|
Pioneer DVR-108 only burns at 4x
|
|
|
jaggrey
Newbie
|
17. February 2005 @ 06:10 |
Link to this message
|
|
When I 1st got this burner it gave the option to burn at 16x but EZ CD 6 would eventually slow it down to 2x while it was burning. After alot of experimenting I figured out it would burn at 8x all the way thru if selected.
Fine.
One day I started EZ CD 6 and it wouldn't start... instead the splash screen would come up and it would just hang. I uninstalled and reinstalled and ever since then the Pioneer won't burn DVDs any faster than 4x... it's the only selectable option. It's on UDMA Mode 5 or 4 and the other device on the same channel (Lite-ON CD Burner) is on UDMA Mode 4 or 2. Nothing new there.
I've also tried updating the firmware to no avail.
Any ideas?
This message has been edited since posting. Last time this message was edited on 17. February 2005 @ 06:16
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
|
17. February 2005 @ 08:36 |
Link to this message
|
hi the settings dont seem right?
does your devices look like this as its the top setting being 2 not 4/5 etc...
you can get 4/5 but thats in PIO mode...
Nothing here to see, move along folks.
 |
|
jaggrey
Newbie
|
17. February 2005 @ 08:55 |
Link to this message
|
|
I thought it said UDMA Mode 4 for the DVD burner but I'll check once I get home. I know for a fact it says UDMA and not PIO. Does it have to be UDMA Mode 2?
|
AfterDawn Addict
|
17. February 2005 @ 09:02 |
Link to this message
|
|
hi
yes i'm 99% sure also if you get consecutive errors via a drive it will slow down the dma, like keep knocking it down till its:
DMA 2 1 pio 4 3 2 1, 1 being bottom for compatibilty issues/error.
till the drive runs ok then it will stop there!
also is this the same with all software used?
is your apsi layer ok? you can test this in nero info tool
Nothing here to see, move along folks.
This message has been edited since posting. Last time this message was edited on 17. February 2005 @ 09:04
|
AfterDawn Addict
|
17. February 2005 @ 09:07 |
Link to this message
|
|
edit
This message has been edited since posting. Last time this message was edited on 17. February 2005 @ 09:15
|
AfterDawn Addict
|
17. February 2005 @ 09:10 |
Link to this message
|
|
hi
hursty what tool did you use to get the info?
mine as the pic are 2 and mine burns at 4.1x in 14 minutes
Nothing here to see, move along folks.
|
AfterDawn Addict
|
17. February 2005 @ 09:15 |
Link to this message
|
|
my mistake,i was thinking of plextor.
sorry
|
|
jaggrey
Newbie
|
17. February 2005 @ 16:19 |
Link to this message
|
Here we go. The top one is the DVD burner... the bottom is the CD burner.
This message has been edited since posting. Last time this message was edited on 17. February 2005 @ 16:23
|
|
jaggrey
Newbie
|
17. February 2005 @ 17:13 |
Link to this message
|
|
I just tried burning an ISO with CloneCD and it works at the normal 8x speed. So now I kno the problem is with EZ CD Creator.
|
AfterDawn Addict
|
17. February 2005 @ 21:27 |
Link to this message
|
|
hi
i stand corrected! the pioneer 108 does go to udma4 and also you know your app was the fault now...
thx...
Nothing here to see, move along folks.
|
|
jaggrey
Newbie
|
18. February 2005 @ 03:53 |
Link to this message
|
|
thanks for your help!
|
AfterDawn Addict
|
18. February 2005 @ 08:41 |
Link to this message
|
Quote:
i stand corrected! the pioneer 108 does go to udma4
i have pioneer 108,mines says dma2
???
|
|
jaggrey
Newbie
|
18. February 2005 @ 08:46 |
Link to this message
|
|
What speed does yours usually burn at?
|
AfterDawn Addict
|
18. February 2005 @ 09:06 |
Link to this message
|
|
hi
????????????????????
can hursty and jaggrey say if the bios is AUTO DETECT? or you set these yourselves? you will see this in device manager above the dma part mine is greyed out so i cant touch it! i have dma2
rip 20/25 mins
compress 20/25mins
burn 14/15 mins
are your eide cables 80 wires?
Nothing here to see, move along folks.
|
AfterDawn Addict
|
18. February 2005 @ 13:36 |
Link to this message
|
|
mine burns what speed i like,depending on media capabilitys of course.
mine is also greyed out as "auto detect"
i rip/compress at same time with shrink/anydvd.
so the average time to copy whole movie is approx 45 mins total.
burned at 2/4 speed
|
|
jaggrey
Newbie
|
18. February 2005 @ 13:44 |
Link to this message
|
I usually rip using DVD Shrink in about 25-30 mins depending on the movie. My Device Manager screenshot is above. I'm using 80 pin cables.
|
AfterDawn Addict
|
18. February 2005 @ 22:47 |
Link to this message
|
|
hi
i was searching all over the web yesterday and it seems the 108 is UDMA 4 , been trying to find a tool that shows dma capability for drives to no avail...
i wasnt sure if say you have 2 drives on one eide cable then they would both deafult to the slower speed???
Nothing here to see, move along folks.
|
AfterDawn Addict
|
19. February 2005 @ 02:45 |
Link to this message
|
|
did you know pioneer sub contract there burners elsewhere
???
mine is made by sony
says so on the paperwork
@rotary.how do you load the picture on AD?
i will show you my dma settings
with kind regards hursty
This message has been edited since posting. Last time this message was edited on 19. February 2005 @ 02:46
|
AfterDawn Addict
|
19. February 2005 @ 02:52 |
Link to this message
|
|
hi hurtsy...
for loading pictures the link tags are at the top of the box where you type your reply / message each time...
but you need to upload to a website first, i have 5 wannadoo accounts with 15 meg each, there free! go get one... also you dont use the wannadoo connection after you got the account delete connection options! also you will need an uploader app!
maybe easier to find a hosting website for pictures...
==========================
hursty...
have you treid uninstalling the drive and rebooting?
and then uninstalling the controller and rebooting? it should be udma4 (needed for 16x burning i think?)
you could email the pic to me?
Nothing here to see, move along folks.
|
AfterDawn Addict
|
19. February 2005 @ 03:41 |
Link to this message
|
This message has been edited since posting. Last time this message was edited on 19. February 2005 @ 03:46
|
AfterDawn Addict
|
19. February 2005 @ 04:17 |
Link to this message
|
|
i thought dma 5 is for your hardrive?
does it make any difference?whether dma 2/5?
i am reasonably happy with my rip/burn speed
about 45 mins total
with kind regards hursty
|
AfterDawn Addict
|
19. February 2005 @ 04:25 |
Link to this message
|
here it is,my other drive is in dma 2
hmmmm the picture didnt show up
This message has been edited since posting. Last time this message was edited on 19. February 2005 @ 04:26
|
AfterDawn Addict
|
19. February 2005 @ 04:30 |
Link to this message
|
|
cheers for the link jim
i have uploaded a image,how do i transfer it onto AD?
with regards.a stupid hursty
|
AfterDawn Addict
|
19. February 2005 @ 04:37 |
Link to this message
|
|
put the link in between this .....[ img ] [ / img ] ...without spaces
|
|
Advertisement
|
|
|
AfterDawn Addict
|
19. February 2005 @ 04:42 |
Link to this message
|
|
