|
|
|
Burn Error
|
|
|
kwmj
Newbie
|
21. March 2007 @ 19:55 |
Link to this message
|
I decided to try to remove the one HDD that I could not get to go to the DMA Mode, but unfortunately, that did not help either.
I have now bought some Sony DVD+R and Verbatim DVD+R, and the exact same problem comes up with the both of them.
Since the log is showing an error that would normally indicate bad media, despite that fact that I am using some of the best stuff available, is there a possibility that there may be a problem with the drive itself, as in it might be defective? I have now tried 7 types of media, same problem with them all.
I have done everything I can find in the forums, and all of what you guys have suggested at least twice, plus quite a few things I have thought of myself, and nothing has made any improvement at all. It just seems to me like we have eliminated most everything else as a possible cause, except for the drive itself. Is it possible?
kwmj
|
|
Advertisement
|
|
|
|
|
kwmj
Newbie
|
21. March 2007 @ 20:02 |
Link to this message
|
Here is my Burn Error log with using the Sony DVD+R 16x media. I have even tried slowing down the recording speed to 8x, 4x, 2.4x and 1x, but that has not helped at all either.
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero API version: 7.5.9.0
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 5, 9, 0
Recorder: <HP DVD Writer 840b> Version: HJ86 - HA 1 TA 0 - 7.5.9.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6L300S0 iaStor Port 0 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 840b atapi Port 1 ID 0 DMA: On
CdRomPeripheral : IDE-DVD DROM6216 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HP DVD Writer 840b F: CDRom0
IDE-DVD DROM6216 G: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 2047MB (2097151kB)
Memory in use : 19 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.3.2007
NeroAPI
12:12:17 AM #1 Phase 112 File APIProgress.cpp, Line 282
DVD-Video files reallocation started
12:12:17 AM #2 Phase 114 File APIProgress.cpp, Line 282
DVD-Video files reallocation completed (no file modified)
12:12:17 AM #3 Phase 111 File APIProgress.cpp, Line 282
DVD-Video files sorted
12:12:17 AM #4 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
12:12:17 AM #5 Text 0 File AudioCompilationImpl.cpp, Line 838
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
12:12:17 AM #6 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)
12:12:17 AM #7 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)
12:12:17 AM #8 Text 0 File Burncd.cpp, Line 3451
Turn on Disc-At-Once, using DVD media
12:12:17 AM #9 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2282831 (507:17.56, 4458MB)
12:12:17 AM #10 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO
12:12:17 AM #11 Text 0 File DlgWaitCD.cpp, Line 2903
Recorder: HP DVD Writer 840b, Media type: DVD+R
Disc Manufacturer ID: SONY, Media Type ID: D21, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
12:12:17 AM #12 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:12:17 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 821
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2282832 (2282832) = #2282832/507:17.57
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2282832 blocks [F: HP DVD Writer 840b]
--------------------------------------------------------------
12:12:17 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1024
Prepare [F: HP DVD Writer 840b] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4675239936, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 2282832 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2282832 | 0 | 0x00
2282832 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
12:12:17 AM #15 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
12:12:17 AM #16 Phase 24 File APIProgress.cpp, Line 282
Caching of files started
12:12:17 AM #17 Text 0 File Burncd.cpp, Line 4278
Cache writing successful.
12:12:17 AM #18 Phase 25 File APIProgress.cpp, Line 282
Caching of files completed
12:12:17 AM #19 Phase 36 File APIProgress.cpp, Line 282
Burn process started at 4x (5,540 KB/s)
12:12:17 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2743
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:12:17 AM #21 Text 0 File Cdrdrv.cpp, Line 9234
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: SONY....
Media type ID: D21
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 53 4F 4E 59 00 - 00 00 00 44 32 31 00 38 ...SONY....D21.8
23 54 37 14 00 28 6E 00 - 80 69 17 19 0C 0C 0A 0B #T7..(n..i......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................
