|
moving my modchip and harddisk
|
|
|
jasin39
Junior Member
|
10. May 2005 @ 14:20 |
Link to this message
|
|
HELLO. i had to swap my spiderchip and my harddrive to another xbox.
Now when it boots i get an error 6 code. I looked it up onxbox scenes and it says the kernel cannot unlok the harddisk. I tried to swap it with the original But still got error6.
Is there anything i can do?
I have the hd's keynumber..anyinfo would be helpful
|
|
Advertisement
|
 |
|
|
|
MOdMaNX
Newbie
|
10. May 2005 @ 19:34 |
Link to this message
|
|
what do you mean by "tried to put back the original?"
|
|
jasin39
Junior Member
|
10. May 2005 @ 21:56 |
Link to this message
|
|
In my old xbox, i had a spiderchip with hd combo i had bought. I used it and stored like 25 games, then when i fried my mobo. I tried to put the chip and hd into a another xbox. I even made a working copy of evo-x. Anyway when i boot the hd in the new xbox w. the chip i get the error code of 6, i looked it up on xbox scene. and it says my kernel cannot unlock the drive. So i put the Microsoft default Harddisc back in the xbox. My evox cd still boots but, then i only have the choice to boot the MS dash, So by original, i meant the hd that came w. the xbox.
If i boot evo-x disc with my old. modded hd,i get the error6 code. I dont even get to my evox screen.
does an eeprom have anything to do w. it. can i reset it. If I could get my evox to work, then i could ftp into the hd and unlock it.
|
|
MOdMaNX
Newbie
|
11. May 2005 @ 15:05 |
Link to this message
|
|
weird...did you install the chip correctly in the new XboX?
What BIOS do you have in it?
|
|
jasin39
Junior Member
|
11. May 2005 @ 15:39 |
Link to this message
|
|
I installed it correctly. When the xbox boots i see the executer logo under the BIG X. if i have my evox cd in the tray it boots with all my original menus, i can even play my games that i have backed up on disk. But i can only do this if the xbox's original hard disc is in. However, if i put the hd that came with my chip into the new xbox, then i get the error six code. And i dont get my evox screen.
So i am in real need of help. if i were to download a different dash, would that allow me to bypass the locked hd?
Is there a better dash than evox? would having one help me out?
|
|
MOdMaNX
Newbie
|
11. May 2005 @ 17:20 |
Link to this message
|
|
ok then there's something going on with your hd. so you have games backed up on your retail HD? what about your upgraded HD- I think there's a good chance you locked it to your old xbox's EEPROM.
|
|
Tbird11
Newbie
|
12. May 2005 @ 11:37 |
Link to this message
|
|
hey jasin, can you make me a copy of the evolutionx disk? Ill pay you.
|
|
knick140
Newbie
|
15. May 2005 @ 15:40 |
Link to this message
|
|
Hey jason, before you took out the hard drive did you unlock it so that it can work on other mobo's. If not maybe thats your problem. you didnt specify what versions you had.
|
|
jasin39
Junior Member
|
16. May 2005 @ 07:48 |
Link to this message
|
|
I am moving it from one vers.1 xbox to another ver.1 xbox. The only difference is that the other ver.1 xbox has a fan over the agp processor. or I think its an agp processor.
I cant remember whether or not i unlocked it, perhaps i will try to see if i can use the old xbox to unlock it.
|
|
knick140
Newbie
|
16. May 2005 @ 13:36 |
Link to this message
|
|
if one has a fan and the other doesnt then one is a 1.1 and the other is a 1.0. you have to unlock the drive.
|
|
jasin39
Junior Member
|
16. May 2005 @ 17:20 |
Link to this message
|
|
Oh ok. thanks. I went to the xbox scene page and it identified as 1.0 i guessed they did it judged on the conextant video chip. THanks for the info. Unforturnately my 1.0 box is fried, which is why i had to move the chip in the first place. Is there anyway to hook up the xbox hd to my computer so that i can atleast recover my games. At this point. i can only assume my only option is to get a new HD format it, and reinstall all my games and apps...thanks for all your advice though
|
|
knick140
Newbie
|
16. May 2005 @ 18:47 |
Link to this message
|
|
no what i would do is once you chip the next box put the hd to it and see if it reads it. I recently put my other hd in another box to seel it and it worked just fine. boot up with slayers for the first time and unlock the hd just to make sure it works.
|
|
jasin39
Junior Member
|
17. May 2005 @ 08:22 |
Link to this message
|
|
can someone IM me or Private message me where to get slayers. I ve tried the usual places, but no matter where i look, i only download at like 10 kb per second, thanks, and thanks for the advice
|
|
jasin39
Junior Member
|
17. May 2005 @ 11:23 |
Link to this message
|
|
OK. I put in an old 60gig hd i had lying around. I installed the slayers auto installer 2.6. I was excitet cos it worked! But when i rebooted the xbox, my mediacenter did not show up. ITs in red lettering and i cannot select it. SO i tried to ftp one to the hd and its still not showing up...Worse though is that when i go to my PX hdd loader, where i used to install my games for back up. I get a message saying my modchip doesnt support the eject tray trick. It worked w. the other xbox. ANy ideas on how to fix these things?
|
|
knick140
Newbie
|
17. May 2005 @ 12:55 |
Link to this message
|
|
If you put slayers in it should have everything you need. You just have to put the media center in ther right place. Fix the .ini files in your dash.
|
|
jasin39
Junior Member
|
17. May 2005 @ 20:06 |
Link to this message
|
|
i fixed the media center, but my Pxhdd loader says my modchip doesnt support the hdeject trick, But it did in the old xbox. It also says that the disc should be in the tray and it closed before i boot, but if i do that then the game autoloads before my dash loads...what to do?
on the evox cd, it has the option to flash the chip///is that advisible?
|
|
mdsup
Suspended due to non-functional email address
|
17. May 2005 @ 23:24 |
Link to this message
|
|
try using complex tools to rip games to the hd...it is a wonderful app
1.6 xbox
x3
dual hd's
seagate 300gig hd
seagate 100gig notebook hd
lots of led's
Halo2 LE(the blue case)
1.4
x3/x3 control panel/x3 lcd
400gig seagate
blue/green eject light
white controller port lights
|
|
Xekutr
Newbie
|
20. June 2005 @ 16:16 |
Link to this message
|
|
In the case of getting your old hard drive that came with your spider chip you would need to physically remove the eeprom chip from the broken mobo and use it to replace the one on your current working mobo. This will allow your xbox to unlock the drive and if need be you could lock it or unlock it, you could also use your current h/d as long as it is unlocked when you transfer over the EEPROM chip off of the broken mobo
|
|
Advertisement
|
|
|
|
sga91
Junior Member
|
20. June 2005 @ 16:56 |
Link to this message
|
|
Ok this is very simple. Your hard drive is n ow locked.
What you do is take the hard drive out, reformat it,
re install evox.
|
