User User name Password  
   
Friday 22.5.2026 / 16:00
Search AfterDawn Forums:        In English   Suomeksi   På svenska
afterdawn.com > forums > consoles > ps2 - general discussion > ps2 newbi!
Show topics
 
Forums
Forums
ps2 newbi!
  Jump to:
 
Posted Message
Senior Member
_
22. August 2006 @ 19:45 _ Link to this message    Send private message to this user   
There are different lasers in the same version PS2 once in a while like when they were refibuished. A Play Station 2 formated disk is a orginal PS2 game that is not copied. If u didnt put in a orginal disk if its scratched up try one thats not as scratched if it plays the laser need to be tweaked a little. And when u said a chipped laser do u mean its broken? Or modchip is installed?
Advertisement
_
__
AfterDawn Addict
_
23. August 2006 @ 01:33 _ Link to this message    Send private message to this user   
no i put in a ps1 game and it asked for the format disc and i don't know if the laser was chipped (modchipped) becuase at the front of the tray were the little ps2 sign is it keeps coming off?! and i can only get it to read audio cd's and ps1 cd's not dvds or ps2 games?

psp life = 2.6-1.5 > Custom Firmware Harley G's > 2.0 > 1.5 > C/FW XxPSPmadxX > 2.0 > 1.5 > 2.71 SE-C>swapped 2.5>2.6>1.5>2.0>1.5>3.03 OE-A>3.03OE-B/3.03OE-C
2.80 downgrading guide... http://forums.afterdawn.com/thread_view.cfm/439978
TA-082 downgrading guide.. http://forums.afterdawn.com/thread_view.cfm/441460
TA-082 2.80 downgrading guide.. http://forums.afterdawn.com/thread_view.cfm/444992
Senior Member
_
23. August 2006 @ 08:11 _ Link to this message    Send private message to this user   
It can read ps1 cd but not ps1 game. wtf do u mean your confusing me. If theres a modchipm its is very small and is on the botom of the mother board and there should be alot of wires. Can u repeat ypour self... but more clearly this time and give more detail?
AfterDawn Addict
_
23. August 2006 @ 09:34 _ Link to this message    Send private message to this user   
ok sorry mate.. her goes! on the mother board there is a small chip and there are loads of wires!! the ps2 right now plays ps1 games, audio cd's and thats it! it won tplay ps2 games and dvd's. thats about it!

psp life = 2.6-1.5 > Custom Firmware Harley G's > 2.0 > 1.5 > C/FW XxPSPmadxX > 2.0 > 1.5 > 2.71 SE-C>swapped 2.5>2.6>1.5>2.0>1.5>3.03 OE-A>3.03OE-B/3.03OE-C
2.80 downgrading guide... http://forums.afterdawn.com/thread_view.cfm/439978
TA-082 downgrading guide.. http://forums.afterdawn.com/thread_view.cfm/441460
TA-082 2.80 downgrading guide.. http://forums.afterdawn.com/thread_view.cfm/444992
Senior Member
_
23. August 2006 @ 09:39 _ Link to this message    Send private message to this user   
yea then the previous owner had a modchip installed but i donno if it was successfully installed or a bad install? Ask your friend about it if he never got burned games to work and/or the install look realy messy chances are if doesnt work and might be interfering the other stuff take out that power wire and ground wire and see how it goes. Power and Ground wire should be a thicker wire than the rest. A pict of the chip/install would help
AfterDawn Addict
_
23. August 2006 @ 09:47 _ Link to this message    Send private message to this user   
umm...this might sound stupid but how can i get a pic c of it on afterdawn? and shall i try putn the laser of my other working ps2 into this one and see what happens and this laser into the other ps2? but if i switch them back again im scared that then both ps2 wont work ?!

psp life = 2.6-1.5 > Custom Firmware Harley G's > 2.0 > 1.5 > C/FW XxPSPmadxX > 2.0 > 1.5 > 2.71 SE-C>swapped 2.5>2.6>1.5>2.0>1.5>3.03 OE-A>3.03OE-B/3.03OE-C
2.80 downgrading guide... http://forums.afterdawn.com/thread_view.cfm/439978
TA-082 downgrading guide.. http://forums.afterdawn.com/thread_view.cfm/441460
TA-082 2.80 downgrading guide.. http://forums.afterdawn.com/thread_view.cfm/444992
Senior Member
_
23. August 2006 @ 09:49 _ Link to this message    Send private message to this user   
Just upload it on imageshack.us and post a link. I dont think u should try u never know if someone mobo might have something wrong that could mess up your laser.
AfterDawn Addict
_
23. August 2006 @ 10:02 _ Link to this message    Send private message to this user   
ok here is the pic what other pics do you want? http://img217.imageshack.us/img217/3830/image001ao5.jpg
and here is the tray thing http://img504.imageshack.us/img504/6664/image002vn5.jpg
and heres the mother board with the modchip! http://img181.imageshack.us/img181/5285/image003jy1.jpg

