|
Chip Installation (Viper GC)
|
|
|
antsmalls
Member
|
16. March 2005 @ 10:07 |
Link to this message
|
|
Any sites installating the chip, I tried, it's to complex
|
|
Advertisement
|
 |
|
|
|
jamjars
Newbie
|
16. March 2005 @ 15:42 |
Link to this message
|
|
i did mine yesterday and if you are competent at soldering or even like me who is just ok at it u should be right. i just cove the area around it with electrical tap or blu-tac so i can only see the one spot i need to solder.worked first time too!
|
|
antsmalls
Member
|
17. March 2005 @ 04:23 |
Link to this message
|
|
I was told that the gamecube is difficult to solder because the area is tiny, and if you move the heatsink the wrong way, when you could destroy the motherboard
|
|
indienemo
Account closed as per user's own request
|
18. March 2005 @ 02:16 |
Link to this message
|
|
Its easy really, and ive never soldered before in my life...works fine
"Life is like a box of chocolates, whenever it comes to me all that is left is toffee logs" - Me.
------------------------------------------------------
PC: Athlon 64 X2 4200+ @ 2.4Ghz, 2GB DDR2, X850 PE GFX.
GC: Viper GC w. Cobra bios 1.2
X360: Kreon 1.0 Drive, Softmodded console
 |
|
Zeezan
Newbie
|
19. March 2005 @ 10:29 |
Link to this message
|
|
Could somebody post a link to a website that has installation guide for this please.
|
|
gulliver
Member
|
19. March 2005 @ 10:47 |
Link to this message
|
it's really not that complicated. the points on the board are pretty small, but that's the hardest part. and only two of the wires are difficult. but like jamjars said, just use electrical tape. and the heatsink isn't a problem at all. just pop it off with a flathead and don't slide it around too much. lift it straight up.
here's a link to brakken faq. it'll tell you all you need to know to install plus everything else you need to know: http://forums.maxconsole.com/showthread.php?s=&threadid=4184
mrunix, bring forth your golden gamecube and deliver us to the promised land.
My Gamecube: ViperGC with Cobra 1.0
My PS2: flip top (clear green) and swap magic 3.3
My laptop: AMD Athlon 64 3000+ w/512RAM, 60gig HD
My desktop: AMD Athl
|
|
indienemo
Account closed as per user's own request
|
19. March 2005 @ 11:12 |
Link to this message
|
|
if you heat it up with a hairdryer it pulls straight off
"Life is like a box of chocolates, whenever it comes to me all that is left is toffee logs" - Me.
------------------------------------------------------
PC: Athlon 64 X2 4200+ @ 2.4Ghz, 2GB DDR2, X850 PE GFX.
GC: Viper GC w. Cobra bios 1.2
X360: Kreon 1.0 Drive, Softmodded console
|
|
molton
Junior Member
|
19. March 2005 @ 12:41 |
Link to this message
|
|
yeah, I'd really recommend the hair dryer for getting the heatsink off, I got that thing pretty damn hot and I still had to slide it back and forth to get it off, if you just try to pull it off you'll probably break it if you're gamecube's like mine.
Also the soldering isn't that tough, just make sure you use a multimeter with a continuity setting to test your connections and make sure you didn't make any unwanted connections, if you did, put a knife between the two points and melt the solder on both sides of it while pressing down a little, that should seperate it.
This message has been edited since posting. Last time this message was edited on 19. March 2005 @ 12:42
|
|
gulliver
Member
|
20. March 2005 @ 17:17 |
Link to this message
|
|
All I had to do was loosen it a little with a screwdriver and it came off really easy.
mrunix, bring forth your golden gamecube and deliver us to the promised land.
My Gamecube: ViperGC with Cobra 1.0
My PS2: flip top (clear green) and swap magic 3.3
My laptop: AMD Athlon 64 3000+ w/512RAM, 60gig HD
My desktop: AMD Athl
|
|
indienemo
Account closed as per user's own request
|
20. March 2005 @ 23:57 |
Link to this message
|
|
Yeah good method..
"Life is like a box of chocolates, whenever it comes to me all that is left is toffee logs" - Me.
------------------------------------------------------
PC: Athlon 64 X2 4200+ @ 2.4Ghz, 2GB DDR2, X850 PE GFX.
