Burnng Dual Layers Help! [page 2/2]

Advertise at AfterDawn.com

Link to us!

Private messages

Compose a private message

List of all updated threads

Threads without replies

Search messages

Saturday 4.10.2025 / 14:16

Search AfterDawn Forums:

afterdawn.com > forums > dvd±r discussion > dvd±r for newbies > burnng dual layers help!

Browse by topic

Forums

Start a new thread

Burnng Dual Layers Help!

Jump to:

Posted

Message

Page:	< Previous	1	2

brobear

Suspended permanently

17. December 2005 @ 11:09

Link to this message

Quote:
The outside edges are really rough with Quite a lip on them.

And that is probably the problem with those. With rough edges and a "big lip", the discs sound like they're probably running off balance. If a label being off causes problems, you know an improperly balanced laminate layer is going to cause problems. Since you're using the same brand, but a different batch, that sort of confirms it's a problem with a batch run. Who knows how many they made on that "run" off the line? Even a good company isn't immune to a bad run. Looks like they would have caught the problem sooner though, if they even realize there was a problem.

[ + quote]

'Brobear'

I was an earth-rim walker, a lurker at the threshold of the abyss. - Grendel -

ChrisC586

Senior Member

17. December 2005 @ 15:19

Link to this message

One last thing I discovered the three packs will play on the Denim and the few good 10 packs won't. Monday I'm gonna get out the mikes andcalipers and see if theres anything there. All three ten packs came from the same retailer in two days time. The only thing after all this that I can come up with is we did get a bad batch of media.

[ + quote]

cavalieri

Newbie

20. December 2005 @ 03:29

Link to this message

I will attempt to try the Nero LOG file... I haven't checked my email and now noticed lots of people have posted to help me.

I appreciate it, and should know in a few whether or not it worked.

I did have coasters out of the 10-pack batch of HP discs... I think like 7 of them..and one has worked so far.

We'll see if that Nero Log File Works to help out!

Thanks!

[ + quote]

cavalieri

Newbie

20. December 2005 @ 03:40

Link to this message

After opening up the LOG file this is what I got..I did notice though, I spoke with someone from I/O Magic..They had me update the ASPI layers and also revert back from Firmware of GBIA to GBGA... I now run the Firmware of GBGA..I use Nero 7 to burn DVD's... Which that's what is weird. Some of the coasters, I accessed and it had a Video_TS folder and like a bunch of different things. But technically there should only be a movie file in there? Anyways, this log was from \Program Fiels\Nero\Nero 7\Core\NeroHistory.txt...Hope you guys can help on here!

Thanks!

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero API version: 7.0.1.2
Using interface version: 7.0.0.0
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\NeroVision
Internal Version: 7, 0, 1, 2

Recorder: Version: GBIA - HA 1 TA 0 - 7.0.1.2
Adapter driver: HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD2500JB-00GVC0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD800JB-00ETA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : ATAPI DVD RW atapi Port 1 ID 0 DMA: On
CdRomPeripheral : CD-ROM Drive/F5E atapi Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
CD-ROM Drive/F5E D: CDRom1
ATAPI DVD RW H: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523764kB)
Free physical memory: 117MB (120564kB)
Memory in use : 76
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

2.12.2005
NeroAPI
10:35:49 PM #1 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted

10:35:50 PM #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory

10:35:50 PM #3 Text 0 File Reader.cpp, Line 124
Reader running

10:35:50 PM #4 Text 0 File Writer.cpp, Line 113
Writer H: ATAPI DVD RW running

10:35:50 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

10:35:50 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

10:35:50 PM #7 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media

10:35:50 PM #8 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 865103 (192:14.53, 1689MB)

10:35:50 PM #9 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)

10:35:50 PM #10 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: ATAPI DVD RW, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193

10:35:50 PM #11 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 865104 blocks [H: ATAPI DVD RW]
--------------------------------------------------------------

10:35:50 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [H: ATAPI DVD RW] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1771732992, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
865104 | lead-out | 1 | 0x41 | 0x00

10:35:50 PM #14 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

10:35:50 PM #15 Phase 24 File APIProgress.cpp, Line 278
Caching of files started

10:35:50 PM #16 Text 0 File Burncd.cpp, Line 4132
Cache writing successful.

