|
nOOb HERE!! NEED HELP!!!
|
|
|
Max_Power
Suspended due to non-functional email address
|
22. April 2005 @ 18:13 |
Link to this message
|
|
ihave a xenium ice chip and i have had my xbox chip installed for awhile now and i am pretty impressed with myself since i did it with no problems, i think. but the real problem is that i dont have a damn clue how to ftp my xbox to the pc or how to create an iso image or how to burn with nero. i tried it all of it a couple of times before but was unsuccessful since my xbox didnt recognize the disc. so i thought that maybe it was the media i was using. that was not the problem. then i thought it was my chip because maybe i need a new evox i think. im still not sure if that is not the problem. anyway, i need to know what im doing wrong and how to do it all if i am. Plz help!!!!!!
Thx 'n' advance.
|
|
Advertisement
|
|
|
|
|
PimpDawg
Suspended due to non-functional email address
|
24. April 2005 @ 08:51 |
Link to this message
|
Proud member of the Afterdawn forums! |
|
Max_Power
Suspended due to non-functional email address
|
24. April 2005 @ 17:53 |
Link to this message
|
|
i followed the instructions on how to ftp but every friggin time i try, it either says no route to host or connection refused. it said connection refused because instead of taking to crossover cable from the computer and connectying it to my xbox, i left it connected to the router and took another croos over cable and connected it from the xbox to the router. plz tell me what im doing wrong.
Thx in advance.
|
|
PimpDawg
Suspended due to non-functional email address
|
24. April 2005 @ 18:54 |
Link to this message
|
|
So let me get this straight, you are using crossover cable to connect your Xbox to your router?
That right there is a problem. What you need is Straight Through ethernet cable, and you need 3 of these. One that goes from your modem to the router WAN port, one that goes from your PC to the router, and one that goes from your Xbox to the router. Do not use crossover cable, it will not work when networking. Crossover cable is only used when you are directly connecting your Xbox to PC. So if you have a long enough crossover cable, just connect one end to your PC and the other to your Xbox and that should work.
Proud member of the Afterdawn forums!
|
|
shdwsfall
Member
|
24. April 2005 @ 22:59 |
Link to this message
|
|
^That...OR, he could just use 1 of his crossover cables and connect his xbox directly to his PC. Much easier IMO.
<embed src="http://www.shatterock.com/products/software/qryspree/flash_sig.swf?gamertag=DreadShackal" allowScriptAccess="always" quality="high" bgcolor="#124269" width="425" height="90" name="user_sig" align="middle" type="application/x-shockwave-flash" pluginspage="http://www.macromedia.com/go/getflashplayer" /> |
|
Max_Power
Suspended due to non-functional email address
|
25. April 2005 @ 14:16 |
Link to this message
|
|
that is what i did in the first place. i took the cross over cable and connected my xbox directly to the pc. then it said no route to host. so then i did the cross over to router to pc. there it said connection refused.
|
Member
|
25. April 2005 @ 19:41 |
Link to this message
|
|
do you have an ip address?
|
|
shdwsfall
Member
|
25. April 2005 @ 20:25 |
Link to this message
|
|
make sure your xbox is turned off when you go plugging in cables. Then boot up the xbox, make sure your xbox's gateway is the same as your computers IP, then just type in your xbox's IP into your ftp program for the address, then username and password are both: xbox
<embed src="http://www.shatterock.com/products/software/qryspree/flash_sig.swf?gamertag=DreadShackal" allowScriptAccess="always" quality="high" bgcolor="#124269" width="425" height="90" name="user_sig" align="middle" type="application/x-shockwave-flash" pluginspage="http://www.macromedia.com/go/getflashplayer" />
|
|
Macdawgg
Member
|
26. April 2005 @ 11:59 |
Link to this message
|
|
You could have a bad cross-over cable as well. I'd go with the router with a lan(netowrk) cable and read the tutorials that were posted here about Ftping into your box-If you don't have a clue what a static ip is or how to change one then read up on that first.
|
|
Max_Power
Suspended due to non-functional email address
|
26. April 2005 @ 14:03 |
Link to this message
|
|
how do i find out what the ip adress is for my computer
|
|
Max_Power
Suspended due to non-functional email address
|
26. April 2005 @ 14:27 |
Link to this message
|
|
never mind. i found the copmputers ip address and even tried that adress for the url but no success. i also turned off the xbox before i installed the crossover cable. i pretty sure its not the cable since i used that same cable for live and it worked fine for that.
|
|
Max_Power
Suspended due to non-functional email address
|
28. April 2005 @ 05:41 |
Link to this message
|
|
can anyonetell me what the problem is with my ftping or is everyone out of ideas?
|
|
Quadratic
Senior Member
|
28. April 2005 @ 06:40 |
Link to this message
|
Do you have a dashboard? If so, check and see if it recognizes the connection between your PC and Xbox (it should say "100 line/duplex" or something besides no connection). If you don't have a dashboard, that might very well be your problem.
