i reconnected the box after transferring the 742 i got a green light then it went to red again and i managed to switch it back on with the remote. All i have on the box is a continuous green light and connecting but as i said nothings happening. my mind is muddled with eurovox and replay instructions that i just can't think straight to sort it out and have lost all patience searching forums to find the answer. thanks for your help. Do you reckon i should disconnect the box even though it says connecting.
EXIT STB LINK AND THEN UNPLUG THE BOX AND NULL MODEM LEAD.
POWER UP THE BOX AGAIN. THE LED WILL FLASH RED/GREEN.
WAIT UNTIL THE LED STAYS ON GREEN.
THEN RECONNECT NULL MODEM LEAD AND UPGRADE WITH 910
|
|
debic
Member
|
22. April 2008 @ 14:29 |
Link to this message
|
GMAN
i cancelled the download and then reconnected up again. now i'm able to make a connection and i selected the 910 sofware to put in and i've got the connecting box up again but nothing is happening again. the 742a definitely went in. the lights aren't flashing i've now got a constant green light. have you any ideas so i can get this damn thing out of my hair.
thanks
debic
ps hi to brian and novice also, how are you all doing.
|
Senior Member
|
22. April 2008 @ 14:33 |
Link to this message
|
Originally posted by debic:
GMAN
i cancelled the download and then reconnected up again. now i'm able to make a connection and i selected the 910 sofware to put in and i've got the connecting box up again but nothing is happening again. the 742a definitely went in. the lights aren't flashing i've now got a constant green light. have you any ideas so i can get this damn thing out of my hair.
thanks
debic
ps hi to brian and novice also, how are you all doing.
Can you power down again then hook up again but don't do the COM setup & do untick the maintain user data, then try the 910
|
|
debic
Member
|
22. April 2008 @ 14:39 |
Link to this message
|
gman
thankyou thankyou thankyou
its now transfering for me, so fingers crossed it'll come through for me. honestly my brain is gone to mush since this all started, i seem to remember everything about the eurovox and there's no room left in my little brain for the replay. much appreciated.
|
|
Elvis64
Junior Member
|
22. April 2008 @ 14:43 |
Link to this message
|
Hi all, nubbie here.
Are there any issues with updating a Replay Lite & Eurovox Box if they are clone boxes? And how do you know if they are clones?
Thanks in advance
|
|
Advertisement
|
|
|
Newbie
|
22. April 2008 @ 14:46 |
Link to this message
|
Alright lads,
I just got my null modem and adaptor leads
I tried to follow the instructions on page 132.
When I got to the stb link part all I got was "System cannot find the file specified" and "COMM Port open error"
Anyone know what Im doing wrong?
btw they have loads of null modem leads in Maplin Jervis st.
When I asked, the clerk new straight away what I was up to.
They have a big basket full right at the door
|
