PC to Xbox connection question.

Advertise at AfterDawn.com

Link to us!

Private messages

Compose a private message

List of all updated threads

Threads without replies

Search messages

Thursday 26.12.2024 / 08:16

Search AfterDawn Forums:

afterdawn.com > forums > archived forums > xbox - hardware mods > pc to xbox connection question.

Browse by topic

Forums

PC to Xbox connection question.

Jump to:

Posted

Message

scs2699

Junior Member

11. June 2005 @ 12:42

Link to this message

Do you have to be connected to the internet to connect to your xbox? I don't have cable, dsl or broadband. Just dial up ( long story )

I booted up evox w/ disc and now i am tying to connect the xbox to the pc so I can load the dash to the hd. I have flash fxp, I set my NIC to the right ip ( seen in tutorial ) and the cable is right ( different color combo at both ends ) and when I try connecting w/ Flash it doesn't connect.

I have the pc and xbox connected with the cable and no other internet connection is that ok?

What am I doing wrong? The tutorials always have that Internet connection in it????

Help please!!!

[ + quote]

indierock

Newbie

11. June 2005 @ 15:37

Link to this message

make sure you have your ip address set up, they need to be the same (cept the last digit) i.e. 192.168.1.1 for your pc and 192.168.1.2 for your xbox, then in flashxp make sure you into xbox as your user name and xbox as your password, thats the universal user/password and should be so in evox as well

also use avalaunch, its a more advanced dashboard, but its well worth it, and the easiest to use.

[ + quote]

jabberjab

Junior Member

13. June 2005 @ 03:49

Link to this message

in order to get you xbox to ftp you need to do the following things
note your xbox ip..
set your xbox... use static ip.... option to yes...
on your pc open network options and choose.. local aera connection... right click it and go to properties there should be an option called internet protocol tcp/ip... double click this.... now set the ip address 3 higher than your xbox... eg... xbox ip 192.168.1.200... ip on pc should be...192.168.1.203.... click ok and the subnet mask should be the same for your box and pc.... now on the xbox dash set your default gateway to whatever your pc ip address is... the one you just typed 3 higher than your xbox.... save settings and exit... reboot box and pc should recognise connection... now open flash fxp... choose quick connect and enter xbox ip.... username and passwords are.... xbox.... for both click connect and you should be in

[ + quote]

scs2699

Junior Member

13. June 2005 @ 06:01

Link to this message

Got it going last night. Thanks.

[ + quote]

samwang

Newbie

18. June 2005 @ 08:59

Link to this message

Did you means the IP of xbox MUST higher 3 than PC ip address?
The normal instruction say the pc was 1 and Xbox was 3.

I couldn't ping the XBOX ip address.I use the crossover cable to connect the pc and xbox, Anybody could help me?

[ + quote]

punqewe

Senior Member

18. June 2005 @ 09:37

Link to this message

it doesn't have to be exactly 3 up/down from the other IP. As long as it's in the same 'group' and not exactly the same. You could be one off the other IP if you like and it'll do the same.

[ + quote]

http://xtreme-source.com Forums

ruthlees

Newbie

18. June 2005 @ 17:08

Link to this message

i tried using flash fxp 2 connect 2 my xbox but it keeps on saying pasv is not implemented and something is set to ascii. Help plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz ia m in desperate need

[ + quote]

samwang

Newbie

19. June 2005 @ 02:17

Link to this message

thanks!

[ + quote]

afterdawn.com > forums > archived forums > xbox - hardware mods > pc to xbox connection question.


		User name	Password

		Not registered yet? Register here. Lost your password? Click here.