|
need help flashing X3
|
|
|
BLUV30
Suspended due to non-functional email address
|
7. May 2005 @ 15:29 |
Link to this message
|
|
Everything is works fine, the XBOX turns off after flashing just like its supposed to, but when I turn it back on I still get the Flasg Bios 3.0.1 screen.
|
|
Advertisement
|
|
|
|
|
Twinski
Member
|
8. May 2005 @ 17:37 |
Link to this message
|
|
One thing to make sure of is that you press the power button with a quick tap. And one more thing you should check out is that little board you needed to hook up with the on/off board from your xbox, flip it over and make sure that none of the solder spots on the board are touching. good luck.
|
|
PimpDawg
Suspended due to non-functional email address
|
8. May 2005 @ 20:51 |
Link to this message
|
|
Also, make sure your settings on your X3 switch are correct for the X3 3108 1MB bios. On, On, Off, Off, Off is one way, Off, On, Off, Off, Off is another way.
Try flashing your chip in the 3.0.3 flashmode, you can get to that by just tapping the power button (the switch color will be blue). What version Xbox do you have?
Proud member of the Afterdawn forums! |
|
mdsup
Suspended due to non-functional email address
|
8. May 2005 @ 22:38 |
Link to this message
|
|
my guess would be that you flashed the chip with flashbios, which happens to already be on the chip...get a hold of the x3 bios and flash you chip with that.
1.6 xbox
x3
dual hd's
seagate 300gig hd
seagate 100gig notebook hd
lots of led's
Halo2 LE(the blue case)
1.4
x3/x3 control panel/x3 lcd
400gig seagate
blue/green eject light
white controller port lights
|
Senior Member
|
9. May 2005 @ 01:20 |
Link to this message
|
|
|
BLUV30
Suspended due to non-functional email address
|
9. May 2005 @ 07:46 |
Link to this message
|
|
Yes, I did flash it with the same bios. But I finally realized this and flashew with v16 bios, it flashed but I have sound with no pic. Ive heard I should have used X3 3108 bios, but how do I do that now, can I somehow flash again? I have xBOX V1.5,X3 chip w/solderless adapter.
|
|
Achilles3
Suspended due to non-functional email address
|
9. May 2005 @ 11:17 |
Link to this message
|
|
That's your problem, you flashed a BIOS for v1.6 Xboxes on your v1.5 Xbox. Just reflash it, the X3 allows you to flash a new BIOS over a bad one.
This message has been edited since posting. Last time this message was edited on 9. May 2005 @ 11:21
|
|
BLUV30
Suspended due to non-functional email address
|
9. May 2005 @ 11:35 |
Link to this message
|
|
How do I reflash it? I guess I need the blue flashbios screen but my screen is blank right now
|
|
Achilles3
Suspended due to non-functional email address
|
9. May 2005 @ 11:45 |
Link to this message
|
|
Leave the bank switches to where you had the bad flash and press the Power+Eject buttons together to get to the backup BIOS, then reflash from there.
|
|
BLUV30
Suspended due to non-functional email address
|
9. May 2005 @ 11:51 |
Link to this message
|
|
Ok, I do that & the XBOX goes on off on but the same blank screen with sound pops up
|
|
Achilles3
Suspended due to non-functional email address
|
9. May 2005 @ 11:57 |
Link to this message
|
|
I don't know if this is recommended, but switch to another bank to boot up to the FlashBIOS screen again, then switch back and reflash that way.
|
|
BLUV30
Suspended due to non-functional email address
|
9. May 2005 @ 12:00 |
Link to this message
|
|
how do I switch to other bank
|
|
Advertisement
|
|
|
|
Achilles3
Suspended due to non-functional email address
|
9. May 2005 @ 13:41 |
Link to this message
|
|
1MB Bank:
Bank 1234: on on off off <-- if this is what you had on when you flashed the bad BIOS then use the bottom one.
Bank 5678: off on off off <-- once you get to the FlashBIOS screen, switch it back to the top one and reflash.
|
