afterdawn.com > forums > digital video > video to dvd > copying dvds authored with nero
Copying DVDs authored with Nero
loopyloop
Junior Member
1. June 2005 @ 18:59
Link to this message
I put together compilation DVDs of TV shows I've recorded with the latest Nero and sometimes I need to make a copy. Using the "copy DVD" feature never works - says the DVD is blank or something. What am I doing wrong?
K7N2 Delta ILSR bios ver. 7.8
Geforce FX 5950
XP3000+
2x512mb ddr400 - corsair xms
Wavemaster Case
2XWD 36GB Raptor in raid-0
Soundblaster Audigy 2
Advertisement
AfterDawn Addict
2. June 2005 @ 05:38
Link to this message
If the original DVD contains Audio_TS and Video_TS folders, try this:
At Nero Recode, click 'import dvd', then go to and highlight the Vido_TS folder, confirm, and that's it.
loopyloop
Junior Member
2. June 2005 @ 06:18
Link to this message
Interestingly enough, I'd discovered by trial and error that I could do it through Nero recode, but why won't it make a copy?
K7N2 Delta ILSR bios ver. 7.8
Geforce FX 5950
XP3000+
2x512mb ddr400 - corsair xms
Wavemaster Case
2XWD 36GB Raptor in raid-0
Soundblaster Audigy 2
This message has been edited since posting. Last time this message was edited on 2. June 2005 @ 06:34
loopyloop
Junior Member
2. June 2005 @ 18:55
Link to this message
Is that not strange that is doesn't even see it as a written on DVD?
K7N2 Delta ILSR bios ver. 7.8
Geforce FX 5950
XP3000+
2x512mb ddr400 - corsair xms
Wavemaster Case
2XWD 36GB Raptor in raid-0
Soundblaster Audigy 2
AfterDawn Addict
3. June 2005 @ 06:55
Link to this message
I don't quite understand you here. Did Nero Recode work?
loopyloop
Junior Member
3. June 2005 @ 06:57
Link to this message
Yes, could alre4ady do that. When using the copy DVD function, it should do just that - not tell me there's nothing on the DVD...
K7N2 Delta ILSR bios ver. 7.8
Geforce FX 5950
XP3000+
2x512mb ddr400 - corsair xms
Wavemaster Case
2XWD 36GB Raptor in raid-0
Soundblaster Audigy 2
AfterDawn Addict
5. June 2005 @ 01:25
Link to this message
Good, happy DVD copying then!
loopyloop
Junior Member
5. June 2005 @ 06:02
Link to this message
Yes, thanks, but I'd like to figure out why the copy function doesn't work...
K7N2 Delta ILSR bios ver. 7.8
Geforce FX 5950
XP3000+
2x512mb ddr400 - corsair xms
Wavemaster Case
2XWD 36GB Raptor in raid-0
Soundblaster Audigy 2
Advertisement
Moderator
5. June 2005 @ 08:54
Link to this message
@loopyloop - let's try something -
download Nero info-tool from here - http://www.snapfiles.com/get/neroinfo.html
Run it, note down the following, and paste here. Here's what mine shows -
click on the drive tab, note down the firmware version
click on configuration tab, note down the DMA fields, ie on or off
it may be worth clicking on the aspi tab, and note down anything that might be missing
then download dvdinfopro (free) and do a media info check and post details here
Main PC ~
Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~
DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 6. June 2005 @ 10:43
afterdawn.com > forums > digital video > video to dvd > copying dvds authored with nero