12:12:18 AM #22 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
Buffer x040bc680: Len x648
12:12:18 AM #23 Text 0 File DVDPlusRW.cpp, Line 674
Start write address at LBA 0
DVD high compatibility mode: Yes
12:12:37 AM #24 SPTI -1135 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x80
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 0C 80
Buffer x05b50040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
12:12:37 AM #25 CDR -1135 File Writer.cpp, Line 299
Write error
F: HP DVD Writer 840b
12:12:37 AM #26 Phase 127 File APIProgress.cpp, Line 282
Generating DVD high compatibility borders
12:12:37 AM #27 Phase 129 File APIProgress.cpp, Line 282
Generating DVD borders completed successfully
12:12:37 AM #28 Phase 38 File APIProgress.cpp, Line 282
Burn process failed at 4x (5,540 KB/s)
12:12:37 AM #29 Text 0 File AudioCompilationImpl.cpp, Line 863
DRM: DRM burn session terminated.
12:12:37 AM #30 Text 0 File AudioCompilationImpl.cpp, Line 892
DRM: Closing entire DRM handling. Bye.
12:12:37 AM #31 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
12:12:44 AM #32 Text 0 File Cdrdrv.cpp, Line 10467
DriveLocker: UnLockVolume completed
12:12:44 AM #33 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
File 'Drivers\PXHELP20.SYS': Ver=3.00.41a, size=36560 bytes, created 9/27/2006 5:53:22 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
kwmj
|
|
kwmj
Newbie
|
21. March 2007 @ 20:09 |
Link to this message
|
Here is the Burn Error log while using the Verbatim DVD+R.
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero API version: 7.5.9.0
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 5, 9, 0
Recorder: <HP DVD Writer 840b> Version: HJ86 - HA 1 TA 0 - 7.5.9.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6L300S0 iaStor Port 0 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 840b atapi Port 1 ID 0 DMA: On
CdRomPeripheral : IDE-DVD DROM6216 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HP DVD Writer 840b F: CDRom0
IDE-DVD DROM6216 G: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 2047MB (2097151kB)
Memory in use : 19 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.3.2007
NeroAPI
12:28:33 AM #1 Phase 112 File APIProgress.cpp, Line 282
DVD-Video files reallocation started
12:28:33 AM #2 Phase 114 File APIProgress.cpp, Line 282
DVD-Video files reallocation completed (no file modified)
12:28:33 AM #3 Phase 111 File APIProgress.cpp, Line 282
DVD-Video files sorted
12:28:33 AM #4 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
12:28:33 AM #5 Text 0 File AudioCompilationImpl.cpp, Line 838
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
12:28:33 AM #6 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)
12:28:33 AM #7 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)
12:28:33 AM #8 Text 0 File Burncd.cpp, Line 3451
Turn on Disc-At-Once, using DVD media
12:28:33 AM #9 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2282831 (507:17.56, 4458MB)
12:28:33 AM #10 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO
12:28:33 AM #11 Text 0 File DlgWaitCD.cpp, Line 2903
Recorder: HP DVD Writer 840b, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
12:28:33 AM #12 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:28:33 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 821
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2282832 (2282832) = #2282832/507:17.57
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2282832 blocks [F: HP DVD Writer 840b]
--------------------------------------------------------------
12:28:33 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1024
Prepare [F: HP DVD Writer 840b] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4675239936, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 2282832 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2282832 | 0 | 0x00
2282832 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
12:28:33 AM #15 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
12:28:33 AM #16 Phase 24 File APIProgress.cpp, Line 282
Caching of files started
12:28:33 AM #17 Text 0 File Burncd.cpp, Line 4278
Cache writing successful.
12:28:33 AM #18 Phase 25 File APIProgress.cpp, Line 282
Caching of files completed
12:28:33 AM #19 Phase 36 File APIProgress.cpp, Line 282
Burn process started at 4x (5,540 KB/s)
12:28:33 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2743
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:28:33 AM #21 Text 0 File Cdrdrv.cpp, Line 9234
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MCC.....
