|
|
|
problem burning to printable discs
|
|
|
cuzzer
Newbie
|
7. April 2005 @ 15:31 |
Link to this message
|
|
i have just brought a pioner109 duellayer.to replace my sony
however when i try to burn with nero i keep getting error messages...cannot perform end of disk at once. or burn failed.i never had this problem before. i am useing dvd shrink 3.2 and nero 6... the disks i am useing are datawrite dvd-r 8speed, and datawrite titanium 8speed,...however if i use a datawrite non printable disk it burns ok..please help
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
7. April 2005 @ 16:04 |
Link to this message
|
I have just begun using printable media. Having read many threads about the problems of printable media,I have chosen verbatim +8x full hub printable and they are working great.
Does any actual burn take place on those data-write printables?
A firmware update may be needed for your burner.
I am not sure of what you are trying to backup,so please tell us what you are trying to backup,process you are using,and all programs you are using for this backup.
A Nero error burn report would also help out,please edit out your serial #- Starts out as 1A20-xxxx-xxxx-xxxx-xxxx-xxxx
HP a1118x-b/athlon 64-3300+/BenQ 1650 BCDC/LG 8163B/Modded Wii/Epson-R300 and Ty Watershields!!! |
|
cuzzer
Newbie
|
7. April 2005 @ 18:26 |
Link to this message
|
|
yes when the error message comes up the disk is no good, always happens at 1% of burn process, i am copying dvd films, after useing DVD SHRINK 3.2.
i updated my firmware when i installed my writer.
This message has been edited since posting. Last time this message was edited on 7. April 2005 @ 18:49
|
|
cuzzer
Newbie
|
8. April 2005 @ 04:50 |
Link to this message
|
|
1A21
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=30208 bytes, created 11/06/1997 19:01:02
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:34
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <PIONEER DVD-RW DVR-109> Version: 1.40 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <PIONEER DVD-RW DVR-109 >Version: 1.40 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y160P0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : IC35L040AVVA07-0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-109 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LG CD-RW CED-8080B atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-109 F: CDRom0
LG CD-RW CED-8080B E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 205MB (210540kB)
Memory in use : 59 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
5.4.2005
UDF/ISO compilation
18:26:22 #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
18:26:22 #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
18:26:22 #3 Text 0 File Isodoc.cpp, Line 6172
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
18:26:22 #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
18:26:23 #5 Text 0 File Reader.cpp, Line 127
Reader running
18:26:23 #6 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-109 running
18:26:23 #7 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
18:26:23 #8 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
18:26:23 #9 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media
18:26:23 #10 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2274879 (505:31.54, 4443MB)
18:26:23 #11 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)
18:26:23 #12 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: PIONEER DVD-RW DVR-109, Media type: DVD-R
Disc Manufacturer: SKC Co - .,Ltd.
Disc Application Code: 64, Disc Physical Code: 193
18:26:23 #13 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================
18:26:23 #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2274880 (2274880) = #2274880/505:31.55
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2274880 blocks [PIONEER DVD-RW DVR-109]
--------------------------------------------------------------
18:26:23 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [PIONEER DVD-RW DVR-109] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4658954240, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2274880 | lead-out | 1 | 0x41 | 0x00
18:26:23 #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
18:26:23 #17 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.
18:26:23 #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
18:26:23 #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
18:26:23 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
18:26:23 #21 Text 0 File DVDR.cpp, Line 2194
Recording mode: Sequential Recording Mode for Multisession
18:26:23 #22 Text 0 File Mmc.cpp, Line 21235
Set BUFE: Buffer underrun protection -> ON
18:26:23 #23 Text 0 File DVDR.cpp, Line 2340
Start write address at LBA 0
DVD high compatibility mode: No
18:26:23 #24 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
18:26:25 #25 Text 0 File Cdrdrv.cpp, Line 1287
18:26:25.855 - PIONEER DVD-RW DVR-109\H1 T0 : Queue again later
18:26:48 #26 SCSI -1128 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x09B20000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0xFF 0xFF 0x04 0x50 0x0E
0x00 0x00 0x00 0x00 0x11 0x05
18:26:48 #27 CDR -1128 File Writer.cpp, Line 311
Unrecoverable read error
18:26:48 #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
18:26:49 #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
18:26:49 #30 Text 0 File DVDR.cpp, Line 2603
EndDAO: Last written address was 767
18:26:49 #31 Phase 133 File dlgbrnst.cpp, Line 1832
Writing short lead-out
18:26:49 #32 SCSI -1176 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x03 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x72 0x04
18:26:49 #33 CDR -1176 File WriterStatus.cpp, Line 167
Session fixation error
18:26:49 #34 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
18:26:49 #35 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 05:59:42 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
AfterDawn Addict
|
8. April 2005 @ 08:19 |
Link to this message
|
Datawrite Classic Grey DVD-R 4x (PRODISC S03)
Datawrite Classic Grey DVD-R 8x (FUJIFILM03)
Datawrite Classic Grey DVD-R 8x (Prodisc F01)
Datawrite Classic Red DVD-R 4x (PRINCO......)
