i cant get the inner & outer settings set right on the printer...all my prints come out not close enough to the edge or either way too far from the edge...i tried the 23mm-inner 118mm-outer but it doesnt work it leaves big outer white ring..can any help??
My killer sig came courtesy of bb "El Jefe" mayo.
The Forum Rules You Agreed To!http://forums.afterdawn.com/thread_view.cfm/2487 "And there we saw the giants, and we were in our own sight as grasshoppers, and so we were in their sight" - Numbers 13:33
movies27
I usually set mine at 22 or 21 inner and 119 outer. These settings worked for both Ritek and TY. Try increasing the outer setting by 1 mm. 120 is as high as it goes.
Movies 27, I have my outer set at 119 and inner at 20 for verbatim +8x-mcc-003 and maxell +8x-maxell-002 full hub printables.
I also have my adj print position: Left-0.3 and Down 0.1 to center them up perfectly.
Now when I first started downloading my disc covers,some of them were smaller size.These had to be stretched out on the template screen just after you click Import/Picture/and your selected cover.Just grab those square blocks and stretch that label to the outer line of the template,then print.
This may be what's holding you up. My first printable copy,jay and silent bob strike back, had about 20 mms of white on the outer. Half the disc labels I download have to be stretched.
