|
|
|
DVD-R won't burn anymore, dvd+r still will
|
|
|
sunflail
Suspended due to non-functional email address
|
22. May 2005 @ 00:58 |
Link to this message
|
|
I am no novice to computers, but I am still learning when it comes to burning - here's the situations. Gateway 7405gx laptop, has an hl-dt-st gwa 4080n drive that burned everything fine for about 5 months.
I have a spindle of fujifilm03's, have burned about 15 no problem, now all of a sudden my drive won't recognize dvd-r's (tried some taiyo's, sonys, ricohs, just to be sure it wasn't brand), but it will still recognize dvd+r's as blank media. Did full clean of nero, alc 120, dvd decrypter, reinstall no dice.
Redid the aspi layer with 4.7, forced 4.6 using forceaspi 1.7, tried another gcopy of the 0g03 firmware my drive came with, tried rpc-1 firmware, hell right now I'm using the 0s3t (the sony one) that people have had success burning DL's with on this drive - still recognizes all cd-r's and dvd+r's, but no dvd-r's.
All throughout each change I have reinstalled individually and together said burning programs above, and I either get no recognition whatsoever, or on simulation/test (nero/decrypter) (as I was sick of making coasters - I'm not in an area where its easy to get discs atm - read: combat zone :)), I get cannot find reference point in decrypter,could not perform end of disc-at-once in nero (which is progress I was getting couldn't perform start but during all of my install/reinstall/driver/firmware updates that got fixed).
I use daemon tools as well, but I uninstalled that to see if that helped with the DAO error as it was partially an i/o thing, but to no avail.
The drive is on its own ide port, dma still good and using (ie not in pio mode)
At this point I'm going to try to pull some trades with some buds to get +r's for my -r's, but I'm still stumped as to why the drive just stopped recognizing and refusing to burn -r's.
Any ideas out there?
Thank you in advance
edit: forgot to mention I have searched and read every thread of pertinence for the last forever on doom 9 and afterdawn about media, aspi, drive burn out, power, etc, for the last 2 weeks, which is why I'm posting as a long time reader, first time question in the newbiew forums cause it just feels like one of those easy answer I just can't grasp!
This message has been edited since posting. Last time this message was edited on 22. May 2005 @ 01:05
|
|
Advertisement
|
 |
|
|
|
Gringle
Suspended due to non-functional email address
|
22. May 2005 @ 01:34 |
Link to this message
|
Try downloading this tool http://www.dvdinfopro.com/ it will tell you what formats your burner will support, if the DVD-R box isn't ticked the problem is there.
best of luck
gringle
This message has been edited since posting. Last time this message was edited on 22. May 2005 @ 01:34
|
|
sunflail
Suspended due to non-functional email address
|
22. May 2005 @ 03:43 |
Link to this message
|
Okay tried out your program in case Nero infotool was wrong, but the drive in infotool supports everything but dvd-ram and dl's, although with the firmware it now 'supports' dl's, just haven't had a chance to try any out yet :)
I KNOW that it supports dvd-r's though as the current spindle I have of 25 I have burned 15 fine, and then it just stopped recognizing the discs as blank media - they still work fine on a friends comp so the dics are still good *crappy but still 'good' hehe* - sorry that that wasn't more clear in the first post :)
Nice program btw - can play and make isos, kinda handy hehe - okay according to your program it supports everything except dvd-r dl, hd-burn-r/rw, ddcd-r/rw, and mount rainer for read, same for write in addition to cdrw cav - using the 0S35 revision firmware, atapi-3, rpc-1
So still at a loss - more ideas! :)
|
|
Gringle
Suspended due to non-functional email address
|
22. May 2005 @ 04:44 |
Link to this message
|
|
Nope I think 't one of those vaigarys' that keep us playing with these things. :)
regards
gringle.
|
|
Advertisement
|
|
|
|
sunflail
Suspended due to non-functional email address
|
22. May 2005 @ 05:15 |
Link to this message
|
Okay - so the drive at least recognizes some YUDEN dvd+r's as blank media, reports free space, etc
but still won't burn with Nero or anything else - here's an example Nero log for ya'll to analyze
also couple questions before the log - dvd+r's after getting write error still report as empty unlike -r's - is this normal or a fluke? also ... crap forgot my other question, I'll post it later haha
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c
Recorder: <HL-DT-ST DVDRAM GMA-4080N>Version: 0S35 - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 3 TA 0 - 6.6.0.13
Adapter driver: <a347scsi> HA 3
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHT2080AT atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GMA-4080N atapi Port 1 ID 0 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GMA-4080N D: CDRom3
AXV CD/DVD-ROM E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (522736kB)
Free physical memory: 125MB (128836kB)
Memory in use : 75 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.5.2005
ISO compilation
5:03:23 PM #1 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : FALSE
5:03:23 PM #2 Text 0 File Reader.cpp, Line 127
Reader running
5:03:23 PM #3 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GMA-4080N running
5:03:23 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
5:03:23 PM #5 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media
5:03:23 PM #6 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2124031 (472:00.31, 4148MB)
5:03:23 PM #7 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
5:03:23 PM #8 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: HL-DT-ST DVDRAM GMA-4080N, Media type: DVD+R
Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
5:03:23 PM #9 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
5:03:23 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2124032 (2124032) = #2124032/472:0.32
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2124032 blocks [HL-DT-ST DVDRAM GMA-4080N]
--------------------------------------------------------------
5:03:23 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [HL-DT-ST DVDRAM GMA-4080N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4350017536, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2124032 | lead-out | 1 | 0x41 | 0x00
5:03:23 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
5:03:23 PM #13 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.
5:03:23 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
5:03:23 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3,324 KB/s)
5:03:23 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
5:03:23 PM #17 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: YUDEN000
Media type ID: T02
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 59 55 44 45 4E - 30 30 30 54 30 32 00 38 ...YUDEN000T02.8
23 54 37 10 02 4E 72 02 - 8C 63 16 16 0B 0B 0A 0A #T7..Nr..c......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
5:03:23 PM #18 Text 0 File DVDPlusRW.cpp, Line 652
Start write address at LBA 0
DVD high compatibility mode: Yes
5:03:54 PM #19 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x042C0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x35 0x2D 0x00 0x0E 0x0C 0x00
5:03:54 PM #20 CDR -1135 File Writer.cpp, Line 311
Write error
5:03:54 PM #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
5:03:54 PM #22 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
5:03:54 PM #23 SCSI -1135 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x35 0x2D 0x00 0x0E 0x0C 0x00
5:03:54 PM #24 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
5:04:09 PM #25 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
5:04:09 PM #26 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/12/2005 2:28:09 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=95360 bytes, created 8/4/2004 4:00:00 PM (Adapter driver for rec)
File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 4/30/2004 9:33:00 AM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