Media type ID: 004
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38 ...MCC.....004.8
23 54 37 12 02 54 6C 02 - 92 5F 15 15 0B 0B 08 08 #T7..Tl.._......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
12:28:33 AM #22 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
Buffer x04ab3940: Len x648
12:28:33 AM #23 Text 0 File DVDPlusRW.cpp, Line 674
Start write address at LBA 0
DVD high compatibility mode: Yes
12:28:57 AM #24 SPTI -1135 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x80
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 0C 80
Buffer x05b50040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
12:28:57 AM #25 CDR -1135 File Writer.cpp, Line 299
Write error
F: HP DVD Writer 840b
12:28:57 AM #26 Phase 127 File APIProgress.cpp, Line 282
Generating DVD high compatibility borders
12:28:57 AM #27 Phase 129 File APIProgress.cpp, Line 282
Generating DVD borders completed successfully
12:28:57 AM #28 Phase 38 File APIProgress.cpp, Line 282
Burn process failed at 4x (5,540 KB/s)
12:28:57 AM #29 Text 0 File AudioCompilationImpl.cpp, Line 863
DRM: DRM burn session terminated.
12:28:57 AM #30 Text 0 File AudioCompilationImpl.cpp, Line 892
DRM: Closing entire DRM handling. Bye.
12:28:57 AM #31 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
12:29:03 AM #32 Text 0 File Cdrdrv.cpp, Line 10467
DriveLocker: UnLockVolume completed
12:29:03 AM #33 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
File 'Drivers\PXHELP20.SYS': Ver=3.00.41a, size=36560 bytes, created 9/27/2006 5:53:22 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
kwmj
This message has been edited since posting. Last time this message was edited on 21. March 2007 @ 20:10
|
|
PacMan777
AfterDawn Addict
|
22. March 2007 @ 00:34 |
Link to this message
|
Your firmware appears to need updating. You should give that a try first. Don't worry if you see 840i instead of 840b, they're the same. Once you select your OS, you'll see both i and b listed together.
http://h10025.www1.hp.com/ewfrf/wc/softw...n&lang=en&cc=us
Upgrade the firmware and see if that makes a difference first.
You've tried enough of the good stuff, it doesn't appear to be the DVDs. You don't need to drop below 4X and 8X is the norm for most users nowadays. I split the difference at 6X, though my system is capable of safer higher speeds. I don't care to push my luck for saving just a few minutes off a still lengthy process.
If you have an extra burner you could slip in, it would be about time to slip one in to see if it makes a difference. Make sure it's firmware is up to date, if you have one. Quickest way to eliminate a faulty drive possibility is to swap in a known good one.
You may want to try another burner program to see if that works. Record your output to the hard drive and use ImgBurn, free, to do the burn. If you have a Video_TS, you use ImgBurn in Build mode and select Device (your burner) under output. If you have multiple program failure, the firmware is updated, and we know the media is likely good, and the Nero program isn't corrupted, then it may be time to look to the hardware. Note below what I said about your Nero.
I noticed at the top of your log that two versions of Wnaspi are present when Nero is trying to run. That means the program is seeing 2 possible interfaces to the burner at the same time. Hopefully that's just a remnant from an older version of Nero and you've not been tampering with an ASPI layer. If you have, use ForceASPI 1.8 to check your install and make sure it's done right. It can be done the wrong way. aspichk is the tool to check the ASPI layer. I'm not saying that's the cause, but it looks like the Nero program may be corrupted. Also I noticed internal version 6.3.1.4 and there shouldn't be a version number from Nero 6, even if some people have a working program where it appears. I used Nero's cleaner tool to clean away all remnants of the older program versions from Nero before installing Nero 7. The tool can be found at the Nero site. I was having problems and used both the Nero 6 and Nero 7 cleaner tool just to make sure. You may want to give that a try. When done visit the Program Files folder to make sure the Nero folder is gone and use a registry cleaner before rebooting and doing the install. Be sure to save your serial as you'll need it to activate your new install.
