|
Hi guys I have a problem with a dual layer disk (i use nero)the following log occurs
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\PROGRA~1\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22/7/2004 17:33:44
Nero version: 6.3.1.25
Recorder: <_NEC DVD_RW ND-2500A> Version: 1.07 - HA 2 TA 0 - 6.3.1.25
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <MATSHITA UJDA730 DVD/CDRW>Version: 1.00 - HA 1 TA 0 - 6.3.1.25
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : IC25N030ATCS04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : MATSHITA UJDA730 DVD/CDRW atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
MATSHITA UJDA730 DVD/CDR D: CDRom0
_NEC DVD_RW ND-2500A F: CDRom1
=======================
AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 734MB (752624kB)
Free physical memory: 400MB (410520kB)
Memory in use : 45 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
21.5.2005
Burn DVD Image
18:29:19 #1 Text 0 File Reader.cpp, Line 126
Reader running
18:29:19 #2 Text 0 File Writer.cpp, Line 124
Writer _NEC DVD_RW ND-2500A running
18:29:19 #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 1365880832
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=614:12.36 ( 2763936)
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Documents and Settings\Vasilis03\My Documents\Image.nrg>
18:29:19 #4 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-at-once, using DVD media
18:29:19 #5 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 2763935 (614:12.35, 5398MB)
18:29:19 #6 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD DVD)
18:29:19 #7 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: _NEC DVD_RW ND-2500A, Media type: DVD+R9 Double Layer
18:29:19 #8 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
18:29:19 #9 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) provided
original disc pos #0 + 2763936 (2763936) = #2763936/614:12.36
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2763936 blocks [_NEC DVD_RW ND-2500A ]
--------------------------------------------------------------
18:29:19 #10 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [_NEC DVD_RW ND-2500A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 5660540928, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2763936 | lead-out | 1 | 0x00 | 0x41
18:29:19 #11 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 2.4x (3.324 KB/s)
18:29:20 #12 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
18:29:20 #13 Text 0 File DVDPlusDualLayer.cpp, Line 397
Disc finalized, LBA total Image size: 2763936 (5398MB), Last LBA L0: 1381983 (2699MB)
18:29:20 #14 Text 0 File DVDPlusDualLayer.cpp, Line 481
L0 Data Zone Capacity set to 1381984 (151660h, 2699MB) -> OK, confirmed setting
18:29:20 #15 CDR -1205 File DVDPlusDualLayer.cpp, Line 506
Burning Layer 1
18:29:20 #16 Text 0 File DVDPlusDualLayer.cpp, Line 514
Start writing layer 1 at address 0 (0h)
18:29:20 #17 SCSI -1066 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03587000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
18:29:20 #18 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 28:33,611 (1713611ms) -> OK
18:29:20 #19 Text 0 File DVDPlusRW.cpp, Line 628
Start write address at LBA 0
DVD high compatibility mode: Yes
18:29:25 #20 SCSI -1046 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x08D80000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x11
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x11
18:29:25 #21 CDR -1046 File Writer.cpp, Line 304
Illegal disc
18:29:25 #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
18:29:26 #23 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
18:29:26 #24 SCSI -1046 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x11
CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x11
18:29:26 #25 SCSI -1046 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x11
CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x11
18:29:26 #26 Phase 127 File dlgbrnst.cpp, Line 1855
Generating DVD high compatibility borders
18:29:26 #27 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
18:29:26 #28 CDR -1046 File WriterStatus.cpp, Line 164
Illegal disc
18:29:26 #29 TRANSFER -24 File WriterStatus.cpp, Line 164
Could not perform end of Disc-at-once
18:29:26 #30 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
18:29:26 #31 Phase 38 File dlgbrnst.cpp, Line 1855
Burn process failed at 2.4x (3.324 KB/s)
Existing drivers:
File 'Drivers\Tpp725.sys': Ver=5.04.1150.0 , size=43269 bytes, created 5/10/2001 12:54:28
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 18/4/2005 16:28:31 (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 0, 5, size=93440 bytes, created 13/9/2004 11:54:06 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 0, 5, size=28672 bytes, created 13/9/2004 11:54:46 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 0, 5, size=7680 bytes, created 13/9/2004 11:58:10 (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 3/8/2004 23:59:44 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
is the problem at the disk or at my DVD-R (I have a NEC DVD_RW ND-2500A Version: 1.07 support DL disks) can anyone help me
|
