|
|
|
could not perform end of disc-at-once
|
|
|
rathoriso
Suspended due to non-functional email address
|
8. March 2005 @ 05:42 |
Link to this message
|
I have Windows XP home and am using Nero v5.5.10.33 bundled. Never had any problems burning DVDs until now. Every time, I get an error at the end of the burn session saying could not perform end of disc-at-once. I can burn CDs with no problem and up until now have never had problems with DVDs. After 100%, it takes a long time doing Quote:
lead out
, then it fails...any suggestions???? I'm making data discs and not DVD videos.
|
|
Advertisement
|
 |
|
|
|
rathoriso
Suspended due to non-functional email address
|
8. March 2005 @ 05:51 |
Link to this message
|
Let me add my log to this if that's helpful to anyone who can be helpful
Quote:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:03:20 AM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 1/29/2003 3:37:36 PM
Nero Version: 5.5.10.33
Recorder: <DVDRW IDE1004> Version: 0039 - HA 3 TA 0 - 5.5.10.33
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <DVDRW IDE1004> Version: 0039 - HA 3 TA 0 - 5.5.10.33
Adapter driver: <atapi> HA 3
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 2B020H1 atapi Port 0 ID 0 DMA: On
DiskPeripheral : MAXTOR 4K080H4 atapi Port 0 ID 1 DMA: On
DiskPeripheral : Maxtor 6Y200M0 atapi Port 2 ID 0 DMA: On
CdRomPeripheral : DVDRW IDE1004 atapi Port 3 ID 0 DMA: Off
CdRomPeripheral : AOPEN CD-RW CRW2440 atapi Port 3 ID 1 DMA: On
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 1022MB (1047280kB)
Free physical memory: 645MB (660660kB)
Memory in use : 36 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: On
8.3.2005
ISO compilation
7:37:22 AM #1 Text 0 File Isodoc.cpp, Line 7576
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
7:37:23 AM #2 Text 0 File Reader.cpp, Line 115
Reader running
7:37:23 AM #3 Text 0 File Writer.cpp, Line 125
Writer DVDRW IDE1004 running
7:37:23 AM #4 ISO9660GEN -11 File geniso.cpp, Line 4571
First writeable address = 0 (0x00000000)
7:37:23 AM #5 Text 0 File Burncd.cpp, Line 3737
Turn on Disc-At-Once, using DVD media
7:37:23 AM #6 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 2257376 (2257376) = #2257376/501:38.26
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------
7:37:24 AM #7 Text 0 File DlgWaitCD.cpp, Line 222
Last possible write address on media: 2295103 (510:01.28)
Last address to be written: 2257375 (501:38.25)
7:37:24 AM #8 Text 0 File DlgWaitCD.cpp, Line 227
Write in overburning mode: FALSE
7:37:24 AM #9 Text 0 File DlgWaitCD.cpp, Line 1679
Recorder: DVDRW IDE1004, Media type: DVD+R
Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
7:37:30 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder DVDRW IDE1004 for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD not fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 328445952
7:37:30 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 2257376 (2257376) = #2257376/501:38.26
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2257376 blocks [DVDRW IDE1004 ]
--------------------------------------------------------------
7:37:30 AM #12 Phase 24 File dlgbrnst.cpp, Line 1655
Caching of files started
7:37:31 AM #13 Phase 25 File dlgbrnst.cpp, Line 1655
Caching of files completed
7:37:31 AM #14 Phase 36 File dlgbrnst.cpp, Line 1655
Burn process started at 2.4x (3,312 KB/s)
7:37:31 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
7:37:31 AM #16 Text 0 File Cdrdrv.cpp, Line 7877
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 03 59 55 44 45 4E 30 - 30 30 54 30 32 00 38 23 ..YUDEN000T02.8#
54 37 10 02 4E 72 02 8C - 63 16 16 0B 0B 0A 0A 01 T7..Nr..c.......
19 1B 0C 0C 0C 0D 01 00 - 00 00 00 00 00 00 00 01 ................