Once you've done the cleaning and done a clean install of Nero try one of the new Verbs or Sonys and give us another log.
This message has been edited since posting. Last time this message was edited on 22. March 2007 @ 00:58
|
|
kwmj
Newbie
|
22. March 2007 @ 04:37 |
Link to this message
|
Tried to update firmware, but when it goes to update it, it comes up saying that the one I am trying to install is either an older or equivalent version. I believe it's the equivalent according to what it was showing on the screen.
I am going to work on the ASPI layers. I do have two ASPI's installed, but that is a result of one of the fixes I tried, but I guess it's possible that could now be adding to the problem. I had the Nero ASPI already installed and used the Adaptec ASPI program to see if that could fix my problem. It looks like the ForceASPI uses the Adaptec files, it just forces the system to accept them. I'll try that and see how it goes, and if no luck, I'll try the other things too.
kwmj
|
|
kwmj
Newbie
|
22. March 2007 @ 06:41 |
Link to this message
|
I uninstalled Nero again, but this time used the clean-up tools that you recommended. Then I reinstalled Nero, and gave it try and still the same thing.
I know the Nero I installed isn't the most current version, but it's only a coupl months old at best. I was trying to download the newest version from Nero, but their download site is going super slow, and was estimating 8 hours to download a file that I could normally do in 10-15 minutes. I will try the newer Nero version once I can download it, but I don't think thats going to solve the problem. I think I will try another burner if I can, and see where I stand from there. Thanks again for the help.
Here's my newest burn error log......
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero API version: 7.5.9.0
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 5, 9, 0
Recorder: <HP DVD Writer 840b> Version: HJ86 - HA 1 TA 0 - 7.5.9.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6L300S0 iaStor Port 0 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 840b atapi Port 1 ID 0 DMA: On
CdRomPeripheral : IDE-DVD DROM6216 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HP DVD Writer 840b F: CDRom0
IDE-DVD DROM6216 G: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 2047MB (2097151kB)
Memory in use : 16 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.3.2007
NeroAPI
11:34:48 AM #1 Phase 112 File APIProgress.cpp, Line 282
DVD-Video files reallocation started
11:34:48 AM #2 Phase 114 File APIProgress.cpp, Line 282
DVD-Video files reallocation completed (no file modified)
11:34:48 AM #3 Phase 111 File APIProgress.cpp, Line 282
DVD-Video files sorted
11:34:48 AM #4 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
11:34:48 AM #5 Text 0 File AudioCompilationImpl.cpp, Line 838
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
11:34:48 AM #6 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)
11:34:48 AM #7 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)
11:34:48 AM #8 Text 0 File Burncd.cpp, Line 3451
Turn on Disc-At-Once, using DVD media
11:34:49 AM #9 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1957167 (434:55.42, 3822MB)
11:34:49 AM #10 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO
11:34:49 AM #11 Text 0 File DlgWaitCD.cpp, Line 2903
Recorder: HP DVD Writer 840b, Media type: DVD+R
Disc Manufacturer ID: SONY, Media Type ID: D21, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
11:34:49 AM #12 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:34:49 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 821
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1957168 (1957168) = #1957168/434:55.43
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1957168 blocks [F: HP DVD Writer 840b]
--------------------------------------------------------------
11:34:49 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1024
Prepare [F: HP DVD Writer 840b] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4008280064, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 1957168 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1957168 | 0 | 0x00
1957168 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
11:34:49 AM #15 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
11:34:49 AM #16 Phase 24 File APIProgress.cpp, Line 282
Caching of files started
11:34:49 AM #17 Text 0 File Burncd.cpp, Line 4278
Cache writing successful.
11:34:49 AM #18 Phase 25 File APIProgress.cpp, Line 282
Caching of files completed
11:34:49 AM #19 Phase 36 File APIProgress.cpp, Line 282
Burn process started at 4x (5,540 KB/s)
11:34:49 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2743
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:34:49 AM #21 Text 0 File Cdrdrv.cpp, Line 9234
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: SONY....