Datawrite Classic Titanium DVD+R 8x (CMC MAG. AE1)
Datawrite Classic Yellow DVD+R 8x (MCC 003)
Datawrite Classic Yellow DVD+R 8x (PRODISC R03) Rev03
Datawrite Classic Yellow DVD-R 1x (PRINCO......)
Datawrite Classic Yellow DVD-R 4x (PRINCO......)
Datawrite DVD+R 2.4X (PRODISC R01)
Datawrite DVD+RW ?x (PRODISC W01)
Datawrite DVD-R 4x (RITEKG04....)
Datawrite DVD-R 8x Printable (CMC MAG AE1)
Datawrite DVD-RW 2x (PRINCO......)
Datawrite Red (V2) DVD-R 4x (AN31........)
Datawrite Red (V2) DVD-R 4x (INFOSMART01.)
That's some of the mfg codes for datawrite media.
Your's is: Disc Manufacturer: SKC Co - .,Ltd.
Very suspicious on the quality of that code.I couldn't even locate that code on any of dogbomb's list of media codes.
Last address to be written: 2274879 (505:31.54, 4443MB)
Reduce your backup target in dvd shrink:Open up dvd shrink/
Edit/preferences/click on DVD-5 and scroll till you get to custom,click and then set the target to anywhere from 4300-4360 mbs/OK.
Also reduce your burn speed to see if you can get these to burn.You may also want to try to burn with DVD Decrypter and see if that program will burn them.
Good Luck.
HP a1118x-b/athlon 64-3300+/BenQ 1650 BCDC/LG 8163B/Modded Wii/Epson-R300 and Ty Watershields!!!
|
|
cuzzer
Newbie
|
8. April 2005 @ 09:25 |
Link to this message
|
|
cheers, i will try it,
|
|
cuzzer
Newbie
|
12. April 2005 @ 07:30 |
Link to this message
|
|
i have set my target as 4360 mbs, and tryed burning at 2 speed/4 speed and still it failed. i opened a new pack of discs and it burned straight away. however i tryed to burn the same project again but it failed both times.
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=30208 bytes, created
11/06/1997 19:01:02
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll':
Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:34
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <PIONEER DVD-RW DVR-109> Version: 1.40 - HA 1 TA 0 -
6.6.0.8
Adapter driver: <atapi> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <PIONEER DVD-RW DVR-109 >Version: 1.40 - HA 1 TA 0 -
6.6.0.8
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y160P0 atapi Port 0 ID 0
DMA: On
DiskPeripheral : IC35L040AVVA07-0 atapi Port 0 ID 1
DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-109 atapi Port 1 ID 0
DMA: On
CdRomPeripheral : LG CD-RW CED-8080B atapi Port 1 ID 1
DMA: On
=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-109 F: CDRom0
LG CD-RW CED-8080B E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 199MB (203996kB)
Memory in use : 61 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
12.4.2005
UDF/ISO compilation
12:35:43 #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
12:35:43 #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
12:35:43 #3 Text 0 File Isodoc.cpp, Line 6172
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
12:35:43 #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
12:35:43 #5 Text 0 File Reader.cpp, Line 127
Reader running
12:35:43 #6 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-109 running
12:35:43 #7 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
12:35:43 #8 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
12:35:43 #9 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media
12:35:43 #10 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2232863 (496:11.38, 4361MB)
12:35:43 #11 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)
12:35:43 #12 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: PIONEER DVD-RW DVR-109, Media type: DVD-R
Disc Manufacturer: SKC Co - .,Ltd.
Disc Application Code: 64, Disc Physical Code: 193
12:35:43 #13 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:35:43 #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2232864 (2232864) = #2232864/496:11.39
relocatable, disc pos for caching/writing not required/ required, no
patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length
2232864 blocks [PIONEER DVD-RW DVR-109]
--------------------------------------------------------------
12:35:43 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [PIONEER DVD-RW DVR-109] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0
4572905472, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2232864 | lead-out | 1 | 0x41 | 0x00
12:35:43 #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
12:35:44 #17 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.