GC: Viper GC w. Cobra bios 1.2
X360: Kreon 1.0 Drive, Softmodded console
|
|
gulliver
Member
|
21. March 2005 @ 04:55 |
Link to this message
|
|
ok smartass, just because you needed a hairdryer doesn't mean everyone else does. It's a perfectly good method. Even brakken says it's the easiest way to do it in his faq. So why don't you read up a little before you judge peoples methods.
mrunix, bring forth your golden gamecube and deliver us to the promised land.
My Gamecube: ViperGC with Cobra 1.0
My PS2: flip top (clear green) and swap magic 3.3
My laptop: AMD Athlon 64 3000+ w/512RAM, 60gig HD
My desktop: AMD Athl
|
|
indienemo
Account closed as per user's own request
|
21. March 2005 @ 05:43 |
Link to this message
|
|
who was that aimed at?
"Life is like a box of chocolates, whenever it comes to me all that is left is toffee logs" - Me.
------------------------------------------------------
PC: Athlon 64 X2 4200+ @ 2.4Ghz, 2GB DDR2, X850 PE GFX.
GC: Viper GC w. Cobra bios 1.2
X360: Kreon 1.0 Drive, Softmodded console
|
|
gulliver
Member
|
21. March 2005 @ 09:21 |
Link to this message
|
that was aimed at you and your sarcasm.
Quote:
Yeah good method..
At least it sounded sarcastic to me. If it wasn't, then my bad.
mrunix, bring forth your golden gamecube and deliver us to the promised land.
My Gamecube: ViperGC with Cobra 1.0
My PS2: flip top (clear green) and swap magic 3.3
My laptop: AMD Athlon 64 3000+ w/512RAM, 60gig HD
My desktop: AMD Athl
This message has been edited since posting. Last time this message was edited on 21. March 2005 @ 09:23
|
|
indienemo
Account closed as per user's own request
|
21. March 2005 @ 23:04 |
Link to this message
|
|
It wasnt sarcasm fool, the hairdryer method is fantastic and it was me who brought it up in this thread in the first place, why would i big up a method firstly then suddently diss it?
"Life is like a box of chocolates, whenever it comes to me all that is left is toffee logs" - Me.
------------------------------------------------------
PC: Athlon 64 X2 4200+ @ 2.4Ghz, 2GB DDR2, X850 PE GFX.
GC: Viper GC w. Cobra bios 1.2
X360: Kreon 1.0 Drive, Softmodded console
|
|
gulliver
Member
|
22. March 2005 @ 06:51 |
Link to this message
|
|
no man, I'm talking about my screwdriver method. Right after I mentioned it you said "yeah, good method..." and it sounded sarcastic to me. You didn't quote anyone and it was right after my comment so I figured you were talking to me.
It's the ".." that made it sound sarcastic. I'm an english major and I read into everything written:)
mrunix, bring forth your golden gamecube and deliver us to the promised land.
My Gamecube: ViperGC with Cobra 1.0
My PS2: flip top (clear green) and swap magic 3.3
My laptop: AMD Athlon 64 3000+ w/512RAM, 60gig HD
My desktop: AMD Athl
This message has been edited since posting. Last time this message was edited on 22. March 2005 @ 06:52
|
|
indienemo
Account closed as per user's own request
|
22. March 2005 @ 09:20 |
Link to this message
|
|
I see ;)
Well good for you..
.....NOT SARCASTIC!! :D
"Life is like a box of chocolates, whenever it comes to me all that is left is toffee logs" - Me.
------------------------------------------------------
PC: Athlon 64 X2 4200+ @ 2.4Ghz, 2GB DDR2, X850 PE GFX.
GC: Viper GC w. Cobra bios 1.2
X360: Kreon 1.0 Drive, Softmodded console
|
|
Advertisement
|
|
|
|
gulliver
Member
|
22. March 2005 @ 20:57 |
Link to this message
|
|
cool cool, I think I'm just a little paranoid lately;)
mrunix, bring forth your golden gamecube and deliver us to the promised land.
My Gamecube: ViperGC with Cobra 1.0
My PS2: flip top (clear green) and swap magic 3.3
My laptop: AMD Athlon 64 3000+ w/512RAM, 60gig HD
My desktop: AMD Athl
|