Media type ID: D21
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 53 4F 4E 59 00 - 00 00 00 44 32 31 00 38 ...SONY....D21.8
23 54 37 14 00 28 6E 00 - 80 69 17 19 0C 0C 0A 0B #T7..(n..i......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................
11:34:49 AM #22 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
Buffer x03ca1680: Len x648
11:34:49 AM #23 Text 0 File DVDPlusRW.cpp, Line 674
Start write address at LBA 0
DVD high compatibility mode: Yes
11:35:23 AM #24 SPTI -1135 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x80
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 0C 80
Buffer x06520040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
11:35:23 AM #25 CDR -1135 File Writer.cpp, Line 299
Write error
F: HP DVD Writer 840b
11:35:23 AM #26 Phase 127 File APIProgress.cpp, Line 282
Generating DVD high compatibility borders
11:35:23 AM #27 Phase 129 File APIProgress.cpp, Line 282
Generating DVD borders completed successfully
11:35:24 AM #28 Phase 38 File APIProgress.cpp, Line 282
Burn process failed at 4x (5,540 KB/s)
11:35:24 AM #29 Text 0 File AudioCompilationImpl.cpp, Line 863
DRM: DRM burn session terminated.
11:35:24 AM #30 Text 0 File AudioCompilationImpl.cpp, Line 892
DRM: Closing entire DRM handling. Bye.
11:35:24 AM #31 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
11:35:31 AM #32 Text 0 File Cdrdrv.cpp, Line 10467
DriveLocker: UnLockVolume completed
11:35:31 AM #33 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.41a, size=36560 bytes, created 9/27/2006 5:53:22 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
kwmj
This message has been edited since posting. Last time this message was edited on 22. March 2007 @ 06:42
|
|
Advertisement
|
|
|
|
PacMan777
AfterDawn Addict
|
22. March 2007 @ 09:52 |
Link to this message
|
Out of curiosity, what version of ForceASPI did you use? As I may have mentioned, I've yet to see ASPI cure a problem like this. Programs such as Nero that use an ASPI layer include their own. I've run XP for years without the need to add an ASPI layer. If there is a specific need for it, I can see adding ASPI. The nice thing is if the ASPI is installed properly, it doesn't hurt anything. What did the aspichk tool say?
I installed Nero 7 from the discs and only recently did an update. Note there is only a WnASPI version and the 6.3.1.4 internal version number is absent. I've had other users comment on having the internal version 6.3.1.4 and their system worked fine. I'm left wondering what the version represents. Nero ROM and Express start with the number 7. The version depends on the program used, but the ROM and Express share the same version number. I was burning with Express. Note also at the end I have nothing listed in Existing Drivers: XP doesn't need them. You have the ASPI driver you added. Where did the driver for Win 2K come from? I realize this doesn't help much, but just wanted you to see what a streamlined functioning system looked like. It shouldn't need all those fixes to work properly.
Here's what the beginning and end of my log look like, the body is uneventful so I clipped it.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 11:54:32 AM
NT-SPTI used
Nero Version: 7.0.1.3
Internal Version: 7, 0, 1, 3
(Nero Express)
Recorder: <PLEXTOR DVDR PX-716AL> Version: 1.02 - HA 1 TA 0 - 7.0.1.3
Adapter driver: <IDE> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PLEXTOR DVDR PX-716AL >Version: 1.02 - HA 1 TA 0 - 7.0.1.3
Adapter driver: <IDE> HA 1
...
10:39:16 PM #39 Phase 37 File dlgbrnst.cpp, Line 1725
Burn process completed successfully at 6x (8,310 KB/s)
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Let us know how burning with another program works out.
I noticed NeroAPI in your log and it leaves me wondering how you're using Nero. What program are you using and is it together with another program outside the Nero suite?
This message has been edited since posting. Last time this message was edited on 22. March 2007 @ 10:42
|
|