10:35:50 PM #17 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed

10:35:50 PM #18 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 8x (11,080 KB/s)

10:35:50 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:35:50 PM #20 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode

10:35:50 PM #21 Text 0 File MMC.cpp, Line 21611
Set BUFE: Seamless Link -> ON

10:35:50 PM #22 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes

10:35:50 PM #23 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

10:39:18 PM #24 Text 0 File WriterStatus.cpp, Line 116
start writing Lead-Out at LBA 865104 (D3350h), length 0 blocks

10:39:18 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

10:39:18 PM #26 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 865103

10:39:43 PM #27 Phase 37 File APIProgress.cpp, Line 278
Burn process completed successfully at 8x (11,080 KB/s)

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** NeroAPI, History File *** ======
XXXXXXXXXXXXXXXXXXXXXXXXXXX

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero API version: 7.0.1.2
Using interface version: 7.0.0.0
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\NeroVision
Internal Version: 7, 0, 1, 2

Recorder: Version: GBIA - HA 1 TA 0 - 7.0.1.2
Adapter driver: HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD2500JB-00GVC0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD800JB-00ETA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : ATAPI DVD RW atapi Port 1 ID 0 DMA: On
CdRomPeripheral : CD-ROM Drive/F5E atapi Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
CD-ROM Drive/F5E D: CDRom1
ATAPI DVD RW H: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523764kB)
Free physical memory: 88MB (90312kB)
Memory in use : 82
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

3.12.2005
NeroAPI
12:27:00 AM #1 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted

12:27:00 AM #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory

12:27:00 AM #3 Text 0 File Reader.cpp, Line 124
Reader running

12:27:00 AM #4 Text 0 File Writer.cpp, Line 113
Writer H: ATAPI DVD RW running

12:27:00 AM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

12:27:00 AM #6 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

12:27:00 AM #7 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media

12:27:00 AM #8 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 865103 (192:14.53, 1689MB)

12:27:00 AM #9 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)

12:27:00 AM #10 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: ATAPI DVD RW, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193

12:27:00 AM #11 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 865104 blocks [H: ATAPI DVD RW]
--------------------------------------------------------------

12:27:00 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [H: ATAPI DVD RW] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1771732992, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
865104 | lead-out | 1 | 0x41 | 0x00

12:27:00 AM #14 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

12:27:00 AM #15 Phase 24 File APIProgress.cpp, Line 278
Caching of files started

12:27:00 AM #16 Text 0 File Burncd.cpp, Line 4132
Cache writing successful.

12:27:00 AM #17 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed

12:27:00 AM #18 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 8x (11,080 KB/s)

12:27:00 AM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

12:27:00 AM #20 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode

12:27:00 AM #21 Text 0 File MMC.cpp, Line 21611
Set BUFE: Seamless Link -> ON

12:27:00 AM #22 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes

12:27:00 AM #23 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

12:30:19 AM #24 Text 0 File WriterStatus.cpp, Line 116
start writing Lead-Out at LBA 865104 (D3350h), length 0 blocks

12:30:19 AM #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

12:30:19 AM #26 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 865103

12:30:44 AM #27 Phase 37 File APIProgress.cpp, Line 278
Burn process completed successfully at 8x (11,080 KB/s)

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** NeroAPI, History File *** ======
xXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero API version: 7.0.1.2
Using interface version: 7.0.0.0
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\NeroVision
Internal Version: 7, 0, 1, 2

Recorder: Version: GBIA - HA 1 TA 0 - 7.0.1.2
Adapter driver: HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD2500JB-00GVC0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD800JB-00ETA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : ATAPI DVD RW atapi Port 1 ID 0 DMA: On
CdRomPeripheral : CD-ROM Drive/F5E atapi Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
CD-ROM Drive/F5E D: CDRom1
ATAPI DVD RW H: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523764kB)
Free physical memory: 109MB (111644kB)
Memory in use : 78
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

3.12.2005
NeroAPI
4:41:25 AM #1 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted

4:41:25 AM #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory

4:41:25 AM #3 Text 0 File Reader.cpp, Line 124
Reader running

4:41:25 AM #4 Text 0 File Writer.cpp, Line 113
Writer H: ATAPI DVD RW running

4:41:25 AM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

4:41:25 AM #6 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

4:41:25 AM #7 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media

4:41:25 AM #8 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1854015 (412:00.15, 3621MB)

