|
DVD Decrypter issue
|
|
|
dudleyl
Newbie
|
3. June 2005 @ 18:11 |
Link to this message
|
|
Today while burning a DVD with DVD Decrypter/DVD Shrink, the screen that shows you the percentage of encoding, the time continues to go up. I've been encoding for over 30 minutes and only at 2% complete. What's wrong. I never had this problem before.
|
|
Advertisement
|
 |
|
|
Senior Member
|
3. June 2005 @ 23:27 |
Link to this message
|
Quote:
Today while burning a DVD with DVD Decrypter/DVD Shrink
Are you doing anything else while burning? Try diabling any unnecessary programs running in the background as they use cpu and could in most cases slow your burn time down significantly. Check to see if your burner has dma mode enabled. Antivirus and internet connectivity are factors as they use pc resources as well. Also what media are you using. If what i suggested does not assist you post your decrypter or shrink log and we(forum members) can help you out.
|
Moderator
|
4. June 2005 @ 02:10 |
Link to this message
|
could be DMA (6 read errors causes your drives to be knocked down from DMA into PIO mode); see here to reset the DMA if necessary - http://home.comcast.net/~bbmayo/DMA.html
try that out, check if the disc is dirty, and try again.
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***This message has been edited since posting. Last time this message was edited on 4. June 2005 @ 02:10
|
Senior Member
|
4. June 2005 @ 05:04 |
Link to this message
|
|
If I didn't know any better i would think that creaky is trying to sway me by putting ty after verbs in his signature :)
|
Moderator
|
4. June 2005 @ 05:05 |
Link to this message
|
|
who, me :)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
ripfuel
Suspended due to non-functional email address
|
14. June 2005 @ 08:18 |
Link to this message
|
|
I had the same problem at one time, what i suffest is blocking all internet traffic through your firewall (Norton). Since i blocked all traffic i did not have problem anymore.
|
|
teznz
Newbie
|
27. June 2005 @ 02:47 |
Link to this message
|
I have been having the same problem even when not connected to the net.
Creaky that link you posted comes up with: The requested page does not exist on this server. The URL you typed or followed is either outdated or inaccurate.
I have scanned my computer for investation and spyware, nothing found.
Heres a copy of my log.Doesn't seem to be different to me.
I 22:45:11 DVD Decrypter Version 3.5.4.0 started!
I 22:45:11 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)
I 22:45:11 Initialising SPTI...
I 22:45:11 Searching for SCSI / ATAPI devices...
I 22:45:11 Found 1 DVD±RW!
W 22:45:16 Possible Structure Protection Found!
W 22:45:16 1 area has been marked as 'suspect'.
W 22:45:16 Dummy sectors will be inserted where necessary.
I 22:45:42 Operation Started!
I 22:45:42 Source Device: [1:2:0] TSSTcorp CD/DVDW TS-H552B TS05 (G:) (ATA)
I 22:45:42 Source Media Type: DVD-ROM
I 22:45:42 Source Media Region Code: 2, 4
I 22:45:42 Source Media Copyright Protection System Type: CSS/CPPM
I 22:45:42 Source Media Implementation Identifier: Spruce Technologies
I 22:45:42 Destination Folder: C:\Out Of Season\
I 22:45:42 File Splitting: By File
I 22:45:42 Remove Structure Protection: Yes
I 22:45:42 Bad Sector Removal Method: Normal
I 22:45:42 Detect Mastering Errors: No
I 22:45:42 Multi Angle Processing: No
I 22:45:42 Remove Macrovision Protection: Yes
I 22:45:42 Stream Processing: No
I 22:45:42 Copying VIDEO_TS.IFO... (LBA: 296 - 303) - KEY: N/A
I 22:45:43 Copying VIDEO_TS.VOB... (LBA: 304 - 380) - KEY: N/A
I 22:45:43 Copying VIDEO_TS.BUP... (LBA: 381 - 388) - KEY: N/A
I 22:45:43 Copying VTS_01_0.IFO... (LBA: 389 - 403) - KEY: N/A
I 22:45:43 Decrypting VTS_01_0.VOB... (LBA: 404 - 1021) - KEY: C0 00 00 02 72
I 22:45:44 Decrypting VTS_01_1.VOB... (LBA: 1022 - 1216) - KEY: C0 00 00 02 72
I 22:45:44 Copying VTS_01_0.BUP... (LBA: 1217 - 1231) - KEY: N/A
I 22:45:44 Copying VTS_02_0.IFO... (LBA: 1232 - 1267) - KEY: N/A
I 22:45:44 Decrypting VTS_02_0.VOB... (LBA: 1268 - 1344) - KEY: C0 00 00 02 73
I 22:45:44 Decrypting VTS_02_1.VOB... (LBA: 1345 - 525546) - KEY: C0 00 00 02 73
|
Moderator
|
27. June 2005 @ 03:33 |
Link to this message
|
@teznz - bbmayo is redesigning his website. Try this for sorting DMA -
Quote:
Run REGEDIT. Go to the following key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E96A-E325-11CE-BFC1-08002BE10318}
It has subkeys like 0000, 0001, 0002, etc. Normally 0001 is the primary IDE channel, 0002 the secondary, but other numbers can occur under certain circumstances. You have to go through these subkeys and check the DriverDesc value until you find the proper IDE channel.