psp life = 2.6-1.5 > Custom Firmware Harley G's > 2.0 > 1.5 > C/FW XxPSPmadxX > 2.0 > 1.5 > 2.71 SE-C>swapped 2.5>2.6>1.5>2.0>1.5>3.03 OE-A>3.03OE-B/3.03OE-C
2.80 downgrading guide... http://forums.afterdawn.com/thread_view.cfm/439978
TA-082 downgrading guide.. http://forums.afterdawn.com/thread_view.cfm/441460
TA-082 2.80 downgrading guide.. http://forums.afterdawn.com/thread_view.cfm/444992

This message has been edited since posting. Last time this message was edited on 23. August 2006 @ 10:18

AfterDawn Addict
_
23. August 2006 @ 10:22 _ Link to this message    Send private message to this user   
yeah and also because this one is modded can i put this mother board into the other ps2 and play back ups? there both the same version ps2 v7!

psp life = 2.6-1.5 > Custom Firmware Harley G's > 2.0 > 1.5 > C/FW XxPSPmadxX > 2.0 > 1.5 > 2.71 SE-C>swapped 2.5>2.6>1.5>2.0>1.5>3.03 OE-A>3.03OE-B/3.03OE-C
2.80 downgrading guide... http://forums.afterdawn.com/thread_view.cfm/439978
TA-082 downgrading guide.. http://forums.afterdawn.com/thread_view.cfm/441460
TA-082 2.80 downgrading guide.. http://forums.afterdawn.com/thread_view.cfm/444992
Senior Member
_
23. August 2006 @ 20:26 _ Link to this message    Send private message to this user   
... the modchip pict...damn... its looks good but messy. The modchip looks like a cheap chip, the NH7
http://www.divineo.cn/cgi-bin/div-cn/ps2-nh7
If u have a solder iron (dont pull it out with your hands) remove the VCC3 wire (the modchip power wire) & gGND with (ground) on the modchip not mobo, and see if the PS2 would work. Use your other V 7 laser and put it in the broken one after u remove the modchip power wire & gnd. and make sure that wire doesnt touch anything else. I think the modchip is the cause that it doesnt read games.

This message has been edited since posting. Last time this message was edited on 23. August 2006 @ 20:37

AfterDawn Addict
_
24. August 2006 @ 02:17 _ Link to this message    Send private message to this user   
ok listen im sooo sory but i dont have a soldering iron and i dont know which one is the ground wire and the power wire?! do you have a pic or tutoral of the wire'(s) i need to remove? and the url for that chip u gave me was infact the chip in the mother board. oh and by the way it plays audio cd's and ps1 games now. i tried changing the mother board ont the other ps2 and it wouldn play the ps2 games, it said please insert ps2 format disc so i think it is the chip.

psp life = 2.6-1.5 > Custom Firmware Harley G's > 2.0 > 1.5 > C/FW XxPSPmadxX > 2.0 > 1.5 > 2.71 SE-C>swapped 2.5>2.6>1.5>2.0>1.5>3.03 OE-A>3.03OE-B/3.03OE-C
2.80 downgrading guide... http://forums.afterdawn.com/thread_view.cfm/439978
TA-082 downgrading guide.. http://forums.afterdawn.com/thread_view.cfm/441460
TA-082 2.80 downgrading guide.. http://forums.afterdawn.com/thread_view.cfm/444992

This message has been edited since posting. Last time this message was edited on 24. August 2006 @ 02:56

Senior Member
_
24. August 2006 @ 08:18 _ Link to this message    Send private message to this user   
Hmmm..yea, maybe swich the good laser to the broken PS2 and leave it there for now because your old laser might not have the proper adjustment on the pot. And then remove 2 wires (my net is so freaking slow for some reason today)... picts dont load really good. But the two wires u should remove is the one that is marked VCC3 & GND on the modchip next to the pins. U will need to un solder it out or maybe cut them close to the modchip.