7:37:31 AM #17 Text 0 File DVDPlusRW.cpp, Line 438
Start write address at LBA 0
DVD high compatibility mode: Yes
8:37:29 AM #18 Text 0 File WriterStatus.cpp, Line 115
<DVDRW IDE1004 > start writing Lead-Out at LBA 2257376 (2271E0h), lenght 0 blocks
8:37:30 AM #19 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion
8:47:31 AM #20 SCSI -1169 File Cdrdrv.cpp, Line 1212
SCSI Exec, HA 3, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08
8:51:31 AM #21 CDR -1175 File Cdrdrv.cpp, Line 1271
Internal trace
Resending of command failed after 240000ms
CDB Data[hex]: 5B 01 02 00 00 FF 00 00 00 00 00 00
8:51:31 AM #22 SCSI -1169 File Cdrdrv.cpp, Line 1272
SCSI Exec, HA 3, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0xFF 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08
8:53:14 AM #23 CDR -1169 File ThreadedTransferInterface.cpp, Line 1468
Logical unit not ready, operation in progress
8:53:14 AM #24 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1468
Could not perform end of Disc-At-Once
8:53:14 AM #25 Phase 38 File dlgbrnst.cpp, Line 1655
Burn process failed at 2.4x (3,312 KB/s)
8:53:14 AM #26 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/17/2002 8:05:10 AM
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 5:02:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Any help would be greatly appreciated...Thanx
|
AfterDawn Addict
|
8. March 2005 @ 07:27 |
Link to this message
|
This lookk like a problem
Quote:
CdRomPeripheral : DVDRW IDE1004 atapi Port 3 ID 0 DMA: Off
Try turning the DMA on for your writer.. If you are not sure how to do this there is a guide at my site link is in my signature..
My Guides--------->http://webpages.charter.net/bacitup/
Newbies------------>http://forums.afterdawn.com/thread_view.cfm/183136
Software ------->http://webpages.charter.net/bacitup/software.htm |
|
rathoriso
Suspended due to non-functional email address
|
8. March 2005 @ 10:39 |
Link to this message
|
|
Thanks for the tip, bbmayo. I followed instructions, turned on DMA and still having same problem at the end of the burn session...
Any other ideas??
|
|
rathoriso
Suspended due to non-functional email address
|
8. March 2005 @ 10:44 |
Link to this message
|
Here is the log from the last failure:
Quote:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:03:20 AM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 1/29/2003 3:37:36 PM
Nero Version: 5.5.10.33
Recorder: <DVDRW IDE1004> Version: 0039 - HA 3 TA 0 - 5.5.10.33
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <DVDRW IDE1004> Version: 0039 - HA 3 TA 0 - 5.5.10.33
Adapter driver: <atapi> HA 3
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 2B020H1 atapi Port 0 ID 0 DMA: On
DiskPeripheral : MAXTOR 4K080H4 atapi Port 0 ID 1 DMA: On
DiskPeripheral : Maxtor 6Y200M0 atapi Port 2 ID 0 DMA: On
CdRomPeripheral : DVDRW IDE1004 atapi Port 3 ID 0 DMA: On
CdRomPeripheral : AOPEN CD-RW CRW2440 atapi Port 3 ID 1 DMA: On
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 1022MB (1047280kB)
Free physical memory: 665MB (681080kB)
Memory in use : 34 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: On
8.3.2005
ISO compilation
2:00:48 PM #1 Text 0 File Isodoc.cpp, Line 7576
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
2:00:48 PM #2 Text 0 File Reader.cpp, Line 115
Reader running
2:00:48 PM #3 Text 0 File Writer.cpp, Line 125
Writer DVDRW IDE1004 running
2:00:48 PM #4 ISO9660GEN -11 File geniso.cpp, Line 4571
First writeable address = 0 (0x00000000)
2:00:48 PM #5 Text 0 File Burncd.cpp, Line 3737
Turn on Disc-At-Once, using DVD media
2:00:48 PM #6 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 2260400 (2260400) = #2260400/502:18.50
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------
2:00:49 PM #7 Text 0 File DlgWaitCD.cpp, Line 222
Last possible write address on media: 2295103 (510:01.28)
Last address to be written: 2260399 (502:18.49)
2:00:49 PM #8 Text 0 File DlgWaitCD.cpp, Line 227
Write in overburning mode: FALSE
2:00:49 PM #9 Text 0 File DlgWaitCD.cpp, Line 1679
Recorder: DVDRW IDE1004, Media type: DVD+R
Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
2:00:54 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder DVDRW IDE1004 for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD not fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 334639104
2:00:54 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 2260400 (2260400) = #2260400/502:18.50
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2260400 blocks [DVDRW IDE1004 ]
--------------------------------------------------------------
2:00:54 PM #12 Phase 24 File dlgbrnst.cpp, Line 1655
Caching of files started
2:00:54 PM #13 Phase 25 File dlgbrnst.cpp, Line 1655
Caching of files completed
2:00:54 PM #14 Phase 36 File dlgbrnst.cpp, Line 1655
Burn process started at 2.4x (3,312 KB/s)
2:00:54 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
2:00:54 PM #16 Text 0 File Cdrdrv.cpp, Line 7877
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 03 59 55 44 45 4E 30 - 30 30 54 30 32 00 38 23 ..YUDEN000T02.8#
54 37 10 02 4E 72 02 8C - 63 16 16 0B 0B 0A 0A 01 T7..Nr..c.......