4:41:25 AM #9 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)

4:41:25 AM #10 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: ATAPI DVD RW, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193

4:41:25 AM #11 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1854016 blocks [H: ATAPI DVD RW]
--------------------------------------------------------------

4:41:25 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [H: ATAPI DVD RW] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3797024768, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1854016 | lead-out | 1 | 0x41 | 0x00

4:41:25 AM #14 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

4:41:25 AM #15 Phase 24 File APIProgress.cpp, Line 278
Caching of files started

4:41:25 AM #16 Text 0 File Burncd.cpp, Line 4132
Cache writing successful.

4:41:25 AM #17 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed

4:41:25 AM #18 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 8x (11,080 KB/s)

4:41:25 AM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

4:41:25 AM #20 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode

4:41:25 AM #21 Text 0 File MMC.cpp, Line 21611
Set BUFE: Seamless Link -> ON

4:41:26 AM #22 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes

4:41:26 AM #23 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

4:48:21 AM #24 Text 0 File WriterStatus.cpp, Line 116
start writing Lead-Out at LBA 1854016 (1C4A40h), length 0 blocks

4:48:22 AM #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

4:48:22 AM #26 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 1854015

4:48:50 AM #27 Phase 37 File APIProgress.cpp, Line 278
Burn process completed successfully at 8x (11,080 KB/s)

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** NeroAPI, History File *** ======
XXXXXXXXXXXXXXXXXXXXXXXXX

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero API version: 7.0.1.2
Using interface version: 7.0.0.0
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\NeroVision
Internal Version: 7, 0, 1, 2

Recorder: Version: GBIA - HA 1 TA 0 - 7.0.1.2
Adapter driver: HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD2500JB-00GVC0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD800JB-00ETA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : ATAPI DVD RW atapi Port 1 ID 0 DMA: On
CdRomPeripheral : CD-ROM Drive/F5E atapi Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
CD-ROM Drive/F5E D: CDRom1
ATAPI DVD RW H: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523764kB)
Free physical memory: 108MB (111228kB)
Memory in use : 78
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

3.12.2005
NeroAPI
3:25:09 PM #1 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted

3:25:09 PM #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory

3:25:09 PM #3 Text 0 File Reader.cpp, Line 124
Reader running

3:25:09 PM #4 Text 0 File Writer.cpp, Line 113
Writer H: ATAPI DVD RW running

3:25:09 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

3:25:09 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

3:25:09 PM #7 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media

3:25:10 PM #8 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1623071 (360:40.71, 3170MB)

3:25:10 PM #9 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)

3:25:10 PM #10 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: ATAPI DVD RW, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193

3:25:10 PM #11 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1623072 blocks [H: ATAPI DVD RW]
--------------------------------------------------------------

3:25:10 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [H: ATAPI DVD RW] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3324051456, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1623072 | lead-out | 1 | 0x41 | 0x00

3:25:10 PM #14 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

3:25:10 PM #15 Phase 24 File APIProgress.cpp, Line 278
Caching of files started

3:25:10 PM #16 Text 0 File Burncd.cpp, Line 4132
Cache writing successful.

3:25:10 PM #17 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed

3:25:10 PM #18 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 8x (11,080 KB/s)

3:25:10 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

3:25:10 PM #20 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode

3:25:10 PM #21 Text 0 File MMC.cpp, Line 21611
Set BUFE: Seamless Link -> ON

3:25:10 PM #22 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes

3:25:10 PM #23 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

3:31:20 PM #24 Text 0 File WriterStatus.cpp, Line 116
start writing Lead-Out at LBA 1623072 (18C420h), length 0 blocks

3:31:20 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

3:31:20 PM #26 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 1623071

3:31:48 PM #27 Phase 37 File APIProgress.cpp, Line 278
Burn process completed successfully at 8x (11,080 KB/s)

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** NeroAPI, History File *** ======
Joseph M. Cavalieri
Home
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2