This message has been edited since posting. Last time this message was edited on 24. August 2006 @ 09:10

AfterDawn Addict
_
24. August 2006 @ 09:10 _ Link to this message    Send private message to this user   
ok i will do this but how will i know how to adjust the pots? or were to adjust them too?

psp life = 2.6-1.5 > Custom Firmware Harley G's > 2.0 > 1.5 > C/FW XxPSPmadxX > 2.0 > 1.5 > 2.71 SE-C>swapped 2.5>2.6>1.5>2.0>1.5>3.03 OE-A>3.03OE-B/3.03OE-C
2.80 downgrading guide... http://forums.afterdawn.com/thread_view.cfm/439978
TA-082 downgrading guide.. http://forums.afterdawn.com/thread_view.cfm/441460
TA-082 2.80 downgrading guide.. http://forums.afterdawn.com/thread_view.cfm/444992
Senior Member
_
24. August 2006 @ 09:15 _ Link to this message    Send private message to this user   
Well u will hafta adjust and try cause i dont know of any other ways.
AfterDawn Addict
_
24. August 2006 @ 09:21 _ Link to this message    Send private message to this user   
ok you know the chip i have itfront of me and all teh wires are connected properly except one and thats the end of gnd shall i post a picture. cuz if i can fix the chip then i can play backuped games!!

psp life = 2.6-1.5 > Custom Firmware Harley G's > 2.0 > 1.5 > C/FW XxPSPmadxX > 2.0 > 1.5 > 2.71 SE-C>swapped 2.5>2.6>1.5>2.0>1.5>3.03 OE-A>3.03OE-B/3.03OE-C
2.80 downgrading guide... http://forums.afterdawn.com/thread_view.cfm/439978
TA-082 downgrading guide.. http://forums.afterdawn.com/thread_view.cfm/441460
TA-082 2.80 downgrading guide.. http://forums.afterdawn.com/thread_view.cfm/444992

This message has been edited since posting. Last time this message was edited on 24. August 2006 @ 09:21

Senior Member
_
24. August 2006 @ 09:30 _ Link to this message    Send private message to this user   
Well first u should fix your laser issues and i think the modchip isnt working properly. Well connecting the ground isnt going to help as much anyway. if u wanna get the modchip working i sugess getting a solder iron and remove all the wires thats on the modchip, not the PS2 mobo and arrange the wires and tape them down try not to let the wires cross one another as much and dont let the wire go over the modchip. U might need to move the chip closer. And solder the wires back to the modchoip. dont think about removing the wires on the PS2 mobo because its hard to solder in. And the Ground and power wire should be short
AfterDawn Addict
_
24. August 2006 @ 09:32 _ Link to this message    Send private message to this user   
yeah the power wire is short but the ground is farrr and the end of the grond wire is soldered to another peice of wire which is then soldered onto the mobo but that has now come off. shall i just cut the two wires then from then chip? cuz i dont have a solder now but i will get one

psp life = 2.6-1.5 > Custom Firmware Harley G's > 2.0 > 1.5 > C/FW XxPSPmadxX > 2.0 > 1.5 > 2.71 SE-C>swapped 2.5>2.6>1.5>2.0>1.5>3.03 OE-A>3.03OE-B/3.03OE-C
2.80 downgrading guide... http://forums.afterdawn.com/thread_view.cfm/439978
TA-082 downgrading guide.. http://forums.afterdawn.com/thread_view.cfm/441460
TA-082 2.80 downgrading guide.. http://forums.afterdawn.com/thread_view.cfm/444992

This message has been edited since posting. Last time this message was edited on 24. August 2006 @ 09:33

Senior Member
_
24. August 2006 @ 09:35 _ Link to this message    Send private message to this user   
Yea just cut it close to the modchip
AfterDawn Addict
_
24. August 2006 @ 09:40 _ Link to this message    Send private message to this user   
ok 2 secs and ill re assemble and let u no if it works ok

psp life = 2.6-1.5 > Custom Firmware Harley G's > 2.0 > 1.5 > C/FW XxPSPmadxX > 2.0 > 1.5 > 2.71 SE-C>swapped 2.5>2.6>1.5>2.0>1.5>3.03 OE-A>3.03OE-B/3.03OE-C
2.80 downgrading guide... http://forums.afterdawn.com/thread_view.cfm/439978
TA-082 downgrading guide.. http://forums.afterdawn.com/thread_view.cfm/441460
TA-082 2.80 downgrading guide.. http://forums.afterdawn.com/thread_view.cfm/444992
Senior Member
_
24. August 2006 @ 09:44 _ Link to this message    Send private message to this user   
AfterDawn Addict
_
24. August 2006 @ 09:48 _ Link to this message    Send private message to this user   
there are no wires there thou?! i cut of the wire that said 'gnd' on the chip it self along with the power, also if i take out the laser from my other ps2 will change the settings in anyway cuz thats the only ps2 that works i dont want that to get ruined aswell?!