Also, your computer's I.P. address has nothing to do with FTPing into your xbox. You can establish a connection between your xbox and your pc by using the ethernet port in your computer, a NIC, or a hub/switch/router. If you're using your ethernet port or a NIC, you need to edit your LAN properties. Go to your LAN, and then choose TCIP/IP, and click properties. Choose "Use this I.P. Address"
And type in this:
I.P.-192.168.0.1
Subnet Mask-255.255.255.0
Also, make sure you set your xbox's I.P. to "Static." (it has it's own option in the dashboard).
Now, go in FlashFXP (or whatever FTP program you have), and make a new site called "XBOX" or whatever you prefer. For the I.P., type in 192.168.0.3, and for the username type xbox, and for the password type xbox.
For more info, check out this thread: http://forums.afterdawn.com/thread_view.cfm/141037
Good luck!
Proud Member of Afterdawn and http://www.teammodders.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Want to know how to make backups? Check here:http://forums.afterdawn.com/thread_view.cfm/141037 |
|
Max_Power
Suspended due to non-functional email address
|
28. April 2005 @ 09:07 |
Link to this message
|
|
what is a dashboard?
|
|
PimpDawg
Suspended due to non-functional email address
|
28. April 2005 @ 09:27 |
Link to this message
|
|
It is basically a main menu for your mod chip.
Proud member of the Afterdawn forums!
|
|
shdwsfall
Member
|
28. April 2005 @ 11:16 |
Link to this message
|
|
You should be using evolutionX as your dashboard
<embed src="http://www.shatterock.com/products/software/qryspree/flash_sig.swf?gamertag=DreadShackal" allowScriptAccess="always" quality="high" bgcolor="#124269" width="425" height="90" name="user_sig" align="middle" type="application/x-shockwave-flash" pluginspage="http://www.macromedia.com/go/getflashplayer" />
|
|
Max_Power
Suspended due to non-functional email address
|
28. April 2005 @ 15:22 |
Link to this message
|
|
what if i dont have an evolutionx dsashboard for my chip. i have a xenium ice chip remember, and it came preflashed with an os system if that matters any.
|
|
Macdawgg
Member
|
28. April 2005 @ 18:40 |
Link to this message
|
|
Max-you have more than enough info here at your disposal-and you can always go to the chipmakers webpage and read the faqs at thier forum-but enough is enough! do your research!!!
|
|
fixmyxbox
Junior Member
|
28. April 2005 @ 21:28 |
Link to this message
|
|
If your not going to do the research you need to have someone install the chip for you. Thats just how it is.
|
|
Quadratic
Senior Member
|
29. April 2005 @ 05:09 |
Link to this message
|
Quote:
what is a dashboard?
I figured this was the problem before I typed my post. Your problem is that you don't have a dashboard, and THAT'S the reason why you can't FTP. You need a dashboard or a chip that supports FTP.
Quote:
what if i dont have an evolutionx dsashboard for my chip. i have a xenium ice chip remember, and it came preflashed with an os system if that matters any.
With WHAT os system? If you mean a new BIOS, you STILL need a dashboard (because obviously your chip doesn't support FTP). You need to make an evox boot disc. Find out how to do that here: http://www.afterdawn.com/guides/archive/xbox_evolution_x.cfm
There are other dashboards, such as UnleashX and Avalaunch, but Evox is the most popular. Install the dashboard first, and then attempt to FTP.
Proud Member of Afterdawn and http://www.teammodders.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Want to know how to make backups? Check here:http://forums.afterdawn.com/thread_view.cfm/141037 |
|
PimpDawg
Suspended due to non-functional email address
|
29. April 2005 @ 15:33 |
Link to this message
|
|
Well said!!!
Proud member of the Afterdawn forums!
|
|
Max_Power
Suspended due to non-functional email address
|
30. April 2005 @ 18:58 |
Link to this message
|
|
Macdawg, if you only knew how much researchi did for this chip stuff. i told you guys i was a noob to the max. ithis was my final resort. i was desperate for help and im asking questions because i was hoping that someone was going to help. i did implicable research and nothing. so hopefully what you guys gave me is enough.
|
|
Advertisement
|
|
|
|
Max_Power
Suspended due to non-functional email address
|
30. April 2005 @ 19:02 |
Link to this message
|
|
oh someone said that a dashboard was a main menu for my chip. if you mean the page that comes up and has launch menu, reboot. settings, and etc. then yes i have one. the only reason i said os system was because i read on some sites that sometimes preflashed chips, like mine, are disfunctional.
|