Recorder: Version: GBIA - HA 1 TA 0 - 7.0.1.2
Adapter driver: HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: Version: 0.28 - HA 1 TA 1 - 7.0.1.2
Adapter driver: HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD2500JB-00GVC0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD800JB-00ETA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : ATAPI DVD RW atapi Port 1 ID 0 DMA: On
CdRomPeripheral : CD-ROM Drive/F5E atapi Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
CD-ROM Drive/F5E D: CDRom1
ATAPI DVD RW H: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523764kB)
Free physical memory: 101MB (103772kB)
Memory in use : 80
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

12.12.2005
Burn DVD Image
12:12:09 AM #1 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory

12:12:09 AM #2 Text 0 File Reader.cpp, Line 124
Reader running

12:12:09 AM #3 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media

12:13:29 AM #4 Phase 40 File dlgbrnst.cpp, Line 1725
Aborted by user

12:13:29 AM #5 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)

12:13:29 AM #6 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: ATAPI DVD RW
Medium not present

12:13:29 AM #7 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: Version: GBIA - HA 1 TA 0 - 7.0.1.2
Adapter driver: HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD2500JB-00GVC0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD800JB-00ETA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : ATAPI DVD RW atapi Port 1 ID 0 DMA: On
CdRomPeripheral : CD-ROM Drive/F5E atapi Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
CD-ROM Drive/F5E D: CDRom1
ATAPI DVD RW H: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523764kB)
Free physical memory: 86MB (89000kB)
Memory in use : 83
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

14.12.2005
NeroAPI
10:36:31 PM #1 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted

10:36:32 PM #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory

10:36:32 PM #3 Text 0 File Reader.cpp, Line 124
Reader running

10:36:32 PM #4 Text 0 File Writer.cpp, Line 113
Writer H: ATAPI DVD RW running

10:36:32 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

10:36:32 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

10:36:32 PM #7 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media

10:36:33 PM #8 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1815679 (403:29.04, 3546MB)

10:36:33 PM #9 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)

10:36:33 PM #10 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: ATAPI DVD RW, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1
Disc Application Code: 64, Disc Physical Code: 193

10:36:33 PM #11 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1815680 blocks [H: ATAPI DVD RW]
--------------------------------------------------------------

10:36:33 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [H: ATAPI DVD RW] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3718512640, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1815680 | lead-out | 1 | 0x41 | 0x00

10:36:33 PM #14 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

10:36:33 PM #15 Phase 24 File APIProgress.cpp, Line 278
Caching of files started

10:36:33 PM #16 Text 0 File Burncd.cpp, Line 4132
Cache writing successful.

10:36:33 PM #17 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed

10:36:33 PM #18 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 8x (11,080 KB/s)

10:36:33 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:36:33 PM #20 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode

10:36:33 PM #21 Text 0 File MMC.cpp, Line 21611
Set BUFE: Seamless Link -> ON

10:36:33 PM #22 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes

10:36:33 PM #23 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

10:49:24 PM #24 Text 0 File WriterStatus.cpp, Line 116
start writing Lead-Out at LBA 1815680 (1BB480h), length 0 blocks

10:49:24 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

10:49:25 PM #26 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 1815679

10:49:43 PM #27 Phase 37 File APIProgress.cpp, Line 278
Burn process completed successfully at 8x (11,080 KB/s)

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** NeroAPI, History File *** ======
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero API version: 7.0.1.2
Using interface version: 7.0.0.0
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\NeroVision
Internal Version: 7, 0, 1, 2

Recorder: Version: GBIA - HA 1 TA 0 - 7.0.1.2
Adapter driver: HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD2500JB-00GVC0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD800JB-00ETA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : ATAPI DVD RW atapi Port 1 ID 0 DMA: On
CdRomPeripheral : CD-ROM Drive/F5E atapi Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
CD-ROM Drive/F5E D: CDRom1
ATAPI DVD RW H: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523764kB)
Free physical memory: 62MB (63884kB)
Memory in use : 87
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

15.12.2005
NeroAPI
5:34:47 AM #1 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted

5:34:47 AM #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory

5:34:47 AM #3 Text 0 File Reader.cpp, Line 124
Reader running

5:34:47 AM #4 Text 0 File Writer.cpp, Line 113
Writer H: ATAPI DVD RW running

5:34:47 AM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312

[ + quote]

This message has been edited since posting. Last time this message was edited on 20. December 2005 @ 03:44

ChrisC586

Senior Member

22. December 2005 @ 12:48

Link to this message

A long time getting back but after miking the ten pack dual layers they were running 5 to 7 thousandths thicker and 10 to 11 thousandths Inside Diameter to Outside Diameter wider on the ten packs I had. The center holes on both the three pack and ten pack were running the same size.The new set of ten packs I picked up yesterday are miking out to my other three packs within 1 thosandth of an inch and are fine playing on everything.I just got a bad batch of ten packs before.