psp life = 2.6-1.5 > Custom Firmware Harley G's > 2.0 > 1.5 > C/FW XxPSPmadxX > 2.0 > 1.5 > 2.71 SE-C>swapped 2.5>2.6>1.5>2.0>1.5>3.03 OE-A>3.03OE-B/3.03OE-C
2.80 downgrading guide... http://forums.afterdawn.com/thread_view.cfm/439978
TA-082 downgrading guide.. http://forums.afterdawn.com/thread_view.cfm/441460
TA-082 2.80 downgrading guide.. http://forums.afterdawn.com/thread_view.cfm/444992
Senior Member
_
24. August 2006 @ 09:51 _ Link to this message    Send private message to this user   
The pict i post are some other place closer that u can ground the chip. Swiching the laser wouldnt do any harm to the other PS2. But ne careful not to rip the ribbon under the laser, though
Senior Member
_
24. August 2006 @ 09:53 _ Link to this message    Send private message to this user   
if u dont want to swich the laser. Get a soldering iron and take off the wires on the modchip and tape the ends so they wont touch anything and start changing the pots until u get that laser to play PS2 games. Btw do u use AIM, or Yahoo or something
AfterDawn Addict
_
24. August 2006 @ 09:55 _ Link to this message    Send private message to this user   
yeah i use msn (windows live) pm mail your addy and you can help me out yeah?

psp life = 2.6-1.5 > Custom Firmware Harley G's > 2.0 > 1.5 > C/FW XxPSPmadxX > 2.0 > 1.5 > 2.71 SE-C>swapped 2.5>2.6>1.5>2.0>1.5>3.03 OE-A>3.03OE-B/3.03OE-C
2.80 downgrading guide... http://forums.afterdawn.com/thread_view.cfm/439978
TA-082 downgrading guide.. http://forums.afterdawn.com/thread_view.cfm/441460
TA-082 2.80 downgrading guide.. http://forums.afterdawn.com/thread_view.cfm/444992
Advertisement
_
__
 
_
Senior Member
_
24. August 2006 @ 09:56 _ Link to this message    Send private message to this user   
dang it i dont use MSN. Well ill help u at night or something. hafta leave now
 
Related links
For more PS2 discussion, please visit our sister site, Blasteroids.com
Read our PS2 backup tutorial & information package
 
Related forum topics Posts Last post Forum room
WATCH: DVD player used to hack PS2 3 16. July 2020 News comments
First PS2 games on PS4 available now including GTA, Twisted Metal 10 13. December 2015 News comments
Sony: PlayStation 4 very likely to surpass PS2 in profitability 19 10. June 2014 News comments
ps2 can display 3 1. June 2014 PS2 - General discussion
how to mod a ps2 1 16. May 2014 PS2 - General discussion
Two PS2 Slims - One Accepts Swap Magic, one doesnt... All Detail inside 1 1. May 2014 PS2 - DVD backup discussion
How to burn PS2 games with Free McBoot 2 20. April 2014 PS2 - Software boot discussion
PS2 Hard Drive Loader 1 1. April 2014 PS2 - General discussion
Convert from PS2 to TV format? 1 4. March 2014 Convert video to another format
PS2 AR Max Hardware problem 4 21. January 2014 PS2 - General discussion

 
afterdawn.com > forums > consoles > ps2 - general discussion > ps2 newbi!
 

Digital video: AfterDawn.com | AfterDawn Forums
Music: MP3Lizard.com
Gaming: Blasteroids.com | Blasteroids Forums | Compare game prices
Software: Software downloads
Blogs: User profile pages
RSS feeds: AfterDawn.com News | Software updates | AfterDawn Forums
International: AfterDawn in Finnish | AfterDawn in Swedish | AfterDawn in Norwegian | download.fi
Navigate: Search | Site map
About us: About AfterDawn Ltd | Advertise on our sites | Rules, Restrictions, Legal disclaimer & Privacy policy
Contact us: Send feedback | Contact our media sales team
 
  © 1999-2026 by AfterDawn Ltd.

  IDG TechNetwork