19 1B 0C 0C 0C 0D 01 00 - 00 00 00 00 00 00 00 01 ................
2:00:54 PM #17 Text 0 File DVDPlusRW.cpp, Line 438
Start write address at LBA 0
DVD high compatibility mode: Yes
3:07:46 PM #18 Text 0 File WriterStatus.cpp, Line 115
<DVDRW IDE1004 > start writing Lead-Out at LBA 2260400 (227DB0h), lenght 0 blocks
3:07:46 PM #19 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion
3:17:47 PM #20 SCSI -1169 File Cdrdrv.cpp, Line 1212
SCSI Exec, HA 3, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08
3:21:47 PM #21 CDR -1175 File Cdrdrv.cpp, Line 1271
Internal trace
Resending of command failed after 240000ms
CDB Data[hex]: 5B 01 02 00 00 FF 00 00 00 00 00 00
3:21:47 PM #22 SCSI -1169 File Cdrdrv.cpp, Line 1272
SCSI Exec, HA 3, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0xFF 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08
3:22:52 PM #23 CDR -1169 File ThreadedTransferInterface.cpp, Line 1468
Logical unit not ready, operation in progress
3:22:52 PM #24 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1468
Could not perform end of Disc-At-Once
3:22:52 PM #25 Phase 38 File dlgbrnst.cpp, Line 1655
Burn process failed at 2.4x (3,312 KB/s)
3:22:52 PM #26 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/17/2002 8:05:10 AM
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 5:02:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
rathoriso
Suspended due to non-functional email address
|
8. March 2005 @ 18:05 |
Link to this message
|
I don't know if it's my firmware (I have a DVDRW IDE1004 firmware version 0039...I know it's old but it worked fine until now) or if it's aspi installation corrupted (Nero InfoTool tells me my aspi installation is corrupted) or what?
I keep getting the could not perform disc-at-once error in Nero 5.5 and the finalization process in DVD X Copy takes 4EVER.
I want to upgrade my firmware, but will this solve my issue? I don't want to make things worse...
Any help would be appreciated
thanx
|
Moderator
|
8. March 2005 @ 19:24 |
Link to this message
|
Here's things you can try.
download ForceASPI 1.8 and ASPI Check
Check your PM for that
When you've unzipped, run KILLASPI then run INSTASPI ... reboot and run aspi check. All dll's should read 4.71.2
Then run Nero InfoTool and see if it says aspi layer installed correctly.
Try to burn. If it still doesn't work, uninstall Nero. Use Nero's clean tools then download the trial version of Nero 6
http://ww2.nero.com/us/Clean_Tools.html
This message has been edited since posting. Last time this message was edited on 8. March 2005 @ 19:24
|
|
rathoriso
Suspended due to non-functional email address
|
8. March 2005 @ 19:32 |
Link to this message
|
|
Are these suggestions preferred over upgrading my firmware?? In other words...should this be done in conjunction with a firmware upgrade or instead of a firmware upgrade? Keeping in mind that I've had many successful burns with my current firmware previously.
|
Moderator
|
8. March 2005 @ 19:35 |
Link to this message
|
I would try those before a firmware update, especially since you don't know which one to get :)
If all of those fail (ie. install a "working" aspi layer, tried the newer Nero 6), then yes next step would be to update your firmware.
|
|
Advertisement
|
|
|
|
rathoriso
Suspended due to non-functional email address
|
8. March 2005 @ 20:10 |
Link to this message
|
Okay, I've done the aspi cleanup business...with success. Nero InfoTool likes me again. The only thing that worries me is the fact that my write speed for my DVDRW drive in InfoTool is 1X.
I'm burning a disc right now in Nero. The default speed for Nero, however, is 2.4...go figure. Hopefully this works...
If not, I'm going to try Nero v6.x (your link).
Do you think this aspi fix could solve my problem with DVD X Copy's extra long extended finalization issues?
Otherwise, I need about an hour or so for this DVD to burn...fingers crossed:|
|
|