[ + quote]

creaky

Moderator

25. December 2005 @ 11:14

Link to this message

@cavalieri -

Quote:
Nero Version: 7.0.1.2

- 7.0.1.4b is here - http://www.nero.com/nero7/eng/nero7-up.php

Quote:
Recorder: Version: GBIA

- i see you've been experimenting with firmware versions

Quote:
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

- Nero isn't recognising your drive

Quote:
Physical memory : 511MB (523764kB)
Free physical memory: 86MB (89000kB)
Memory in use : 83

- sufficient total memory but no free memory; you need to close down more programs prior to ALL dvd work/burning to free up more memory

Quote:
Recorder: ATAPI DVD RW, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1
Disc Application Code: 64, Disc Physical Code: 193

- ugh, those discs are ,well, not good

Quote:
Burn process completed successfully at 8x (11,080 KB/s)

you did well to burn successfully there with the above things wrong

[ + quote]

Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***

This message has been edited since posting. Last time this message was edited on 25. December 2005 @ 11:15

MaxBurn

Senior Member

26. December 2005 @ 07:09

Link to this message

Quote:
CdRomPeripheral : CD-ROM Drive/F5E atapi Port 1 ID 1 DMA: Off

DMA is off on that cd-rom drive.
How to fix it:
http://home.comcast.net/~bbmayo/checking%20DMA.pdf
and what creaky said :)

[ + quote]

Die CMC Mag!!!

cavalieri

Newbie

8. January 2006 @ 09:31

Link to this message

Ok so I did the DMA thing.. and I ripped a dvd using DVD Decrypter..When I go to burn using DVD Decrypter it says "Invalid Field in CDB" and it does not continue... I'm sorry about such the long response, I really appreciate all that is helping... I haven't a clue what is going on though...

Thanks!

[ + quote]

cavalieri

Newbie

8. January 2006 @ 09:35

Link to this message

I am just trying to burn a DVD.. How does Nero not recognize my burner when that's what it was bundled with? I experimented with firmware after calling up I/O Magic and that's what they told me to do... The firmware now is actually GBGA... Anything else anyone needs to know just ask... I need help just burning a succeessful dvd... I burned 5 dvd's when I first got it, work great! Now I can't do it at all.. Is it just the discs? I used Memorex for the first 5 and now I was trying to use HP discs and the DVD Decrypter I tried to use compusa 4x DVD-R discs.

[ + quote]

ChrisC586

Senior Member

8. January 2006 @ 14:02

Link to this message

Pick up some Verbatim DLs .Ya gotta have the good media to start with. Happy Burnin. ChrisC

[ + quote]

brobear

Suspended permanently

8. January 2006 @ 16:11

Link to this message

cavalieri
Are the burns still okay on the DVD5 media (4.7GB)?

[ + quote]

'Brobear'

I was an earth-rim walker, a lurker at the threshold of the abyss. - Grendel -

cavalieri

Newbie

9. January 2006 @ 06:52

Link to this message

That's the only thing I'm trying are single layer, I just had asked this inside of this thread because I didn't want to start a new thread and it was helpful the people that had answered already.

[ + quote]

brobear

Suspended permanently

9. January 2006 @ 07:18

Link to this message

Problems with burning DL can be different from DVD5. So, it can confuse those trying to help you if you post your DVD5 problem in a DL thread. I suggest you post your problem in the appropriate thread of start one. You're having some sort of interface problem if your drive isn't being recognized. If working with Nero, I'd suggest a Nero thread. If your OS isn't picking up the drive, then that's a different problem.

[ + quote]

'Brobear'

I was an earth-rim walker, a lurker at the threshold of the abyss. - Grendel -

Page:	< Previous	1	2

Start a new thread

afterdawn.com > forums > dvd±r discussion > dvd±r for newbies > burnng dual layers help!


		User name	Password

		Not registered yet? Register here. Lost your password? Click here.