|
raven36,
Sent you a private message. Check it out.
microunit,
No. You will have to put each file on its own CD. The recorder has no way of telling them apart. Remember to do the system update first.
To All,
Updates over-write the installed firmware, not add to it. This is why you do not need to install every update from what's on the recorder to what's current. This is also why, if you are using hacked firmware, you have to hack the update or use a hacked update or the hacked features will be overwritten with the factory settings.
The difference between the LiteOn and ILO firmware:
LiteOn will release just a drive update if needed and a system update if needed. If they happen at the same time, they will issue a system/drive update in one file. I'm not sure about the but I think the only recorder that this has been done with is the 5005.
The ILO, so far, has either a system/drive update or a system only update.
The confusing thing is, what files do you need. If you think about it in a logical fashion, it's fairly easy. You want the newest system AND drive update to make sure you are up to speed. If the newest update is system only, you know you will have to go back farther to find the firmware with the newest drive update included. This may be an update on its own (LiteOn) or could be part of a previous system/drive update (LiteOn or ILO).
On the LiteOn 5005, it is pretty easy. Download the newest system file and the newest drive file. If the newest file is a system/drive update, you only need to download the one file.
The ILO takes a little more thinking. Since there have been no drive only updates for the ILO, you will need to download the last system/drive update to get the newest drive update. Then, if there is a newer system only update, download it and install it after the older system/drive update. This will just update the system and leave the drive alone. Example: You have an ILO R04. The installed firmware revision is 1095. The ILO R04's newest update is 1098RevB. It is a system only update. You know that there was a drive update included in 1097 that came out between the two. You would first download and install 1097, a system/drive update, to get the drive part of the update. It doesn't have to be the hacked version since you will be updating the system part again later. After installing 1097, the drive now has the last available update installed to it. Now download and install the hacked version of 1098RevB. This will overwrite just the system part of the recorder and also install the hacks. You now have a recorder with the latest system and drive updates.
In my opinion, I think it would be easier if they did it like the 5005 for all the updates. It is much easier to determine which files you need if the drive and system updates were separate.
Guitarman
ILO DVDR04/HD04 Firmware Download Page
http://www.ss3f.com/ilo
ILO DVDRHD04
Pioneer DVR-420H-S
Magnavox Moxi 80gig DVR This message has been edited since posting. Last time this message was edited on 2. June 2005 @ 08:02
|