12:35:44 #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
12:35:44 #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
12:35:44 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos,
orig at #0): write at #0
12:35:44 #21 Text 0 File DVDR.cpp, Line 2194
Recording mode: Sequential Recording Mode for Multisession
12:35:44 #22 Text 0 File Mmc.cpp, Line 21235
Set BUFE: Buffer underrun protection -> ON
12:35:44 #23 Text 0 File DVDR.cpp, Line 2340
Start write address at LBA 0
DVD high compatibility mode: No
12:35:44 #24 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer
Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW,
DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h,
4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
12:35:46 #25 Text 0 File Cdrdrv.cpp, Line 1287
12:35:46.245 - PIONEER DVD-RW DVR-109\H1 T0 : Queue again later
12:36:06 #26 SCSI -1128 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x09B20000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0xFF 0xFF 0x04 0x50 0x0E
0x00 0x00 0x00 0x00 0x11 0x05
12:36:06 #27 CDR -1128 File Writer.cpp, Line 311
Unrecoverable read error
12:36:06 #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:36:06 #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
12:36:07 #30 Text 0 File DVDR.cpp, Line 2603
EndDAO: Last written address was 767
12:36:07 #31 Phase 133 File dlgbrnst.cpp, Line 1832
Writing short lead-out
12:36:07 #32 SCSI -1176 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x03 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x72 0x04
12:36:07 #33 CDR -1176 File WriterStatus.cpp, Line 167
Session fixation error
12:36:07 #34 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
12:36:07 #35 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158),
size=95360 bytes, created 04/08/2004 05:59:42 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs :
0 (Security Option)
This message has been edited since posting. Last time this message was edited on 12. April 2005 @ 09:43
|
Moderator
|
14. April 2005 @ 02:44 |
Link to this message
|
thought i'd chip in here, was searching for something else and read this post. Looks like you've used all saugmon's suggestions, but you're still using questionable discs -
Quote:
Unrecoverable read error
Quote:
Session fixation error
Quote:
Disc Manufacturer: SKC Co - .,Ltd.
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
cuzzer
Newbie
|
26. April 2005 @ 15:21 |
Link to this message
|
|
thanks for your help, just to give you some feedback i have now started useing taiyo yuden 8x fullface and also tryed verbatim 16x. i have done about 20 copys so far and not one coaster...cheers.... just one more quick point! even tho all my failers were with datawrite fullface printables i am still able to burn to datawrite yellow 8x non printable and datawrite non fullface printables??....
i get all my discs from (SVP)www.blankdiscshop.co.uk
|
AfterDawn Addict
|
26. April 2005 @ 17:23 |
Link to this message
|
Quote:
even tho all my failers were with datawrite fullface printables i am still able to burn to datawrite yellow 8x non printable and datawrite non fullface printables??....
Probably all different manufacturers,and the skc are one of the worst.I didn't see skc on that list I posted earlier,must be a newer media.
Full hub printables: I get the verbatim data life plus +8x.Coded mcc-003. Notice some of those + datawrite +8x's are made by the same manufacturer!I'd take the mcc,prodisc,and fujifilm codes in them and consider the rest to be land fill.
Stick with the ty's,they are one of the best-if not,the best.
Later
HP a1118x-b/athlon 64-3300+/BenQ 1650 BCDC/LG 8163B/Modded Wii/Epson-R300 and Ty Watershields!!!
|
Moderator
|
26. April 2005 @ 22:43 |
Link to this message
|
|
@cuzzer - nice one. good shop as well - svp. been using them awhile now myself. Apparently the best place in UK to get TY's but i'm happy with the £8 for my 25tubs of datalifeplus's.
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
rcover
Junior Member
|
27. April 2005 @ 07:52 |
Link to this message
|
Hello I've been backing up for some time now and I use dvddecrypter 1st. Then I use DVD Shrink to analize and decode and also have it set up so decrpter burns also. I use ritek media and have a Micro Advantage that has all the latest even d/l. Have real good luck with my jobs. Hope this might help out. Rex
|
|
rcover
Junior Member
|
27. April 2005 @ 07:54 |
Link to this message
|
|
ooooops forgot I also have a Epson R320 dvd printable printer. Nothing but good luck so far. Rex
|
|
Advertisement
|
|
|
|
TheButler
Newbie
|
11. May 2005 @ 17:12 |
Link to this message
|
|
I use the Pioneer 109 at work, which is as far as I know using the non-official firmware from Liggy&Dee.
We've used well over 100 of the Datawrite Titanium printable top 8x disks now and not had a single failure.... which makes me think it's not the media at fault here.
If you want to put your neck out a little, I'd personally look at updating the firmware with a hacked version, which are usuaully far more optimized for current media as well as improving general performance of the drive.
---
TheButler
|
|