Delete MasterIdDataChecksum or SlaveIdDataChecksum, depending on whether the device in question is attached as master or slave, but it can't actually hurt to delete both. Reboot. The drive DMA capabilities will be redetected.
Open Device Manager again and check whether the device is now actually using DMA mode. If so, congratulations, you've made it (at least until the next time Windows disables DMA)
Also, latest firmware (version TS10) for your drive, dated Aug 2004, is here - http://forum.rpc1.org/dl_firmware.php?download_id=1911
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
teznz
Newbie
|
28. June 2005 @ 01:08 |
Link to this message
|
|
Hi creaky,
I ran regedit and found 132 problems. only a trail version so left 81 problems until i purchase.But please help I am stuck as to where and how to go with the next step on finding the key
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E96A-E325-11CE-BFC1-08002BE10318}
normally my mate shows me what to do when things happen but all this was beyond him to.
Thanks for your help.
teznz
|
|
teznz
Newbie
|
28. June 2005 @ 04:59 |
Link to this message
|
|
Finally I have found and deleted MasterIdDataChecksum and SlaveIdDataChecksum.
When I check the device though it still states secondary ATA channel.
I,ve re-booted twice and double checked that I deleted both MasterIdDataChecksum and SlaveIdDataChecksum.
I have now also used Advanced Registry optimiser and cleaned and de-fragged the register.
Is there another way to change my drive back to DMA?
|
|
AnthrAx85
Newbie
|
3. October 2005 @ 14:21 |
Link to this message
|
I know this is an old topic but did you fix the problem? I'm asking this because I just got the movie out of season and I couldn't get it to copy. I work in a movie store and I swapped my disc with 10 other ones and I couldn't get it to copy with anything. Decrypter would stop at about 22% and then just sit there while my dvd drive was reading the dvd. I tried it about 100 times with what seems like 100 different combinations of decrypter, CloneDVD, and AnyDVD. I waited about 15 minutes and then it finally picked up speed and finished copying. Now, I don't know what movie you are trying to copy, but the destination for your dvd says "c:\out of season" so I figured it's the same movie that we are trying to copy. There's some kind of new protection on this dvd or there is some defect somewhere when they manufactured the dvd's. But if you fixed your problem then cool, if not, maybe just sit and let it go for about 15-30 minutes and see if that helps.
|
|
cynthia_
Member
|
4. October 2005 @ 23:56 |
Link to this message
|
Use AnyDVD it will solve your problem.
WTF... You cant use any HTML tags in here...
|
|
AnthrAx85
Newbie
|
6. October 2005 @ 03:08 |
Link to this message
|
No offense, I know that I only posted once here so far...but atleast read what I said before you go and post something ignorant like you did. Halfway through my post you would see that I tried AnyDVD, DVD Decrypter, and CloneDVD...so thanks, but no thanks.
|
Moderator
|
6. October 2005 @ 03:28 |
Link to this message
|
|
@anthrax85 - She is having you on, there's quite a bit of this going on around AD's forums of late. I'm on walkabout and this gadget is crap for googling and I haven't come across that dvd yet myself, but I think there's afew threads around here re that dvd.
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
Doofy
Member
|
6. October 2005 @ 04:35 |
Link to this message
|
|
There seems to be a lot of bad pressings of retail dvd's these days i have encounterd this problem quite a few times just lately. I have had bad pressings a complete box set having the wrong labels, disc 1 is disc 2 disc 5 is disc 3 etc. Quality control seems to be slipping.
By the way Creaky i took note of your advice got hold of some ty verbs perfect burns so far a lot better than the usual brand of disc my local supplier keeps sending me thanksfir that i will stick to these in future.
Burn rubber that doesn't mean warp speed
|
|
Advertisement
|
|
|
|
andmerr
Suspended permanently
|
7. October 2005 @ 01:15 |
Link to this message
|
Quote:
Use AnyDVD it will solve your problem.
that seems to be your answer to everything cynthia.It might work for you but if you read the log a bit more you would of noticed that it had already got passed the macrovision so i'm assuming then that its not a CSS issue but something else
Quote:
Remove Macrovision Protection: Yes
|
